Gaide, Stefanie; Wintersteller, Paul (2020): Multibeam bathymetry processed data (EM 1002 echosounder entire dataset) of RV MARIA S. MERIAN during cruise MSM32 [dataset]. PANGAEA, https://doi.pangaea.de/10.1594/PANGAEA.919951 (DOI registration in progress)

Bathymetry data was acquired during R/V MARIA S. MERIAN cruise MSM32 in the northeastern Atlantic between 25.09.2013 and 30.10.2013. The cruise aimed to gain a better understanding of the Agadir Canyon. To investigate why some submarine landslides remain as coherent blocks of sediment throughout their passage downslope, while others mix and disintegrate almost immediately after initial failure MSM32 combined seismic, hydroacoustic and sidescan surveys [DOI: 10.2312/cr_msm32]. CI Citation: Paul Wintersteller (seafloor-imaging@marum.de) as responsible party for bathymetry raw data ingest and approval. During the MSM32 cruise, the moonpooled KONGSBERG EM1002 multibeam echosounder (MBES) was utilized to perform bathymetric mapping in shallow depths. 111 beams are formed for each ping while the seafloor is detected using amplitude and phase information for each beam sounding. For further information on the system, consult https://www.km.kongsberg.com/. During the cruise, the swath width was adjusted manually to get the best compromise between coverage and data quality with changing water depth and sea state [DOI: 10.2312/cr_msm32]. Responsible person during this cruise / PI: P. Feldens. Postprocessing and products were conducted by the Seafloor-Imaging & Mapping group of MARUM/FB5, responsible person Paul Wintersteller (seafloor-imaging@marum.de). The open source software MB-System (Caress, D. W., and D. N. Chayes, MB-System: Mapping the Seafloor, https://www.mbari.org/products/research-software/mb-system, 2017) was utilized for this purpose. A sound velocity correction profile was applied to the MSM32 data; there were no further corrections for roll, pitch and heave applied during postprocessing. A tide correction was applied, based on the Oregon State University (OSU) tidal prediction software (OTPS) that is retrievable through MB-System. CTD measurements during the cruise were sufficient to represent the changes in the sound velocity throughout the study area. Using Mbeditviz, artefacts were cleaned manually. NetCDF (GMT) grids of the edited data as well as statistics were created with mbgrid. The published bathymetric EM1002 grid of the cruise MSM32 has a resolution of 35 m. No total propagated uncertainty (TPU) has been calculated to gather vertical or horizontal accuracy. A higher resolution is, at least partly, achievable. The grid extended with _num represents a raster dataset with the statistical number of beams/depths taken into account to create the depth of the cell. The extended _sd -grid contains the standard deviation for each cell. The DTMs projections are given in Geographic coordinate system Lat/Lon; Geodetic Datum: WGS84.

These data should not be used for navigational purposes.

Dataset was submitted to PANGAEA and initial created in 2020. Data publication was approved in 2024.