Michael, K; Golab, A; Shulakova, V; Ennis-King, J; Allinson, G; Sharma, S; Aiken, T (2015): Table 2 & Appendix A. Properties of operations injecting CO2 into saline aquifers [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.855518, Supplement to: Michael, K et al. (2010): Geological storage of CO2 in saline aquifers—A review of the experience from existing storage operations. International Journal of Greenhouse Gas Control, 4(4), 659-667, https://doi.org/10.1016/j.ijggc.2009.12.011
Always quote citation above when using data! You can download the citation in several formats below.
Abstract:
The experience from CO2 injection at pilot projects (Frio, Ketzin, Nagaoka, US Regional Partnerships) and existing commercial operations (Sleipner, Snøhvit, In Salah, acid-gas injection) demonstrates that CO2 geological storage in saline aquifers is technologically feasible. Monitoring and verification technologies have been tested and demonstrated to detect and track the CO2 plume in different subsurface geological environments. By the end of 2008, approximately 20 Mt of CO2 had been successfully injected into saline aquifers by existing operations. Currently, the highest injection rate and total storage volume for a single storage operation are approximately 1 Mt CO2/year and 25 Mt, respectively. If carbon capture and storage (CCS) is to be an effective option for decreasing greenhouse gas emissions, commercial-scale storage operations will require orders of magnitude larger storage capacity than accessed by the existing sites. As a result, new demonstration projects will need to develop and test injection strategies that consider multiple injection wells and the optimisation of the usage of storage space. To accelerate large-scale CCS deployment, demonstration projects should be selected that can be readily employed for commercial use; i.e. projects that fully integrate the capture, transport and storage processes at an industrial emissions source.
Project(s):
Funding:
Seventh Framework Programme (FP7), grant/award no. 265847: Sub-seabed CO2 Storage: Impact on Marine Ecosystems
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Project | Project | Michael, K | |||
| 2 | Location | Location | Michael, K | |||
| 3 | Scale | Scale | Michael, K | |||
| 4 | Status | Status | Michael, K | |||
| 5 | Date/time start | Date/time start | Michael, K | of injection | ||
| 6 | Date/time end | Date/time end | Michael, K | of injection | ||
| 7 | Rate | Rate | t/day | Michael, K | of injection | |
| 8 | Mass | Mass | t | Michael, K | of total storage | |
| 9 | Unit | Unit | Michael, K | of aquifer | ||
| 10 | Lithology/composition/facies | Lithology | Michael, K | |||
| 11 | Porosity | Poros | % vol | Michael, K | ||
| 12 | Permeability, gas | Permeab gas | mD | Michael, K | ||
| 13 | DEPTH, sediment/rock | Depth sed | m | Michael, K | Geocode | |
| 14 | Thickness | Thick | m | Michael, K | ||
| 15 | Particle concentration | Part conc | mg/l | Michael, K | Salinity | |
| 16 | Lithology/composition/facies | Lithology | Michael, K | of seal | ||
| 17 | Thickness | Thick | m | Michael, K | ||
| 18 | Temperature, water | Temp | °C | Michael, K | ||
| 19 | Pressure, load | PL | kPa | Michael, K |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
254 data points