Strasser, Michael; Ikehara, Ken; Everest, Jeremy D; Maeda, Lena; Hochmuth, Katharina; Grant, Hannah; Stewart, Margaret S; Sakurai, Noriaki; Yokoyama, Takahiro; Bao, Rui; Bellanova, Piero; Brunet, Morgane; Cai, Zhirong; Cattaneo, Antonio; Hsiung, Kan-Hsi; Huang, Jyh-Jaan Steven; Ishizawa, Tahashi; Itaki, Takuya; Jitsuno, Kana; Johnson, Joel E; Kanamatsu, Toshiya; Keep, Myra; Kioka, Arata; Kölling, Martin; Luo, Min; März, Christian; McHugh, Cecilia M G; Micallef, Aaron; Nagahashi, Yoshitaka; Pandey, Dhananjai K; Proust, Jean-Noël; Rasbury, Troy; Riedinger, Natascha; Satoguchi, Yasufumi; Sawyer, Derek E.; Seibert, Chloé; Silver, Maxwell; Straub, Susanne M; Virtasalo, Joonas J; Wang, Yong Hong; Wu, Ting-Wei; Zellers, Sarah D (2025): Shear strength (fall cone) from IODP Hole 386-M0081C [dataset]. PANGAEA, https://doi.pangaea.de/10.1594/PANGAEA.975408 (DOI registration in progress)
Always quote citation above when using data! You can download the citation in several formats below.
Published: 2025-02-26
Abstract:
Undrained shear strength data from fall cone testing of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections at an interval of approx. 1 meter using an ELE International fall cone penetrometer (STANDARD BS1377) with the following cone specifications: 35 mm cone, 30 degrees angle, around 30 g, stainless steel, 3.25 (+/-0.05) mm rod diameter. The fall cone penetrometer measures the penetration of a cone as it free falls and embeds itself in the sediment. During testing, the cone (pointing downward) was lowered, so that it just touched the surface of the split core before it was locked in place with the dial gauge reading noted. Undrained shear strength was determined using the empirical formula determined by Hansbo (1957, http://urn.kb.se/resolve?urn=urn:nbn:se:swedgeo:diva-356). The formula of Hansbo (1957) may be inadequate for silty sediment (present in some Expedition 386 cores); therefore, fall cone measurements were obtained preferably in clay-dominated intervals. In three cases (386-M0081B-1H-21,25.5; 386-M0088D-1H-7,25.5; 386-M0091B-1H-10,25.5), data collection was not successful for different reasons (IT problems, human failure). For the sake of completeness, however, the "Sample labels" were nevertheless noted and results left empty.
For further methodological information see methods chapter in Strasser, M. et al., 2023 https://doi.org/10.14379/iodp.proc.386.102.2023
Related to:
Strasser, Michael; Ikehara, Ken; Everest, Jeremy D; IODP Expedition 386 Scientists (2023): Japan Trench Paleoseismology. Proceedings of the International Ocean Discovery Program, International Ocean Discovery Program, 386, https://doi.org/10.14379/iodp.proc.386.2023
Project(s):
Coverage:
Latitude: 36.071450 * Longitude: 142.735433
Date/Time Start: 2021-04-22T00:00:00 * Date/Time End: 2021-04-22T00:00:00
Minimum DEPTH, sediment/rock: 0.255 m * Maximum DEPTH, sediment/rock: 0.255 m
Event(s):
386-M0081C (JTPS-01A) * Latitude: 36.071450 * Longitude: 142.735433 * Date/Time Start: 2021-04-22T00:00:00 * Date/Time End: 2021-04-22T00:00:00 * Elevation: -8020.0 m * Location: Japan Trench * Campaign: Exp386 * Basis: Kaimei * Method/Device: Trigger corer (TC) * Comment: IGSN: IBCR0386EHJ1001. Comment: 1.5 m
Comment:
Data was submitted and proofread by Vera Barbara Bender, MARUM - Center for Marine Environmental Sciences (University Bremen) on behalf of ECORD Science Operator Data Management (https://www.ecord.org).
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | Event label | Event | ||||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
4 | Penetration depth | Penetr depth | m | Cone penetrometer, Wykeham Farrance, WF 21600 (Fall Cone) | ||
5 | Shear strength | Shear str | kPa | Cone penetrometer, Wykeham Farrance, WF 21600 (Fall Cone) |
License:
Creative Commons Attribution 4.0 International (CC-BY-4.0)
Status:
Curation Level: Enhanced curation (CurationLevelC)
Size:
3 data points
Download Data
Datasets with similar metadata
- Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0092A. https://doi.pangaea.de/10.1594/PANGAEA.975453
- Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0081D. https://doi.pangaea.de/10.1594/PANGAEA.975409
- Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0091C. https://doi.pangaea.de/10.1594/PANGAEA.975451