Citation:

2014AoG68A189

Always quote citation above when using data! You can download the citation in several formats below.

RIS Citation BibTeX Citation Text Citation Facebook TwitterShow Map Google Earth

Abstract:

We report on the EPICA Dronning Maud Land (East Antarctica) deep drilling operation. Starting with the scientific questions that led to the outline of the EPICA project, we introduce the setting of sister drillings at NorthGRIP and EPICA Dome C within the European ice-coring community. The progress of the drilling operation is described within the context of three parallel, deep-drilling operations, the problems that occurred and the solutions we developed. Modified procedures are described, such as the monitoring of penetration rate via cable weight rather than motor torque, and modifications to the system (e.g. closing the openings at the lower end of the outer barrel to reduce the risk of immersing the drill in highly concentrated chip suspension). Parameters of the drilling (e.g. core-break force, cutter pitch, chips balance, liquid level, core production rate and piece number) are discussed. We also review the operational mode, particularly in the context of achieved core length and piece length, which have to be optimized for drilling efficiency and core quality respectively. We conclude with recommendations addressing the design of the chip-collection openings and strictly limiting the cable-load drop with respect to the load at the start of the run.

Further details:

Talalay, Pavel G (2014): Drill heads of the deep ice electromechanical drills. Cold Regions Science and Technology, 97, 41-56, https://doi.org/10.1016/j.coldregions.2013.09.009

Project(s):

European Project for Ice Coring in Antarctica (EPICA)

Funding:

Fifth Framework Programme (FP5), grant/award no. EVK2-CT-2000-00077 : European Project for Ice Coring in Antarctica

Fourth Framework Programme (FP4), grant/award no. ENV4980702 : European Project for Ice Coring in Antarctica

Coverage:

Latitude: -75.002500 * Longitude: 0.068400

Date/Time Start: 2001-01-10T00:00:00 * Date/Time End: 2006-01-17T00:00:00

Minimum DEPTH, ice/snow: 91.54 m * Maximum DEPTH, ice/snow: 2761.77 m

Event(s):

EDML (EPICA Dronning Maud Land, DML28C01_00) * Latitude: -75.002500 * Longitude: 0.068400 * Date/Time Start: 2001-01-10T00:00:00 * Date/Time End: 2006-01-17T00:00:00 * Elevation: 2891.7 m * Recovery: 2774.15 m * Campaign: * Basis: Kohnen Station * Method/Device: EPICA drill (EDRILL) * Comment: Elevation is given with reference to WGS84

Comment:

DEPTH, ice/snow [m] = Drilled depth, measured cable length. For offset to core depth refer to reference.

Parameter(s):

#	Name	Short Name	Unit	Principal Investigator	Comment
1	Run	Run		Wilhelms, Frank	The run number, without prefix drilling run, "FR": filter run, "RR": reaming run, "START": start of season, "END": end of season
2	Run Date/Time	Run Date/Time		Wilhelms, Frank	Date/Time when run was started (GMT)
3	Core length	Core length	cm	Wilhelms, Frank	Total length of fitted core pieces immediately after core retrieval
4	Number	n	#	Wilhelms, Frank	Number of core pieces counted immediately after core retrieval
5	Break strength	Break str	daN	Wilhelms, Frank	Force needed to break the core as recorded with a load cell in the top tower wheel
6	Mass	Mass	kg	Wilhelms, Frank	Weight of the spin extractor dried chips. See reference for the residual liquid content.
7	DEPTH, ice/snow	Depth ice/snow	m		Geocode
8	Comment	Comment		Wilhelms, Frank	Special remarks on the run
9	Comment	Comment		Wilhelms, Frank	Special remarks related to the electronics
10	Comment	Comment		Wilhelms, Frank	Special remarks related to the pump
11	Pitch, lower limit	Pitch low	mm	Wilhelms, Frank	Minimal distance between 3 grooves on the core surface (P.G. Talalay, 2014)
12	Pitch, upper limit	Pitch up	mm	Wilhelms, Frank	Maximal distance between 3 grooves on the core surface (P.G. Talalay, 2014)
13	Level	Level	m	Wilhelms, Frank	Drilled depth when the top of the drilling liquid column is reached. See reference for details.
14	Volume	Vol	m³	Wilhelms, Frank	The volume of the drilling liquid pumped into the hole measured with a flow meter
15	Density, mass density	Density	kg/m³	Wilhelms, Frank	The density of the drilling liquid pumped to the hole simultaneosly measured with an aerometer and an alcohol thermometer
16	Temperature, technical	T tech	°C	Wilhelms, Frank	The temperature of the drilling liquid pumped to the hole simultaneosly measured with an aerometer and an alcohol thermometer

License:

Creative Commons Attribution-NonCommercial 3.0 Unported (CC-BY-NC-3.0)

Size:

14880 data points

Data

Download dataset as tab-delimited text — use the following character encoding:

1 Run (The run number, without prefi...)	2 Run Date/Time (Date/Time when run was starte...)	3 Core length [cm] (Total length of fitted core p...)	4 n [#] (Number of core pieces counted...)	5 Break str [daN] (Force needed to break the cor...)	6 Mass [kg] (Weight of the spin extractor ...)	7 Depth ice/snow [m]	8 Comment (Special remarks on the run)	9 Comment (Special remarks related to th...)	10 Comment (Special remarks related to th...)	11 Pitch low [mm] (Minimal distance between 3 gr...)	12 Pitch up [mm] (Maximal distance between 3 gr...)	13 Level [m] (Drilled depth when the top of...)	14 Vol [m³] (The volume of the drilling li...)	15 Density [kg/m³] (The density of the drilling l...)	16 T tech [°C] (The temperature of the drilli...)
1	2002-01-25T10:02					91.54	several bangs with 50 to 70 cm/s before drilling gets started						0.224	918.0	-26.5
2	2002-01-25T11:55					94.33
3	2002-01-25T12:36					96.06			pump deformed, upper wave filed and brass glide bearings replaced
4	2002-01-25T16:20					96.86
5	2002-01-25T18:13					97.23			clogged chips in the pump's springs
6	2002-01-25T18:45					97.74
7	2002-01-25T20:08					98.79			slight damage on glide bearings
8	2002-01-25T20:55					99.41
9	2002-01-25T21:27					100.34
10	2002-01-25T22:05					100.95
11	2002-01-25T22:27	21.7	2			101.03	bang with 30 to 50 cm/s, antitorque rotation
12	2002-01-26T10:05	81.0	3	137	13.00	101.83
13	2002-01-26T10:40	97.0	2	202		102.78
14	2002-01-26T11:32	65.0	1	287		103.68
15	2002-01-26T12:20	83.0	1	271	26.50	104.47				0.000	3.500
16	2002-01-26T15:28	113.0	1	292		105.82				4.000	4.200		0.200	920.0	-26.0
17	2002-01-26T16:20	128.0	2	133	16.00	106.78	change to long drill, offset in depth scale 4.26 m, corrected for previous runs
18	2002-01-26T17:28	265.0	1	197	18.00	109.84				4.700	4.700
19	2002-01-26T18:30	355.0	1	199	18.50	113.23
20	2002-01-27T15:04					113.28	drill blocked at 8.5A, still blocked on surface					92.0
21	2002-01-27T15:40	321.0	1	248	20.50	116.52				4.000	4.000
22	2002-01-27T16:40	335.0	1	262		119.83							0.160	920.0	-26.0
23	2002-01-27T17:39			291		119.83	antitorque rotation
23	2002-01-27T17:39	37.0	2	134	26.00	120.26	antitorque rotation
24	2002-01-27T18:35	344.0	1	308	19.00	123.68	mounted new AT blades, clearance 32 mm above hammer
25	2002-01-27T20:17					123.75		no power to motor
26	2002-01-28T11:20	324.0	1	359	19.00	127.06		electronics reassembled
27	2002-01-28T12:20			251		127.60	antitorque rotation
27	2002-01-28T12:20	60.0	2	201		127.60	antitorque rotation
FR1	2002-01-28T13:57				5.50	127.60						107.0
28	2002-01-28T14:35	345.0	1	247	23.00	131.00			replaced two weak sprongs of flap valve
29	2002-01-28T15:38	330.0	3	161	18.00	134.29	liquid sample from hole: 920 kg/m**3 at -37.5°C, drill head with 3 closed windows and 3 core catchers			3.100	3.100		0.250	920.0	-30.0
30	2002-01-28T18:45	325.0	1	216	19.00	137.55	shoes adjusted to 29/100 mm			3.000	4.000
31	2002-01-28T21:32	349.0	1	216	17.50	141.08	shims for 5/100 mm removed			4.800	4.800
32	2002-01-28T22:25	352.0	1	164	19.00	144.65	antitorque rotation, but restart possible, liquid sample from hole 920 kg/m**3 at -37.9°C			4.800	4.800
33	2002-01-29T08:48			203		144.65	antitorque rotation					111.0
33	2002-01-29T08:48	267.0	2	182	19.00	147.07	antitorque rotation
FR2	2002-01-29T09:50				6.00	147.07	very fine slush
34	2002-01-29T10:25	343.0	1	191	17.00	150.61				4.100	4.300
35	2002-01-29T11:35			109		151.04	changed to core barrel with closed windows, 35/100 mm clearance under shoes			3.450	3.450
35	2002-01-29T11:35	109.0	2	345	8.00	151.76	internal fracture in lower core, due to core catchers not disengaging with closed windows			3.450	3.450
36	2002-01-29T12:45	349.0	1	201	18.00	155.21	switched back to core barrel with open windows, 2.5/100 mm shims removed, AT sharpened and tuned to 34 mm			4.200	4.600	121.0
37	2002-01-29T13:45	336.0	1	217	18.00	157.96				4.800	4.800	106.0	0.335	924.0	-33.5
38	2002-01-29T14:45	339.0	1	224		162.01	some fine slush from wall on the screws from pump sleeve			4.400	4.800	110.0
39	2002-01-29T15:45			187		162.71	changed core barrel to one with windows open, shims for 7/100 mm removed			4.200	4.200	114.0
39	2002-01-29T15:45	116.0	2	186	9.00	163.18	liquid sample from hole 922 kg/m**3 at -38.8°C			4.200	4.200	117.0
40	2002-01-29T16:35	161.0	1	184	12.00	164.79		terminated due to motor no power, working after heating to +30°C		4.600	4.600
41	2002-01-29T18:45	347.0	1	245	17.00	168.36				4.400	4.500	118.0
42	2002-01-29T19:54	351.0	1	175	18.50	171.84				4.400	4.400	126.0
43	2002-01-29T20:50	326.0	1	304	18.50	175.14				4.400	4.800	126.0
44	2002-01-29T21:50	334.0	1	235	19.50	178.92				4.400	4.500	135.0
FR3	2002-01-29T23:02				7.00	178.92	a lot of fine slush, most likely from the column					135.0
45	2002-01-30T08:56	329.0	1	215	16.00	182.02				4.400	5.000
46	2002-01-30T09:47			165		182.10	antitorque rotation			4.800	4.800	106.0	0.550	922.0	-31.6
46	2002-01-30T09:47	302.0	2	350	19.50	184.00			pump disengaged	4.800	4.800
47	2002-01-30T11:35	329.0	1	336	18.00	188.12				4.600	4.700	108.0
48	2002-01-30T12:40	346.0	1	282	18.00	191.51				4.500	4.700	108.0
49	2002-01-30T13:45			279		192.11	antitorque rotation			4.200	4.200	116.0
49	2002-01-30T13:45	99.0	3	279	8.00	192.36	antitorque rotation	computer went crazy		4.200	4.200
50	2002-01-30T14:26	337.0	1	222	9.00	195.84				4.600	4.800	119.0
FR4	2002-01-30T15:17				9.80	195.84
FR5	2002-01-30T15:45				3.50	195.84						119.0
51	2002-01-30T16:10	231.0	1	287	5.50	198.18	antitorque rotation			4.700	4.800	120.0
52	2002-01-30T17:10	142.0	1	280	8.50	199.62	clearance of shoes measured to 36/100 mm, put 1 shim 2.5/100 mm under shoes	changed to 19'' 486 rack computer		3.500	4.800	128.0
53	2002-01-30T21:00	123.0	1	220	11.00	200.87	antitorque rotation	speed counter is disturbed, plug all electronics to one phase	switch to shaft with pump without lubrication holes	4.200	4.200	125.0
FR6	2002-01-30T21:45				6.00	200.87	removed one shim, should be approx. 36/100 mm					128.0
54	2002-01-30T22:25	59.0	1	165		201.54		Terminated due to upper pressure 1.15 ERR ON		4.400	4.400
55	2002-01-31T15:21	67.0	1	285	6.00	202.06		disassembled electronics, much liquid in upper space, inner tube dry		4.700	4.700		0.450	921.0	-29.7
56	2002-02-01T11:59	163.0	1	510	9.00	203.56		redone solderings on 300 V modules, motor turns when powered on without bits set		4.400	4.400	105.0
57	2002-02-01T13:02	261.0	1	340	12.00	205.90				4.300	4.400	108.0
58	2002-02-01T14:30	306.0	1	397	17.00	209.39	replaced spacer in lower spring, liquid sample from hole 925 kg/m**3 at -40°C	electric depth counter disturbed		4.200	4.700	108.0
59	2002-02-01T15:37	351.0	1	381	16.50	212.83				4.300	4.400	115.0
60	2002-02-01T16:32	331.0	1	315	20.50	216.17				4.200	4.300	118.0
61	2002-02-01T17:48	324.0	1	569	21.00	219.41				4.000	4.000	125.0
62	2002-02-01T19:40	328.0	1	306		222.70				3.200	3.400	131.0
63	2002-02-01T20:50	304.0	1	394	18.00	225.79	removed one shim 2.5/100 mm			4.500	4.600	132.0
FR7	2002-02-01T22:00				4.00	225.79	drill head tuned to 38-39/100 mm					110.0	0.330	924.7	-33.5
64	2002-02-02T10:36	326.0	1	435	16.50	228.97				4.900	5.200	116.0
65	2002-02-02T11:47	317.0	1	364	18.50	232.24				4.900	5.300	117.0
66	2002-02-02T13:02			290		232.65	no rotation at 9 A, still blocked after core break		pump very difficult to turn	5.000	5.000	121.0
66	2002-02-02T13:02	125.0	2	391	8.50	233.49
67	2002-02-02T13:59	219.0	3	346	11.00	235.69	bad penetration		icing in pump	3.500	3.900	130.0
68	2002-02-02T15:01	327.0	1	412		238.98	turned AT blades to new sharp side, removed one core catcher			4.600	4.800	134.0
69	2002-02-02T16:30	15.0	1	360	17.00	239.05	several antitorque rotations			5.200	5.200	138.0
70	2002-02-02T17:12	322.0	1	304	16.50	242.26	put in one shim 2.5/100 mm			4.600	4.600	135.0
71	2002-02-02T18:23	331.0	1	434	15.00	245.60				4.800	4.900	127.0	0.375	924.0	-34.5
FR8	2002-02-03T14:03				8.50	245.60						120.0
72	2002-02-03T14:37	302.0	1	569	17.00	248.51	antitorque rotations			4.300	4.400	120.0
73	2002-02-03T15:47	61.0	1	594	5.00	249.23	adjusted AT springs to 31.5 mm above hammer			4.200	4.200	122.0
74	2002-02-03T16:37	114.0	1	420	7.00	250.31	antitorque rotation			4.200	4.300	126.0
75	2002-02-03T17:27	336.0	1	543	17.00	253.71				4.200	4.200	134.0
76	2002-02-03T18:36	75.0	1	654	3.00	254.48				4.300	4.300	138.0
77	2002-02-03T19:46	335.0	1	582	15.00	257.82	one shim removed 2.5-3/100 mm			3.700	3.800	141.0
78	2002-02-03T20:58	10.0	1	448		257.87						109.0	0.450	922.0	-30.5
79	2002-02-03T21:35	314.0	1	382	16.50	261.05	several antitorque rotations		flap valves partly open due to hard chips in them	3.300	3.300	117.0
80	2002-02-03T22:55	12.0	1	627	3.00	261.16						103.0	0.310	925.0	-34.0
FR9	2002-02-03T23:50					261.16
FR10	2002-02-03T23:50				10.50	261.16
FR11	2002-02-03T23:50				2.50	261.16
81	2002-02-04T08:10	337.0	1	532	18.00	264.24				4.000	4.300	112.0
82	2002-02-04T09:25			565		264.92	antitorque rotation					106.0
82	2002-02-04T09:25	154.0	4	727	10.00	266.11				3.400	3.700
83	2002-02-04T10:46	227.0	1	590	11.00	268.36				3.700	3.900	107.0
84	2002-02-04T11:47	64.0	1	636		269.01			no chips in chip chamber	4.200	4.200	114.0
FR12	2002-02-04T12:47				5.00	269.01
85	2002-02-04T13:25	343.0	2	475	16.00	272.38				3.600	3.700	118.0
86	2002-02-04T15:00	253.0	1	568	14.00	275.01	antitorque rotation			3.600	3.800	124.0
87	2002-02-04T17:40	18.0	1	649		275.04		changed to 300 V modules with replaced BC107				125.0
88	2002-02-04T20:05	322.0	1	617	16.00	278.54				3.600	3.700	130.0
89	2002-02-04T21:20	264.0	1	773	12.00	281.19				4.700	4.900
FR13	2002-02-04T22:27				10.00	281.19						136.0
90	2002-02-04T23:25	320.5	1	520	14.00	284.36	antitorque rotation			4.800	5.000	113.0	0.360	926.0	-35.5
91	2002-02-05T08:21	12.0	1	381	5.00	284.50						114.0
92	2002-02-05T09:18	323.0	1	678	13.00	287.66				4.300	4.700	118.0
93	2002-02-05T10:19	330.0	1	692	15.00	290.90				4.900	5.000	123.0
94	2002-02-05T11:24	320.0	1	1001	19.00	294.23				4.700	5.200	130.0
95	2002-02-05T12:34	39.0	1	307	4.00	294.54						134.0
96	2002-02-05T13:32	314.0	1	571	14.50	297.64	reduced clearance under shoes by 2.5-3/100 mm, should now be 33-34/100 mm			4.700	4.800	136.0
FR14	2002-02-05T14:46				9.50	297.64						142.0
FR15	2002-02-05T15:34				5.00	297.64
97	2002-02-05T16:22	327.0	1	382	16.00	301.03				5.200	5.200		0.500	924.0	-32.5
98	2002-02-05T19:08	82.0	1	458	4.00	301.74		changed rotation speed in 375 electronics module		4.800	5.200	110.0
99	2002-02-05T20:10	266.0	1	665	17.00	304.43	introduced 2.5/100 mm shims under shoes, should now be 31-30/100 mm			4.200	4.500	113.0
100	2002-02-05T21:35	250.0	1	557	14.50	306.91	introduced 2.5/100 mm shims under shoes, should now be 27-28/100 mm			3.700	3.900	118.0
101	2002-02-05T23:00			398		307.08	removed one shim 2.5/100 mm, should now be 30-34/100 mm clearance					122.0
101	2002-02-05T23:00	138.0	2	661	9.50	308.23
FR16	2002-02-06T00:19				3.50	308.23						123.0
102	2002-02-06T08:23	343.0	1	711	20.00	311.67	drill head tuned to 27-28/100 mm clearance			3.900	4.200	102.0	0.360	925.0	-33.6
103	2002-02-06T09:49	341.0	1	501	20.00	315.14				4.000	4.200	105.0
104	2002-02-06T11:22	345.0	1	555	19.50	318.49				3.300	3.400	108.0
105	2002-02-06T12:59	318.0	1	563	19.00	321.69				3.700	3.800	113.0
106	2002-02-06T14:35			575		322.46						122.0
106	2002-02-06T14:35	349.0	2	546	20.00	325.18				3.600	3.800
107	2002-02-06T16:03	342.0	1	546	19.00	328.57				3.800	4.000	126.0
108	2002-02-06T17:37	343.0	1	573	18.00	331.99				3.800	4.000	127.0
109	2002-02-06T18:57	338.0	1	433	20.00	335.49				3.800	4.100	133.0
110	2002-02-06T20:49	345.0	1	465	20.00	338.98				3.900	4.100	138.0
111	2002-02-06T22:45	346.0	1	433	20.00	342.36				4.000	4.100	141.0
112	2002-02-07T08:20	330.0	1	607	20.50	345.69				4.000	4.200	118.0	0.390	924.0	-33.5
113	2002-02-07T09:53	343.0	1	349	21.00	349.07				3.900	4.600	125.0
114	2002-02-07T11:44	324.0	1	764	20.00	352.36				4.000	4.200	126.0
115	2002-02-07T13:26	329.0	1	539	19.00	355.70	antitorque rotation			3.800	4.000	131.0
116	2002-02-07T15:12	330.0	1	426	19.50	358.94	antitorque rotation			4.100	4.300	137.0
117	2002-02-07T17:14	325.0	1	661	20.00	362.21				4.300	4.400	140.0
118	2002-02-07T18:43	331.0	1	669	18.50	365.48				4.000	4.100	105.0	0.450	925.0	-34.0
119	2002-02-07T20:04			317		366.31	antitorque rotation			4.000	4.200	111.0
119	2002-02-07T20:04	339.0	3	341	19.00	368.86						111.0
120	2002-02-07T21:26	330.0	3	448	19.50	372.14				3.900	4.100	120.0
121	2002-02-07T23:36	317.0	2	558	19.50	375.30						126.0
122	2002-02-08T08:28	331.0	1	571	20.00	378.50				3.500	3.700	130.0
123	2002-02-08T09:48	333.0	2	575	19.50	381.87				3.700	3.900	135.0
124	2002-02-08T11:42	206.0	1	1249	11.50	384.01				3.500	3.900	99.0	0.500	924.0	-32.5
FR17	2002-02-08T13:10					384.01						101.0
FR18	2002-02-08T13:54				5.50	384.01						102.0
125	2002-02-08T14:55			250		384.01	penetration problems	electronics works after power down and surface program restart				105.0
125	2002-02-08T14:55	244.0	2	499	15.50	386.36						105.0
126	2002-02-08T16:30	323.0	1	347	17.50	389.62				3.700	3.800	108.0
127	2002-02-08T18:13	332.0	1	672	19.50	392.89				3.800	4.000	113.0
128	2002-02-08T19:40			832		393.09	removed one shim under shoes, should be 30-32/100 mm					118.0
128	2002-02-08T19:40	78.0	1	362	8.00	393.58						118.0
129	2002-02-08T20:50	258.0	1	478	15.00	396.19				3.800	4.600	121.0
130	2002-02-08T22:10	320.0	6	483	16.50	399.52				4.200	4.200	124.0
131	2002-02-08T23:30	226.0	2	553	13.50	401.72				3.900	4.200	101.0	0.450	920.0	-28.5
FR19	2002-02-09T08:15					401.72						100.0
132	2002-02-09T09:21	278.0	1	425	17.50	404.51				4.300	4.400	104.0
133	2002-02-09T10:35	144.0	2	416	4.50	405.80				4.200	4.200	108.0
134	2002-02-09T11:46	94.0	1	418		406.85				4.100	4.100	112.0
135	2002-02-09T12:45	328.0	1	258	24.00	410.17			pump blocked by piece of ice	4.000	4.200	115.0
136	2002-02-09T13:52	327.0	3	399	21.00	413.38				4.100	4.400	119.0
137	2002-02-09T15:10	327.0	2	283	21.00	416.69				3.700	4.200	124.0
138	2002-02-09T16:37			900		418.86	drill not free when pulled up 3 m			4.100	4.100	128.0
138	2002-02-09T16:37			900		418.86	second pull about 3 m up, came free at 8 A rotation
138	2002-02-09T16:37	215.0	1	479	15.00	418.86
139	2002-02-09T17:46				5.00	418.92	reaming run to clean wall					134.0
FR20	2002-02-10T10:15					418.92						135.0
140	2002-02-10T11:25	225.0	1	447	8.50	421.06	drill head measured to 29-32/100 mm, tuned to 30/100 mm clearance		pump didn't work properly	3.900	4.100	135.0
141	2002-02-10T12:35					421.06	changed to drillhead with closed windows, Rufli cutters with 30/100 mm clearance under shoes, no way to penetrate, several reaming attempts. core barrel gone!					117.0	0.250	925.0	-34.0
142	2002-02-10T14:55					421.06	unsuccessful fishing run with full drill
143	2002-02-10T15:45			182		421.06	core barrel recovered in fishing run with HT shaft and without outer core barrel. spirals badly damaged, pcs left down hole
FR21	2002-02-10T18:35				3.00	421.06						119.0
144	2002-02-10T20:18	4.0	4			421.05	11cm long spiral piece brought up					120.0
145	2002-02-10T21:30			221		421.05						121.0
145	2002-02-10T21:30			265		421.05	fished another half of aluminum spiral
146	2002-02-10T22:30			332		421.05	several hard bangs, no way to start run					122.0
147	2002-02-10T23:32	52.0	1	435		422.06	changed to Viking knives, 32/100 mm clearance					120.0
FR22	2002-02-11T08:30					422.06						122.0
148	2002-02-11T10:06	326.0	1	554	24.00	424.86				4.100	4.300	124.0
149	2002-02-11T11:45	274.0	1	550	12.50	427.72						128.0
150	2002-02-11T13:28	310.0	3	294	18.00	430.81				4.000	4.200	134.0
151	2002-02-11T15:19	74.0	1	458		431.52				4.000	4.200	140.0
152	2002-02-11T17:05	97.0	1	754	8.00	432.68				3.300	3.300	140.0
153	2002-02-11T19:18	78.0	1	535	8.50	433.23						120.0	0.200	922.0	-31.0
154	2002-02-11T20:50	119.0	1	448	7.00	434.42	several antitorque rotations
155	2002-02-11T22:00	69.0	1	587		435.20				3.900	4.000	117.0	0.120	920.0	-27.7
FR23	2002-02-11T23:06				2.50	435.20						120.0
156	2002-02-12T09:09	33.0	1	242		435.48	1 screw head brought up with chips					118.0
157	2002-02-12T10:45	333.0	1	502	24.00	438.80	cutters sharpened			4.600	4.600	121.0
END	2002-02-12T16:00					438.80						55.0	1.500	920.0	-29.0
START	2002-12-21T15:46					438.27	use long drill with windows on lower end closed by welding	put on 50 V motor with 80:1 gear				81.5
FR24	2002-12-21T21:19					438.27	created little kinck in cable about 6 m on top of drill, new termination with pull test to 17430 N					82.0
158	2002-12-21T20:38				5.00	438.27		disturbed pressure sensors				90.0
159	2002-12-25T16:37	47.0	2	612		438.60	put on head new Rufli No. 4 head with 0.26 mm clearance to front and 0.7 mm to tail of shoe, stopped due to persistent antitorque rotation, use cutters with outer side cutting edge all to the top	put on 60 V motor with 80:1 gear		3.800	4.000
160	2002-12-26T09:20	36.0	1	138	6.00	439.30	stopped due to persistent antitorque rotation even at slow rotation speed, picked up two pieces from brass screw, cutter damaged			4.200	4.200
161	2002-12-26T11:05	45.0	2	247	2.50	439.63	tuned antitorque from 33 mm to 34 mm above hammer, still persistent antitorque rotation			4.300	4.300
162	2002-12-26T16:00	49.0	1	311	2.00	440.30	changed to HT drill with same head and plastic flights, stopped due to antitorque rotation			4.600	4.600
163	2002-12-26T17:00			122		440.42	adjusted antitorque to 31 mm above hammer, no way to penetrate
164	2002-12-26T18:10					440.42	adjusted antitorque to 36 mm above hammer	high pressure seal stat leakage
165	2002-12-26T20:30	55.0	1	260		440.87	stopped due to antitorque rotation			4.400	4.400
166	2002-12-26T21:37					440.87		termination of run because of pressure in stat seal fast rising
167	2002-12-27T09:40	38.5	1	396	3.50	441.11	stopped due to antitorque rotation problems	had pressure section drying over night and mounted it warm in the morning		4.200	4.200
168	2002-12-27T10:35					441.11		termination of run because of pressure in stat seal fast rising
169	2002-12-27T11:52					441.11		heated lower end of pressure tube till it was hand warm, termination of run due to non tight seal
170	2002-12-27T17:03					441.19		mounted section with 60 V motor and 50:1 gear, not enough torque to drill
171	2002-12-27T22:18	83.0	1	206		442.00		mounted section with 60 V motor and 80:1 gear	ice pieces in pump			92.0
172	2002-12-28T09:03	110.0	1	450	10.00	443.00				4.400	4.500	92.0
173	2002-12-28T10:36	67.0	1	316		443.80	drill blocked for unidentified reason, 8 cm of chips on top of core			4.200	4.200	93.0
174	2002-12-28T12:03	102.0	1	330		444.92	16 cm of chips on top of core			4.400	4.400	93.0
175	2002-12-28T13:45	60.0	1	397	6.00	445.49	stopped dur to persistent antitorque rotation			4.100	4.300	94.0
176	2002-12-28T14:50	88.0	1	354		446.39	antitorque rotation at 9 A			4.500	4.500	96.0
177	2002-12-28T16:22	11.0	1	340	11.00	446.20	switched to long drill with same drill head, persistent antitorque rotation					97.0
178	2002-12-29T13:38	8.5	1	160		446.40	sharpened antitorque and adjusted to 33 mm above hammer, changed to Rufli head 0 with 0.22 mm clearance to front and 0.62 mm clearance to tail of shoe					98.0
179	2002-12-29T15:00	10.5	1	198		446.45	tuned antitorque to 37 mm above hammer, stop due to blocked drill at 8 A					99.0
180	2002-12-29T16:20	22.0	1	174		446.68	put on Rufli head 4 with nominal pitch of 4.5 mm, stop due to antitorque rotation					99.5
181	2002-12-29T17:50			195		446.70	too high idle current, pull up slowly to preserve packing on drill head, on surface two channels blocked					101.0
182	2002-12-29T19:43	55.0	1	325		447.35	changed to HT drill with pump and Al-flights with same drillhead		chip chamber full	4.500	4.600	97.0
183	2002-12-29T22:08	122.0	1	442	15.00	448.63						94.0
184	2002-12-30T09:00	90.0	1	250		449.45	blocked at 8 A, antitorque rotation at 9 A					94.0
185	2002-12-30T10:25	86.5	1	487		450.35	valve open, chip chamber only 2/10 filled					94.0
186	2002-12-30T11:53	46.0	1	678		450.87	changed screws of valve, stopped due to no rotation at 10.2 A			4.800	4.800	94.0
187	2002-12-30T13:22	125.0	1	377	17.00	452.09	put on Rufli head from last year with 0.21 mm clearance to front and 0.62 mm clearance to tail of shoe			3.800	3.900
188	2002-12-30T14:35	127.0	1	343		453.35				3.800	3.800	94.0
189	2002-12-30T16:18	37.0	1	250	11.00	453.50	changed to long drill with same drill head, pulled up for security because of fast dropping load			3.800	3.800	98.0
190	2002-12-30T17:46	35.0	1	202		453.99	not cutting at too much load drop			3.300	3.300	98.0
191	2002-12-30T20:05	78.0	1	256	6.00	454.85	put in three spacer rings between pump and superbanger, drill head has now about 18 mm clearance to lower end of outer barrel			3.300	3.300		0.402	916.0	-24.0
192	2002-12-31T09:00		2	350		454.85
192	2002-12-31T09:00	74.0	2	324		455.33	stopped due to high idle current			2.600	2.800
193	2002-12-31T12:38	90.0	1	548		456.51				3.000	3.100	112.0
194	2002-12-31T14:23			443		457.56
194	2002-12-31T14:23	207.0	3	491	19.50	458.55	stopped for security after 2 m			3.000	3.000	106.0
195	2002-12-31T16:15			496		459.62	break core for security
195	2002-12-31T16:15	183.0	2	529	10.00	460.38	run stopped due to rising current			2.900	2.950	105.0
196	2003-01-01T12:30	53.0	1	359	7.00	460.89	antitorque adjusted to 34 mm, stopped due to antitorque rotation			2.950	2.950
197	2003-01-01T14:05	36.0	1	303		461.22	changed to groove bended Gerasimoff antitorque blades, clearance about 25 mm over hammer, stopped due to antitorque rotation at 6 A			2.950	2.950	126.0
198	2003-01-01T15:10	103.0	1	331	8.00	462.21	termination to check drill head			2.700	2.940
199	2003-01-01T16:56	210.0	1	228	12.00	464.39				3.600	3.600	125.0
200	2003-01-01T18:14	202.0	1	446	11.00	466.47				2.600	3.500	128.0
201	2003-01-01T20:20	220.0	1	376	13.00	468.72				3.450	3.650
202	2003-01-02T09:40	46.0	1	322	2.50	469.08	cutters sharpened, clearance 0.22 mm for all cutters to front end of shoe, terminated due to antitorque rotation at 8.8 A			3.450	3.450
203	2003-01-02T10:55	28.0	1	272		468.73	antitorque adjusted to 31 mm clearance, replaced 5 mm by 3 mm spacer to have lock screw clamping on thread all it's way, head-outer barrel clearance now 16 mm, terminated due to antitorque rotation			3.700	3.700
204	2003-01-02T11:51	74.0	1	312		470.17	antitorque adjusted to 32 mm now					144.0
205	2003-01-02T13:04	23.0	1	243		470.29	stopped due to blocked drilled at 10.5 A			3.440	3.440		0.402	917.0	-25.0
206	2003-01-02T14:33			333		470.78	antitorque rotation					120.0
206	2003-01-02T14:33	219.0	2	565	13.00	472.55				3.650	3.650
207	2003-01-02T15:44	57.0	1	286	2.00	473.20		fake reading of upper pressure		3.500	3.500	125.0
208	2003-01-02T16:51			261		473.94	blocked at 10 A, antitorque rotation at 12 A
208	2003-01-02T16:51	261.0	1	375	16.00	475.71	blocked at 12.4 A, no antitorque rotation			3.400	3.600	127.0
209	2003-01-02T18:33			433		476.56	antitorque rotation at 8.8 A
209	2003-01-02T18:33	320.0	2	480	18.50	478.87		fake readings of electronics		3.600	3.600	128.0
210	2003-01-02T20:24			361		480.05	antitorque rotation at 10.5 A
210	2003-01-02T20:24	290.0	2	578	17.50	481.31		more than 25 fake readings		3.500	3.640	135.0
211	2003-01-03T08:58	154.0	1	503	10.00	483.40	power failure in trench	more than 20 fake readings		3.500	3.700	140.0
212	2003-01-03T11:00	320.0	1	227	18.00	485.52		more than 39 fake readings		3.600	3.600	145.0
213	2003-01-03T16:36	61.0	1	461	7.00	487.23	stopped due to high idle current	more than 15 fake readings	replaced hose clamps by wire	3.460	3.460	150.0
214	2003-01-03T18:22	172.0	1	317	9.00	488.82	stopped due to antitorque rotation	more than 21 fake readings		3.500	3.500	155.0	0.432	917.0	-24.5
215	2003-01-04T02:48			418		489.70	flame straightened outer tube	electronics totally cleaned and copper chip removed from circuit board in 375 V section				126.0
215	2003-01-04T02:48	250.0	2	601	18.00	491.40				3.400	3.400
216	2003-01-04T08:51	149.0	1	428	8.50	492.98	drill blocked at 9 A			3.400	3.400	128.0
217	2003-01-04T10:48	204.0	1	301	11.00	494.96				3.400	3.400	133.0
218	2003-01-04T14:21			239		496.10	sharpened cutters, clearance to front of shoe 0.2 mm					139.0
218	2003-01-04T14:21	108.0	2	228	8.00	496.21				2.900	3.050
219	2003-01-04T15:36	186.0	6	200	11.00	498.02	loosened antitorque by 1 mm, stopped due to bad penetration			2.800	2.900	142.0
220	2003-01-04T17:22			162		498.62	antitorque rotations, break and tra again					146.0	0.350	917.0	-26.0
220	2003-01-04T17:22	338.0	2	692	18.50	501.31				3.000	3.500		0.500	911.0	-18.0
221	2003-01-05T11:45			514	6.50	502.38	antitorque rotation					91.0
221	2003-01-05T11:45	304.0	2	158	21.50	504.20				3.250	3.450
222	2003-01-05T13:55	279.0	1	317	17.00	507.16				3.200	3.400	95.0
223	2003-01-05T15:25	244.0	1	164	15.00	509.45	antitorque rotations			3.050	3.500	97.0
224	2003-01-05T17:14	189.0	1	118	17.00	512.59	pulled up rotating			3.300	3.300	99.0
225	2003-01-05T18:53			645		513.82	antitorque rotation			3.250	3.300	104.0
225	2003-01-05T18:53	351.0	3	260	14.00	514.83				3.250	3.300
226	2003-01-05T20:25			484		515.70	antitorque rotation					109.0
226	2003-01-05T20:25	312.0	4	559	18.00	518.03				3.160	3.220
227	2003-01-05T21:40			216		518.05	antitorque rotation					113.0
227	2003-01-05T21:40	290.0	4	376	16.50	520.91				3.110	3.180
228	2003-01-05T22:55			210		522.16	tuned antitorque harder to 31 mm above hammer, bad penetration					119.0
228	2003-01-05T22:55	215.0	2	471	12.00	523.04				3.180	3.380
229	2003-01-06T08:21			471		524.46	tuned antitorque 0.5 to 1 mm softer / 29.5 mm now, bad penetration					121.0
229	2003-01-06T08:21	317.0	2	202	19.00	526.18				3.250	3.450
230	2003-01-06T10:04			194		527.32	bad penetration					126.0
230	2003-01-06T10:04	309.0	2	467	18.00	529.39				3.050	3.450
231	2003-01-06T11:46			595		530.71	bad pentration					132.0
231	2003-01-06T11:46	195.0	2	481	13.00	531.17	bad pentration			3.450	3.450
232	2003-01-06T13:25	288.0	2	471	17.00	534.11				3.240	3.410	136.0
233	2003-01-06T15:08	311.0	1	288	21.00	537.25	tuned antitorque 0.5 mm harder			2.810	3.030	140.0
234	2003-01-06T16:43	284.0	2	523	18.00	540.07				2.900	2.900	145.0	0.442	916.0	-24.5
235	2003-01-06T18:15	273.0	1	118	17.00	542.80				2.950	3.000	118.0
236	2003-01-06T19:43			215		544.93						125.0
236	2003-01-06T19:43	285.0	2	347	20.00	545.62				2.970	3.110
237	2003-01-06T21:00			475		547.23						132.0
237	2003-01-06T21:00	283.0	2	324	17.00	548.42				2.970	3.230
238	2003-01-06T22:09	249.0	6	459	13.50	550.99		few electronics fake readings		2.980	3.010	137.0
239	2003-01-06T23:26	217.0	1	560	12.00	553.18		few electronics fake readings		2.910	3.110	138.0	0.437	917.0	-25.5
240	2003-01-07T08:25	188.0	1	309	10.00	555.14		more than 15 fake readings		2.950	2.950
241	2003-01-07T10:05	233.0	1	650	16.00	557.47		more than 15 fake readings		3.600	3.600	112.0
242	2003-01-07T11:58			299		558.51		more than 9 fake readings				117.0
242	2003-01-07T11:58	309.0	2	425	18.00	560.43				3.600	3.600
243	2003-01-07T14:10	233.0	3	668	16.00	562.72	changed to Danish drill head with 0.21 mm clearance to front of shoe, new Rufli cutters	more than 8 fake readings		3.800	3.800	121.0
244	2003-01-07T15:55	275.0	1	317	15.00	565.55	reduced pitch by one shim under shoes	more than 33 fake readings, disassembled electronics one inclinometer was wet from silicon oil		2.250	2.500	127.0
245	2003-01-08T01:30	265.0	1	260	18.50	568.20		more than 4 fake readings		2.600	2.600
246	2003-01-08T08:15	284.0	3	437	18.50	571.02		more than 1 fake reading		2.400	2.800	136.0
247	2003-01-08T10:00	239.0	2	371	14.00	573.42	changed drill head to Rufli head from last year			3.200	3.300	141.0
248	2003-01-08T11:35	213.0	1	339	14.00	575.54	changed drill head to Danish head and removed one shim			3.300	3.400	146.0	0.470	917.0	-26.0
249	2003-01-08T13:10	216.0	1	501	12.50	577.66	put in one shim			2.780	3.000	115.0
250	2003-01-08T14:20	283.0	1	326	18.50	580.53				2.790	2.960	123.0
251	2003-01-08T15:45			323		582.02	persistent antitorque rotation					125.0
251	2003-01-08T15:45	305.0	3	492	18.00	583.55				2.780	2.780
252	2003-01-08T17:00	230.0	1	389	13.50	585.87				3.100	3.100	128.0
253	2003-01-08T18:36			433		587.03						132.0
253	2003-01-08T18:36	326.0	5	582	19.00	589.00				2.820	2.980
254	2003-01-08T20:10	290.0	4	555	18.00	591.97				2.830	2.840	137.0
255	2003-01-08T21:31			374		593.43						141.0
255	2003-01-08T21:31	308.0	4	679	18.00	595.12				2.840	2.860
256	2003-01-08T22:55			361		596.39						147.0
256	2003-01-08T22:55	312.0	2	803	19.00	598.20				2.810	2.810		0.589	915.0	-21.0
FR25	2003-01-09T00:30				4.50	598.20						115.0
FR26	2003-01-09T01:05					598.20						118.0
257	2003-01-09T08:23			459		599.09						117.0
257	2003-01-09T08:23	318.0	4	329	20.00	601.20				2.800	3.200
258	2003-01-09T10:23			591		602.94						121.0
258	2003-01-09T10:23	310.0	2	587	19.00	604.42				2.850	2.900
259	2003-01-09T12:02	264.0	1	503	17.50	607.05				2.800	2.900	127.0
260	2003-01-09T13:40	292.0	3	409	19.00	610.01				2.680	2.760	132.0
261	2003-01-09T15:06			386		611.75						136.0
261	2003-01-09T15:06			484		612.50
261	2003-01-09T15:06	305.0	6	548	17.50	613.01				2.700	2.770
262	2003-01-09T16:40			415		614.20						141.0
262	2003-01-09T16:40	315.0	4	403	18.50	616.18				2.800	2.900
263	2003-01-09T18:27			463		617.17						150.0
263	2003-01-09T18:27	303.0	5	586	19.50	619.16				2.770	2.820		0.443	916.0	-25.0
264	2003-01-09T20:05			320		619.60
264	2003-01-09T20:05	307.0	5	555	18.50	622.18				2.770	2.920
265	2003-01-09T21:35	176.0	1	659	11.00	624.07	stopped due to persistent ant-torque rotation			2.700	2.830
266	2003-01-09T23:15			559		625.10	tight antitorque by 1 mm to 31.5 mm, switched to Rufli drill head from last year with 0.22 mm clearance to front of shoe					130.0
266	2003-01-09T23:15	313.0	6	324	20.00	627.16				3.060	3.330
267	2003-01-10T08:22	246.0	1	533	17.00	629.60	loosened antitorque by 0.5 mm, 31 mm now			2.800	3.350	136.0
268	2003-01-10T10:00			671		631.48						139.0
268	2003-01-10T10:00	291.0	4	186	19.00	632.59				3.100	3.200
269	2003-01-10T11:48	245.0	1	507	15.00	634.94				3.100	3.100	142.0	0.420	916.0	-25.0
270	2003-01-10T13:17	275.0	2	389	17.50	637.72				3.030	3.300	119.0
271	2003-01-10T14:55	250.0	1	321	16.00	640.35				3.330	3.540
272	2003-01-10T16:30	285.0	2	311	16.50	643.08				3.400	3.400	128.0
273	2003-01-10T18:30			500		644.93	antitorque blades sharpened					130.0
273	2003-01-10T18:30	322.0	2	539	18.00	646.19				3.000	3.200
274	2003-01-10T20:12			405		648.69
274	2003-01-10T20:12	338.0	4	379	18.00	649.72				3.280	3.350
275	2003-01-10T21:50			492		652.20	changed to Rufli head from last year with freshly sharpened cutters 0.2 mm to 0.22 mm clearance to front edge
275	2003-01-10T21:50	268.0	2	464	15.50	652.43				3.250	3.500
276	2003-01-11T00:00			361		653.17						146.0
276	2003-01-11T00:00	188.0	2	289	13.50	654.15				3.560	3.370		0.443	915.0	-25.3
277	2003-01-11T08:20			237		654.73						120.0
277	2003-01-11T08:20	238.0	2	331	17.50	656.60				3.400	3.400
278	2003-01-11T10:21			607		656.64	reduced clearance by 1 shim					125.0
278	2003-01-11T10:21	279.0	2	253	18.00	659.40				2.860	2.860
279	2003-01-11T12:00			372		660.06						129.0
279	2003-01-11T12:00			459		661.74				2.700	2.800
279	2003-01-11T12:00	300.0	5	485	18.00	662.43
280	2003-01-11T13:55			518		664.22						134.0
280	2003-01-11T13:55	287.0	2	457	21.00	665.26				2.800	2.830
281	2003-01-11T15:36			413		665.61						139.0
281	2003-01-11T15:36	214.0	3	694	13.00	667.38				2.650	2.680
282	2003-01-11T17:22	299.0	2	375	19.00	670.42				3.660	3.780	145.0
283	2003-01-12T11:55	294.0	1	625	18.50	673.28		put on new electronics with TERN controller, 300 V modules, 50 V motor, 80:1 gear		3.450	3.450	155.0	0.522	918.0	-26.5
284	2003-01-12T13:55			240		675.46						116.0
284	2003-01-12T13:55	312.0	4	355	19.85	676.40		put on old electronics, 375 V modules, 60 V motor, 80:1 gear to speed up communications and implement further heating for inclinometers		3.550	3.760
285	2003-01-12T15:55			441		678.34						129.0
285	2003-01-12T15:55	306.0	6	180	18.00	679.40				3.570	3.780
286	2003-01-12T17:30	309.0	1	374	18.50	682.55				3.860	4.080	131.0
287	2003-01-12T19:10			412		685.01						132.0
287	2003-01-12T19:10	318.0	3	534	19.00	685.74				3.750	3.750
288	2003-01-12T21:02			437		687.62						135.0
288	2003-01-12T21:02	322.0	3	494	20.00	688.93				3.700	3.800
289	2003-01-12T22:51			451		690.87						139.0
289	2003-01-12T22:51	336.0	2	518		692.25				3.900	3.900		0.565	917.0	-26.1
290	2003-01-13T08:20			599		694.71						108.0
290	2003-01-13T08:20	300.0	3	473	19.00	695.35				3.770	3.820
291	2003-01-13T10:12			479		696.46						113.0
291	2003-01-13T10:12	306.0	3	247	18.70	698.33				3.750	3.840
292	2003-01-13T11:48	295.0	3	507	18.00	701.36				3.710	3.880	117.0
293	2003-01-13T13:37			577		703.34						123.0
293	2003-01-13T13:37	299.0	3	362	18.00	704.35				3.500	3.700
294	2003-01-13T15:16			379		705.38						128.0
294	2003-01-13T15:16	321.0	3	501	17.50	707.53				3.700	3.700
295	2003-01-13T16:58	279.0	3	482	18.00	710.25				3.420	3.800	133.0
296	2003-01-13T18:45	299.0	1	554	18.00	713.33				3.800	3.800	138.0
297	2003-01-13T20:32	273.0	2	390	17.00	716.12				3.700	3.700	142.0	0.522	917.0	-26.2
298	2003-01-13T22:06			605		717.19						111.0
298	2003-01-13T22:06	314.0	3	446	20.20	719.30				3.500	3.800
299	2003-01-14T08:17	275.0	4	632	17.00	722.04				3.500	3.760	116.0
300	2003-01-14T10:12			522		724.46						121.0
300	2003-01-14T10:12	336.0	2	449	18.50	725.38				3.400	3.570
301	2003-01-14T12:24			489		727.47						126.0
301	2003-01-14T12:24	337.0	4	578	18.00	728.54				3.600	3.600
302	2003-01-14T14:28			676		730.74						130.0
302	2003-01-14T14:28	231.0	2	386	19.00	731.75				3.800	3.800
303	2003-01-14T16:28	279.0	1	515	13.00	733.82				3.660	3.960	136.0
304	2003-01-14T18:15			692		735.50		more than 9 fake readings				142.0
304	2003-01-14T18:15	330.0	1	447	18.00	737.04				3.550	3.550
305	2003-01-14T20:29			485		739.55						144.0
305	2003-01-14T20:29	294.0	2	594	18.00	740.03				3.300	3.500		0.562	918.0	-26.0
306	2003-01-14T22:22			489		742.60						109.0
306	2003-01-14T22:22	338.0	2	221	19.00	743.33				3.400	3.400
307	2003-01-15T09:10	251.0	1	652	17.40	745.81		put on new electronics with TERN controller, 300 V modules, 50 V motor, 80:1 gear		2.070	2.160
308	2003-01-15T10:41	253.0	3	534	14.80	748.41				3.020	3.340	119.0
309	2003-01-15T11:59	303.0	1	515	18.50	751.51		put on old electronics, 375 V modules, 60 V motor, 80:1 gear to speed up communications and implement further heating for inclinometers		3.000	3.040	124.0
310	2003-01-15T13:24	306.0	3	505	17.50	754.48				3.150	3.150	128.0
311	2003-01-15T15:14					754.48		could not start motor, changed to 375 V modules, old computer and 80:1 gear				131.0
312	2003-01-15T16:32			576		756.03						133.0
312	2003-01-15T16:32	317.0	3	637	18.00	757.49				3.220	3.440
313	2003-01-15T18:30			790		759.95						137.0
313	2003-01-15T18:30	280.0	2	568	18.00	760.50				3.300	3.300
314	2003-01-15T20:12	270.0	3	659	16.50	763.09				3.000	3.200	144.0
315	2003-01-15T21:53	257.0	1	542	16.00	765.78				3.300	3.500	149.0	0.645	916.5	-24.7
316	2003-01-15T23:34	288.0	1	615	19.50	768.65		changed to new computer, 300 V modules have been modified to 375 V, changed operational amplifier, rectifier diode checked		3.300	3.400	110.0
317	2003-01-16T08:15	253.0	2	541	16.00	771.17	changed to Rufli head from 2001 season, 0.19 mm - 0.2 mm clearance to front edge of shoe			3.340	3.390	115.0
318	2003-01-16T09:44			443		772.87						120.0
318	2003-01-16T09:44	281.0	4	663	17.00	773.98				3.280	3.380
319	2003-01-16T11:28			406		774.98						126.0
319	2003-01-16T11:28	320.0	2	640	20.50	777.13				3.120	3.180
320	2003-01-16T12:59			366		779.43	tower motor gone, operating with chain hoist					131.0
320	2003-01-16T12:59	297.0	5	347	19.00	780.19				2.900	3.100
321	2003-01-16T16:10			787		781.84	first core not broken, release tension again
321	2003-01-16T16:10	175.0	1	610	11.50	781.84				2.600	3.140	134.0
322	2003-01-16T18:05	307.0	5	351	18.00	784.96				2.900	3.200	140.0
323	2003-01-16T19:56			594		785.90
323	2003-01-16T19:56	286.0	2	356	7.50	787.71				2.700	2.850
324	2003-01-16T22:09	295.0	4	647	18.10	790.85	changed to Danish drill head with sharpened cutters, sharpened skates			3.100	3.100	150.0	0.530	918.0	-26.2
FR27	2003-01-17T00:55				1.60	790.85						121.0
325	2003-01-17T08:22			756		793.02						119.0
325	2003-01-17T08:22	331.0	5	379	18.00	793.86				3.060	3.300
326	2003-01-17T09:59	306.0	1	515	18.00	797.22				2.740	2.880	125.0
327	2003-01-17T11:40			493		798.29						132.0
327	2003-01-17T11:40	345.0	3	364	19.00	800.59				2.960	3.120
328	2003-01-17T13:28	299.0	1	774	19.50	803.63				2.800	2.800	135.0
329	2003-01-17T15:08	305.0	2	584	19.00	806.66				3.100	3.100	139.0
330	2003-01-17T16:39	270.0	4	726	17.50	809.34				2.920	3.140	144.0
331	2003-01-17T18:09	311.0	4	398	18.00	812.47				2.560	2.980	149.0
332	2003-01-17T19:35	316.0	3	782	19.00	815.64				2.800	3.100	154.0	0.502	917.0	-25.8
333	2003-01-17T21:04	311.0	1	387	19.00	818.74				2.900	3.100	123.0
334	2003-01-17T22:34	303.0	3	573	19.80	821.86				3.300	3.300	127.0
335	2003-01-18T08:20	305.0	3	493	18.00	824.84				2.630	2.880	132.0
336	2003-01-18T09:43	297.0	2	409	17.60	827.82				2.830	2.980	137.0
337	2003-01-18T11:01	308.0	1	465	18.00	830.88				2.570	3.020	142.0
338	2003-01-18T12:20	311.0	2	568	18.00	834.00				3.000	3.000	148.0	0.500	918.0	-24.7
339	2003-01-18T13:49	287.0	1	350	17.00	836.84				2.900	3.100	117.0
340	2003-01-18T15:19	312.0	3	573	19.00	839.95				2.800	2.800	122.0
341	2003-01-18T16:49	299.0	2	536	17.00	842.97				2.700	2.800	127.0	0.300	912.0	-20.0
342	2003-01-19T11:14	309.0	2	573	19.00	845.99			broken spring in pump changed	3.200	3.500	111.0
343	2003-01-19T12:54	311.0	1	420	18.20	849.12				2.570	2.880	116.0
344	2003-01-19T14:14	302.0	2	710	20.00	852.21				2.500	2.800	121.0
345	2003-01-19T15:47	308.0	1	493	19.00	855.20				2.800	3.200	126.0
346	2003-01-19T17:27	311.0	1	355	18.50	858.36						130.0
347	2003-01-19T19:03	297.0	2	549	18.70	861.43				2.880	3.060	136.0
348	2003-01-19T20:33	317.0	1	648	19.00	864.56				2.880	2.960	141.0	0.476	917.0	-25.4
349	2003-01-19T22:01	310.0	2	640	18.50	867.57				2.670	2.820	118.0
350	2003-01-19T23:25	317.0	1	570	18.00	870.78				2.810	3.100	122.0
351	2003-01-20T01:21	266.0	1	568	16.00	873.37				3.860	3.860	126.5
352	2003-01-20T03:04			474		875.12						132.0
352	2003-01-20T03:04	283.0	2	398	17.50	876.31				3.200	3.200
353	2003-01-20T04:46			559		877.71						136.0
353	2003-01-20T04:46	311.0	2	719	17.50	879.43				3.400	3.400
354	2003-01-20T06:30	295.0	100	488	18.00	882.46						140.0
355	2003-01-20T08:20	312.0	1	325	19.00	885.60				3.000	3.200	140.0	0.565	918.0	-27.0
356	2003-01-20T10:14	310.0	1	515	18.00	888.56				3.100	3.100	112.0
357	2003-01-20T11:45	309.0	3	528	18.50	891.73				2.900	3.200	117.0
358	2003-01-20T13:16	316.0	2	677	19.50	894.81				2.560	2.890	121.0
359	2003-01-20T14:50	294.0	3	602	18.20	897.82				2.480	2.750	127.0
360	2003-01-20T16:14	320.0	2	438	18.00	900.85				3.200	3.200	132.0
361	2003-01-20T17:42	296.0	1	525	18.00	904.00				2.850	2.850	137.0
362	2003-01-20T19:12	303.0	1	369	18.50	907.00				2.700	2.980	142.0
363	2003-01-20T20:43	311.0	2	360	18.50	910.08				2.840	2.960	147.0	0.538	917.0	-25.5
364	2003-01-20T22:04	300.0	2	517	18.00	913.07				2.600	3.080	115.0
365	2003-01-20T23:29	298.0	3	559	18.00	916.13				2.540	2.740	120.0
366	2003-01-21T00:55	313.0	1	412	18.50	919.20						123.0
367	2003-01-21T02:35	296.0	1	492	18.00	922.21						125.0
368	2003-01-21T04:10	297.0	100	370	18.00	925.19						132.0
369	2003-01-21T06:03			800		926.44						138.0
369	2003-01-21T06:03	328.0	2	652	18.00	928.22
370	2003-01-21T08:18	309.0	1	469	19.00	931.54				3.100	3.300	143.0
371	2003-01-21T09:54	289.0	1	563	17.00	934.38				3.300	3.300	149.0	0.521	920.0	-28.5
372	2003-01-21T11:22	306.0	1	669	20.00	937.53				2.800	3.100	119.0
373	2003-01-21T12:55	316.0	2	506	19.00	940.45				2.600	3.000	121.0
374	2003-01-21T14:28	305.0	1	695	21.50	943.54				2.680	2.800	127.0
375	2003-01-21T15:59	280.0	3	712	18.00	946.45	changed to Rufli head from last year			2.800	3.100	133.0
376	2003-01-21T17:55			435		948.53						139.0
376	2003-01-21T17:55	310.0	2	440	18.70	949.39				3.000	3.100
377	2003-01-21T20:07			243		951.63						145.0
377	2003-01-21T20:07	289.0	2	379	17.50	952.14				3.080	3.660		0.571	915.0	-23.5
378	2003-01-21T22:13	286.0	2	451	17.00	955.13	changed to freshly sharpened Danish head			2.720	3.160	112.0
379	2003-01-21T23:38	296.0	3	753	18.00	958.19				2.800	3.470	117.0
380	2003-01-22T01:10	279.0	1	399	16.50	960.77						121.0
381	2003-01-22T02:44			469		963.02						127.0
381	2003-01-22T02:44	311.0	3	446	18.50	963.99
382	2003-01-22T04:18			469		966.28						130.0
382	2003-01-22T04:18	333.0	3	415	18.50	967.24
383	2003-01-22T06:00	243.0	1	611	10.00	969.81						135.0
384	2003-01-22T07:55	203.0	1	391	19.50	971.85				2.500	2.500	139.0
385	2003-01-22T09:24	302.0	1	540	18.50	974.77				2.600	2.800	144.0	0.500	920.0	-28.0
386	2003-01-22T10:51	305.0	1	384	19.00	977.85				2.500	2.600	126.0
387	2003-01-22T12:16	315.0	2	386	19.00	981.00				3.000	3.100	119.0
388	2003-01-22T13:47	278.0	2	619	19.00	983.76				2.780	2.800	123.0
389	2003-01-22T15:06	299.0	100	485	18.00	986.67				3.050	3.050	127.0
390	2003-01-22T16:47	314.0	1	732	18.50	989.89				2.700	2.800	132.0
391	2003-01-22T18:27			503		992.40						136.0
391	2003-01-22T18:27	328.0	2	426	18.50	992.98				2.760	2.940
392	2003-01-22T20:07	285.0	1	541	18.00	996.02				2.370	2.860	141.0	0.477	918.0	-27.1
393	2003-01-22T21:29	308.0	1	395	18.00	998.89				2.260	2.760	113.0
394	2003-01-22T22:50	298.0	1	406	17.00	1001.95				2.540	2.740	118.0
FR28	2003-01-23T01:20				4.00	1001.95
395	2003-01-23T02:48			471		1003.42						124.0
395	2003-01-23T02:48	319.0	2	368	18.00	1005.07
396	2003-01-23T04:45			487		1006.87						128.0
396	2003-01-23T04:45	330.0	2	467	18.50	1008.39
397	2003-01-23T06:21	318.0	1	570	18.50	1011.73						132.0
398	2003-01-23T07:57	310.0	1	408	18.50	1014.91				2.600	3.000	138.0
399	2003-01-23T09:27	311.0	1	552	19.00	1017.88				2.500	2.800	144.0	0.549	917.0	-25.5
400	2003-01-23T11:12	307.0	1	269	19.00	1020.96			replaced worn out seal, new springs in pump	2.500	2.600	110.0
401	2003-01-23T12:45	279.0	2	700	17.00	1023.72				2.820	2.880	114.0
402	2003-01-23T14:16	303.0	1	422	20.00	1026.80				2.300	2.570	120.0
403	2003-01-23T15:46	284.0	1	453	16.00	1029.37				2.680	2.710	125.0
404	2003-01-23T17:28	306.0	1	412	18.50	1032.69				2.600	2.600	130.0
405	2003-01-23T19:14	285.0	1	742	18.00	1035.55				2.410	2.920	135.0
406	2003-01-23T20:47	289.0	1	433	19.00	1038.20	changed to freshly tuned Rufli head			3.000	3.900	141.0	0.655	914.0	-22.5
407	2003-01-23T22:46	306.0	1	411	17.50	1041.22				2.740	2.880	100.0
408	2003-01-24T00:10	275.0	1	398	17.50	1044.21						108.0
409	2003-01-24T01:46			618		1046.11						114.0
409	2003-01-24T01:46	311.0	2	494	18.00	1047.25
410	2003-01-24T03:29			575		1049.02						118.0
410	2003-01-24T03:29	293.0	3	366	18.00	1050.30
411	2003-01-24T05:32	285.0	1	524	17.50	1053.26	winch inverter failure, dripped 2 m of cable suddenly down. Fixed after power off and power on					124.0
412	2003-01-24T07:08	299.0	1	855	18.50	1056.24				2.600	2.600	128.0
413	2003-01-24T08:55			547		1057.67						132.0
413	2003-01-24T08:55	325.0	2	708	18.00	1059.34				2.900	3.100
414	2003-01-24T10:32			626		1060.95						139.0
414	2003-01-24T10:32	296.0	2	483	18.50	1062.26				2.900	2.900
415	2003-01-24T12:28	232.0	1	408	16.00	1064.54	readjusted clearance of linings, because winch brake did not open anymore			2.610	2.660	107.0	0.517	919.0	-27.0
416	2003-01-24T15:40	318.0	1	576	18.00	1067.98				2.500	2.600	112.0
417	2003-01-24T17:27	312.0	1	554	18.00	1071.08				2.500	3.000	116.0
418	2003-01-24T19:06	312.0	1	658	18.50	1074.02				2.440	2.530
419	2003-01-24T20:46	313.0	1	684	28.00	1077.18	replaced missing screw on upper valve			2.460	2.720	125.0
420	2003-01-24T22:22	306.0	1	481	18.50	1080.25				2.780	2.900	130.0
421	2003-01-25T00:05	321.0	1	612	19.00	1083.51						135.0
422	2003-01-25T02:14			697		1085.73	put on Danish drill head with freshly sharpened cutters, clearance 0.19 mm - 0.2 mm to front edge of shoe					131.0
422	2003-01-25T02:14	301.0	2	422	18.00	1086.46				3.400	3.400
423	2003-01-25T03:58			783		1088.24						136.0
423	2003-01-25T03:58	207.0	2	698	14.00	1088.57
424	2003-01-25T06:12	287.0	1	497	18.00	1091.61	changed to other core barrel with Danish drill head, clearance 0.2 mm - 0.21 mm					144.0	0.491	919.0	-27.8
425	2003-01-25T08:17	339.0	1	399	18.00	1094.84				2.400	2.500	122.0
426	2003-01-25T09:54	319.0	1	686	18.50	1097.97				2.500	2.500	128.0
427	2003-01-25T11:22	317.0	1	697	18.50	1101.13				2.600	2.600	133.0
428	2003-01-25T12:52	307.0	1	708	18.50	1104.06				2.180	2.290	137.0
429	2003-01-25T14:22	315.0	2		21.50	1107.34				2.320	2.400	142.0	0.600	920.0	-28.5
430	2003-01-25T15:50	316.0	1	377	18.50	1110.39				2.460	3.060	107.0
431	2003-01-25T17:17	314.0	1	456	18.00	1113.52		changed to old computer with 50 V motor		2.290	2.640	112.0
432	2003-01-26T10:57	277.0	1	664	19.00	1116.52	total power shortage for whole trench			3.200	3.200	117.0
433	2003-01-26T13:29	275.0	1	665	18.00	1119.15				2.940	3.130	122.0
434	2003-01-26T16:30	297.0	1	671	18.00	1122.09	switched power supply for modem from net to UPS (uninterruptable power supply)			2.860	3.020	127.0
435	2003-01-26T18:50	291.0	1	464	18.00	1125.04	switched power supply for modem back, because of faulty readings from the depth meter			3.000	3.000	133.0
436	2003-01-26T20:36	307.0	1	507	17.50	1128.41				2.700	2.700	137.0
437	2003-01-26T22:11			440		1130.22						142.0
437	2003-01-26T22:11	324.0	2	451	18.00	1131.23				2.500	2.500		0.547	917.0	-25.5
438	2003-01-27T00:00	260.0	1	397	17.00	1134.03						120.0
439	2003-01-27T01:50	306.0	1	486	18.00	1136.96						112.0
440	2003-01-27T03:30	275.0	1	703	17.00	1139.81				2.800	2.800	116.0
441	2003-01-27T05:10			513		1141.22						125.0
441	2003-01-27T05:10	304.0	2	737	17.50	1142.61
442	2003-01-27T07:12			490		1143.80						130.0
442	2003-01-27T07:12	279.0	2	549	17.00	1145.37				2.550	2.780
443	2003-01-27T09:04	190.0	2	508	15.00	1147.43	changed to the other core barrel with freshly sharpened head			2.960	2.960	134.0
444	2003-01-27T10:59	247.0	1	476	14.00	1150.13	one screw of spiral lost			3.460	3.540	137.0
445	2003-01-27T12:51	269.0	1	700	15.50	1152.68				2.500	2.500	140.0	0.525	919.0	-27.6
446	2003-01-27T14:34			448		1153.40	bronze on damaged knife, changed to other Danish head	changed to new electronics, because of slightly higher current limit settings				109.0
446	2003-01-27T14:34	324.0	2	735	18.00	1155.78				2.700	3.100
447	2003-01-27T17:24	46.0	1	375	5.20	1156.33	cutting current going straight up to the limit					114.0
448	2003-01-27T18:58	40.0	1	406	3.00	1156.62	marks of spiral on inner barrel					115.0
449	2003-01-27T20:23	269.0	1	570	16.00	1159.52						117.0
450	2003-01-27T23:02	129.0	1	463	8.00	1161.14	changed to HT drill with plastic spirals, picked up one screw head sitting in the spirals					118.0
451	2003-01-28T01:00	123.0	1	733	10.00	1162.44				2.600	2.600	121.0
452	2003-01-28T02:40			506		1163.03	changed back to long drill					126.0
452	2003-01-28T02:40	112.0	2	544	8.50	1163.16	no rotation at 12 A
453	2003-01-28T04:35			849		1164.48	switched to Danish head with ARN 42.5° cutters, clearance 0.19 mm - 0.2 mm to front edge of shoe					129.0
453	2003-01-28T04:35	312.0	2	450	18.00	1166.16				3.500	3.500
454	2003-01-28T06:30			459		1168.39						134.0
454	2003-01-28T06:30	274.0	2	612	15.00	1168.98	switched to Rufli head from last year
455	2003-01-28T08:29	283.0	1	611	16.50	1171.91				3.040	3.100	138.0
456	2003-01-28T10:08			438		1173.97						141.0
456	2003-01-28T10:08	333.0	2	829	19.00	1174.99				2.900	3.070		0.538	922.0	-30.6
457	2003-01-28T13:44	117.0	1	506	8.00	1176.33	changed to Danish head, clearance 0.22 mm to front edge of shoe, no rotation possible					106.0
458	2003-01-28T15:37	260.0	1	446	15.00	1179.00	changed to Rufli head from last year			2.960	3.160	110.0
459	2003-01-28T17:35	87.0	2	898	2.00	1179.79			pump badly blocked with chips			115.0
460	2003-01-28T19:00			898		1180.28	no core break, pull down, rotate					117.0
460	2003-01-28T19:00	56.0	1	504	3.50	1180.28				3.400	3.600
461	2003-01-28T20:43			904		1181.30	changed springs in both core catchers, put in one shim respectively, no core break, went down to 90 kg					120.0
461	2003-01-28T20:43	96.0	1	706	6.00	1181.30	no rotation possible			3.600	3.600
462	2003-01-28T22:15	206.0	1	544	13.00	1183.39				3.400	3.400	124.0
FR29	2003-01-29T01:26				1.00	1183.39	calibration of load cell with dynamometer: 700 N too high reading at 20500 N
463	2003-01-29T08:05	304.0	1	663	18.00	1186.38				3.360	3.440	128.0
464	2003-01-29T10:09	302.0	1	445	17.00	1189.50				3.600	4.100	135.0
465	2003-01-29T12:19	293.0	1	582	17.00	1192.46				3.200	3.400	140.0
466	2003-01-29T14:15	305.0	1	478	17.50	1195.43	put one shim under the shoes respectively			2.600	2.800	143.0	0.522	920.0	-28.5
467	2003-01-29T16:13			705		1195.38						109.0
467	2003-01-29T16:13	319.0	2	525	18.50	1198.37	changed to Danish head with 0.18 mm - 0.19 mm clearance to front of shoe			3.000	3.160
468	2003-01-29T18:27			556		1200.50						114.0
468	2003-01-29T18:27	322.0	2	866	18.50	1201.64				3.200	3.300
469	2003-01-29T20:13			461		1202.87						119.0
469	2003-01-29T20:13	338.0	2	425	18.50	1205.01				3.200	3.200
470	2003-01-29T22:10			720		1206.45
470	2003-01-29T22:10	208.0	2	603	6.00	1207.25
471	2003-01-30T01:33			531		1208.77		changed to new electronics: put more inclinometer heating, fixed 3 loose screws, where one had shorted, ground connector of 2 V source had gone off				129.0
471	2003-01-30T01:33	237.0	2	672	17.00	1209.47
472	2003-01-30T02:25			659		1210.73						136.0
472	2003-01-30T02:25	299.0	2	831	9.00	1212.63			screw on side loose
473	2003-01-30T04:27			586		1212.89						140.0
473	2003-01-30T04:27	96.0	2	473	17.00	1213.47
474	2003-01-30T05:55	259.0	1	587	15.00	1216.20						145.0
475	2003-01-30T07:57	282.0	1	740	16.70	1219.20				3.150	3.160	150.0	0.572	918.0	-26.3
476	2003-01-30T09:48			490		1220.40						112.0
476	2003-01-30T09:48	212.0	2	498	8.00	1221.02			pump badly blocked with chips	3.070	3.220
477	2003-01-30T11:39			892		1221.73						116.0
477	2003-01-30T11:39	208.0	2	463	16.00	1223.06				3.020	3.210
478	2003-01-30T13:14			731		1225.18						121.0
478	2003-01-30T13:14	320.0	2	490	17.50	1226.26				2.700	3.000
479	2003-01-30T15:20			458		1228.69			cleaned and adjusted top valve			126.0
479	2003-01-30T15:20	326.0	2	751	18.00	1229.52				3.000	3.000
480	2003-01-30T17:13	272.0	1	585	16.50	1232.98				2.950	3.180	131.0
481	2003-01-30T18:48	303.0	1	459	17.00	1235.33				2.850	2.850	135.0
482	2003-01-30T21:00	292.0	1	832	17.00	1238.40				3.000	3.200	140.0
483	2003-01-30T22:57	309.0	1	544	18.00	1241.49						145.0	0.501	917.0	-26.0
484	2003-01-31T00:37	301.0	1	613	17.00	1244.46						115.0
485	2003-01-31T02:10	289.0	1	506	16.00	1247.41						121.0
486	2003-01-31T03:39	285.0	1	474	16.00	1250.27						126.0
487	2003-01-31T05:12	277.0	1	474	15.00	1253.02						130.0
488	2003-01-31T06:40	292.0	1	506	17.00	1255.94						135.0
489	2003-01-31T08:13	311.0	1	598	17.50	1258.93				2.980	3.140	139.0
490	2003-01-31T09:50	310.0	1	576	17.30	1261.99				3.180	3.180	143.0	0.552	918.0	-26.4
491	2003-01-31T11:22	311.0	1	618	17.50	1265.04				2.980	3.160	109.0
492	2003-01-31T13:02	308.0	1	592	17.00	1268.17				2.500	2.700	114.0
493	2003-01-31T14:41	262.0	1	494	16.00	1270.97				3.000	3.000	118.0
494	2003-01-31T16:15			695		1273.18						123.0
494	2003-01-31T16:15	321.0	2	434	17.50	1273.89				3.140	3.480
495	2003-01-31T18:03	306.0	1	660	18.00	1277.05				3.080	3.150	128.0
496	2003-01-31T20:00	311.0	1	460	18.00	1280.24				2.750	2.750	133.0
497	2003-01-31T21:46	320.0	1	656	18.00	1283.45	changed to shaft with narrow holes			2.900	2.900	137.0
498	2003-01-31T23:33	292.0	1	695	17.00	1286.49						143.0
499	2003-02-01T01:12	290.0	1	412	17.00	1289.36						147.0	0.572	918.0	-26.3
500	2003-02-01T02:45	287.0	1	424	16.00	1292.16						115.0
501	2003-02-01T04:12	297.0	1	732	17.00	1295.19						123.0
502	2003-02-01T05:42	284.0	1	618	17.00	1298.03						128.0
503	2003-02-01T07:08	264.0	1	567	16.50	1300.67				3.010	3.100	133.0
504	2003-02-01T09:04	308.0	1	551	16.50	1303.54				3.080	3.820	134.0
505	2003-02-01T10:29	308.0	1	677	17.00	1306.71				2.600	2.870	140.0
506	2003-02-01T11:59	313.0	1	408	17.00	1309.77				2.860	2.870	115.0	0.622	914.0	-22.8
507	2003-02-01T13:27	312.0	1	521	18.00	1313.00				2.800	2.800	108.0
508	2003-02-01T15:00	288.0	1	555	17.50	1316.06				2.900	2.900	112.0
509	2003-02-01T16:29	286.0	1	572	17.50	1318.72				2.900	2.900	117.0
510	2003-02-01T17:59	307.0	1	649	17.50	1321.81				2.900	2.900	122.0
511	2003-02-02T11:23	305.0	1	594	18.00	1324.83				2.900	2.900	126.0
512	2003-02-02T13:06	302.0	1	378	17.50	1327.92				2.690	2.740	132.0
513	2003-02-02T14:44	303.0	1	672	17.00	1331.01				2.700	2.700	140.0
514	2003-02-02T16:18	308.0	1	638	17.00	1333.40	two power failures on the way down		both bronce slide bearings broken	2.600	2.600	142.0
515	2003-02-02T18:40	320.0	1	510	17.80	1337.25				2.620	2.730	145.0
516	2003-02-02T20:30	268.0	1	532	16.50	1340.02						155.0
517	2003-02-02T22:04	297.0	1	633	17.00	1343.03						158.0	0.620	919.0	-28.1
518	2003-02-02T23:40	310.0	1	391	16.50	1346.04				2.550	2.600	121.0
519	2003-02-03T01:49	304.0	1	574	17.00	1349.12				2.400	2.500	125.0
520	2003-02-03T03:57	316.0	1	558	18.00	1352.20				2.600	2.650	129.0
521	2003-02-03T06:03	319.0	1	563	18.00	1355.43				2.800	2.800	133.0
522	2003-02-03T08:35	313.0	1	586	18.00	1358.29				2.800	2.800	137.0
523	2003-02-03T10:23	301.0	1	471	18.00	1361.61				2.700	2.900	142.0
524	2003-02-03T13:11	285.0	1	865	17.50	1364.41			changed all four slide bearings			147.0
525	2003-02-03T14:51	304.0	1	712	17.00	1367.52						155.0
526	2003-02-03T17:00	292.0	1	508	17.00	1370.37				2.500	2.500	157.0	0.485	921.0	-29.5
527	2003-02-03T18:57	283.0	1	729	16.50	1373.11	changed to Danish drill head with new cutters and sharpened core catchers, clearance to front of shoe 0.18 mm			2.700	2.900	124.0
528	2003-02-03T20:52	230.0	1	481	13.50	1375.58				3.100	3.100	133.0
529	2003-02-03T22:20	271.0	1	657	15.00	1378.27	modified rpm limit and torque limit settings of winch controller to pull faster and more secure			3.200	3.200	138.0
530	2003-02-03T23:55	301.0	1	489	17.00	1381.27				3.000	3.100	143.0
531	2003-02-04T01:37	295.0	1	826	16.50	1384.23				3.200	3.200	145.0
532	2003-02-04T03:49			779		1386.10						151.0
532	2003-02-04T03:49	321.0	2	867	18.00	1387.21				3.100	3.150
533	2003-02-04T05:49	264.0	1	588	16.00	1390.47				3.100	3.100	157.0
534	2003-02-04T07:53			470		1392.32						163.0
534	2003-02-04T07:53	342.0	2	495	18.00	1393.35				3.100	3.300		0.434	922.0	-31.4
535	2003-02-04T09:49			912		1395.44	no core break, lower to 140 kg					132.0
535	2003-02-04T09:49	204.0	1	500	13.00	1395.44				3.200	3.200
536	2003-02-04T11:27	285.0	1	591	17.50	1398.33				3.200	3.200	135.0
537	2003-02-04T13:09	237.0	1	490	14.00	1400.71	winch has really bad spooling errors					140.0
538	2003-02-04T14:50	237.0	1	824	13.00	1403.06	spooling down to arrange cable					147.0
539	2003-02-04T16:50	254.0	1	907	14.80	1405.66				3.200	3.200	152.0
540	2003-02-04T20:20	98.0	1	904	5.00	1406.68	changed to Danish drill head No.1, clearance 0.16 mm - 0.17 mm			2.750	2.750	157.0
541	2003-02-04T21:45	217.0	1	446	14.00	1408.90	changed to Danish drill head No. 0, clearance 0.18 mm			3.100	3.100	150.0	0.572	921.0	-30.0
542	2003-02-04T23:32	311.0	1	707	17.50	1411.86				3.000	3.000	127.0
543	2003-02-05T01:33	258.0	1	492	16.00	1414.58				3.050	3.300	132.0
544	2003-02-05T03:28	276.0	1	504	17.50	1417.39				3.000	3.050	136.0
545	2003-02-05T05:30	256.0	1	743	14.50	1420.10				3.050	3.100	141.0
546	2003-02-05T07:13			479		1421.20						146.0
546	2003-02-05T07:13	305.0	2	494	17.00	1422.93	changed to Danish drill head No.1, clearance 0.18 mm - 0.19 mm			3.400	3.400
547				801		1424.37						149.0
547	2003-02-05T09:30	266.0	2	502	16.00	1425.44				3.400	3.400
548	2003-02-05T11:25			519		1426.72	removed on shim from each cutter respectively					154.0
548	2003-02-05T11:25	192.0	2	708	11.50	1427.40				3.900	3.900
549	2003-02-05T13:17	233.0	1	484	14.00	1429.81				2.800	2.800	158.0	0.556	923.0	-31.8
550	2003-02-05T14:46	298.0	1	526	16.50	1432.76						141.0
551	2003-02-05T16:28	245.0	1	544	14.50	1435.24				2.900	2.900	133.0
552	2003-02-05T18:03	298.0	1	721	17.00	1438.21						134.0
553	2003-02-05T19:49	238.0	1	745	14.00	1440.61						142.0
554	2003-02-05T21:26	272.0	1	828	15.50	1443.34						145.0
FR30	2003-02-05T23:12				2.00	1443.34	very clean hole with tiny amount of grey slush					147.0
555	2003-02-06T00:50	220.0	1	490	13.00	1445.57	soldered broken plug in winchs remote control			2.950	2.950	152.0	0.497	923.0	-32.8
556	2003-02-06T03:09	309.0	1	581	19.00	1448.70				3.000	3.100	125.0
557	2003-02-06T05:10	311.0	1	699	19.00	1451.86				2.950	2.950	127.0
558	2003-02-06T07:09	259.0	1	504	15.00	1454.46				3.200	3.200	130.0
559	2003-02-06T09:13	306.0	1	435	17.50	1457.46	changed to Danish head No.1, clearance 0.18 mm - 0.19 mm			2.900	2.900	132.0
560	2003-02-06T11:03	286.0	1	667	17.00	1460.40				2.900	2.900	137.0
561	2003-02-06T12:54	271.0	1	606	16.00	1462.91						141.0
562	2003-02-06T14:25	286.0	2	653	16.00	1465.71						149.0
563	2003-02-06T15:56	280.0	1	595	16.00	1468.57				3.000	3.000	153.0
564	2003-02-06T17:37	275.0	1	540	16.50	1471.40				3.000	3.100	157.0
565	2003-02-06T19:33	301.0	1	505	17.00	1474.42						161.0	0.521	922.5	-31.6
566	2003-02-06T21:10	32.0	1	472	4.50	1474.68	changed to Rufli head No. 4 with core barrel attachments for testing purpose, clearance 0.165 mm - 0.18 mm to front edge of shoe					143.0
567	2003-02-06T22:20	279.0	1	863	15.50	1477.53	changed back to Danish head No.1, clearance 0.18 mm - 0.19 mm					135.0
568	2003-02-06T23:54	263.0	1	735	14.50	1480.26				2.950	2.950	140.0
569	2003-02-07T01:34	282.0	1	646	16.50	1483.07	winch cable cutting into the lower layer below even at 2750 N load			2.950	2.950	144.0
570	2003-02-07T04:38			533		1484.70						149.0
570	2003-02-07T04:38	331.0	2	579	18.00	1486.18				2.900	3.000
571	2003-02-07T06:41			828		1487.72						154.0
571	2003-02-07T06:41	314.0	2	843	18.00	1489.26				2.900	2.900
572	2003-02-07T09:48	223.0	1	781	15.00	1491.75	changed to Danish head No. 0, clearance 0.17 mm - 0.18 mm					157.0
573	2003-02-07T12:30	240.0	1	795	14.00	1494.12						160.0	0.504	922.0	-31.0
574	2003-02-07T14:33	192.0	1	528	11.50	1496.00						130.0
575	2003-02-07T16:15	174.0	1	521	10.00	1497.59	changed to Danish head No. 1, clearance 0.17 mm - 0.18 mm, antitorque loosened by 0.5 mm		loose screw in pump fastened	3.400	3.400
576	2003-02-07T18:05	313.0	1	555	18.00	1500.76				2.750	2.750	138.0
577	2003-02-07T20:01	284.0	1	533	16.00	1503.67						145.0
578	2003-02-07T21:33	297.0	1	692	17.00	1506.74						150.0
579	2003-02-07T23:12	293.0	1	766	17.50	1509.72				2.500	2.600	154.0
580	2003-02-08T01:20			901		1511.54				2.600	2.600	159.0
580	2003-02-08T01:20	173.0	1	312	17.50	1512.61	about 1.3 m core left in hole due to blocked core catcher						0.538	920.0	-28.7
581	2003-02-08T03:50	309.0	1	465	11.50	1514.41				2.350	2.450	125.0
582	2003-02-08T05:39	308.0	1	500	18.00	1517.62				2.350	2.600	129.0
583	2003-02-08T07:26	304.0	1	561	18.00	1520.76				2.400	2.400	134.0
584	2003-02-08T09:16	286.0	1	781	17.50	1523.50				2.500	2.500	135.0
585	2003-02-08T10:57			592		1525.76						139.0
585	2003-02-08T10:57	335.0	2	645	18.00	1526.63				2.400	2.400
586	2003-02-08T12:51	275.0	1	515	17.00	1529.46						145.0
587	2003-02-08T14:35	306.0	1	757	16.50	1532.56						152.0
588	2003-02-08T16:17	298.0	1	514	18.00	1535.61				2.400	2.400	157.0
589	2003-02-08T18:04	313.0	1	477	18.00	1538.63						160.0	0.518	923.0	-31.5
590	2003-02-08T19:56	304.0	1	456	17.50	1541.70						126.0
591	2003-02-08T21:52	295.0	1	736	17.00	1544.66						130.0
592	2003-02-08T23:42	312.0	1	519	17.50	1547.82				2.200	2.400	135.0
593	2003-02-09T01:35	295.0	1	512	17.50	1550.77						140.0
FR31	2003-02-09T03:28					1550.77						143.0
594	2003-02-09T05:22	60.0	1	751	5.00	1551.55	changed to HT drill with plastic flights for cleaning					144.8
	2003-02-09T15:00					1551.55							0.566	924.0	-33.1
	2003-02-09T16:00					1551.55							0.607	923.0	-32.1
	2003-02-09T17:00					1551.55	indicated liquid level about 75 m						0.206	921.0	-28.5
END	2003-02-10T12:00					1551.55	plumbing with antitorque zeroed on lid					76.2
START	2003-12-08T09:00					1551.55	logging the hole, indicated liquid level about 81m
595	2003-12-09T09:25	204.0	1	837	17.00	1553.05	drill head H1 with 18/100 mm shoe clearance of 4.0 mm shoes; distance pins on upper coupling 14.3-4 mm			3.240	3.240	81.0
596	2003-12-09T12:07	192.0	1	455	12.00	1555.03						88.0
597	2003-12-09T13:54	205.0	1	682	12.50	1557.16				3.400	3.400
598	2003-12-09T16:03	192.0	1	505	11.00	1559.06				3.480	3.480	93.0
599	2003-12-09T18:20	246.0	1	555	14.00	1561.50
600	2003-12-10T09:07	160.5	1	863	9.50	1562.94				3.000	3.000	97.0
601	2003-12-10T11:30	268.0	1	974	16.00	1565.64				3.200	3.200	100.0
602	2003-12-10T14:10			909		1568.24	core did not break on first pull, go back			3.200	3.200
602	2003-12-10T14:10	228.0	1	430	12.50	1568.24				3.200	3.200	98.0
603	2003-12-10T16:30	307.0	2	825	18.00	1571.13			pump disengaged	3.300	3.300	98.0
604	2003-12-10T20:25	184.5	1	1153	13.00	1572.84	core catchers could not be disengaged by going back			3.300	3.300	99.0
605	2003-12-11T09:35	295.0	1	634	17.00	1575.90				2.900	2.900	104.0
606	2003-12-11T11:55	245.0	1	595	15.00	1578.38				3.200	3.200	105.0
607	2003-12-11T14:03	240.0	1	722	13.00	1580.85				3.200	3.200	110.0
608	2003-12-11T16:25	258.0	1	890	13.00	1583.35				3.200	3.200	100.0
609	2003-12-11T18:36	273.5	1	516	15.00	1586.10				3.280	3.280	106.0
610	2003-12-11T20:58	232.5	1	650	14.50	1588.92				3.200	3.200	110.0
611	2003-12-12T10:00	260.0	1	681	16.00	1590.94				3.100	3.100	155.0
612	2003-12-12T13:04	172.0	1	518	11.00	1591.55				3.200	3.200	148.0
613	2003-12-12T15:52	258.0	2	729	15.50	1595.21	bottom break			3.200	3.200	151.0
614	2003-12-12T18:33	165.0	1	729	10.00	1596.86				3.260	3.260	154.0
615	2003-12-12T21:03	312.0	1	596	17.00	1599.89				3.050	3.050	157.0
616	2003-12-13T09:33	276.0	1	607	16.00	1602.70				2.800	2.800	165.0	0.633	919.0	-27.5
617	2003-12-13T13:35	265.0	1	856	15.00	1605.41				2.800	2.800	125.0
618	2003-12-13T16:11	231.0	1	885	14.50	1607.80				2.700	2.700	129.0
619	2003-12-14T15:15	208.0	2	710	11.50	1609.59	changed to drill head H2 withh 17/100 mm clearance an 3.6 mm nominal pitch shoes		pump disengaged, one flap from upper piston found in chips	3.300	3.300	132.0
620	2003-12-14T17:12	222.0	1	505	13.50	1611.99				3.300	3.300	137.0
621	2003-12-14T19:29			900		1614.49	no core break, wnet down to 230 kg and rotated 2 times F8
621	2003-12-14T19:29	246.0	1	712	14.00	1614.49	liquid sample from core barrel: 922.5 kg/m**3 at -38°C			3.300	3.300	143.0
622	2003-12-14T21:33	208.0	1	838	13.00	1616.59				3.300	3.300	147.0
623	2003-12-15T08:15	254.0	1	701	14.50	1619.14				3.200	3.200	153.0
624	2003-12-15T10:36	257.0	1	537	16.00	1621.75				3.300	3.300	158.0
625	2003-12-15T12:46	253.0	1	545	13.00	1624.26				3.300	3.300	160.0	0.575	916.0	-24.5
626	2003-12-15T15:07	233.0	1	878	13.50	1626.50				3.400	3.400	126.0
627	2003-12-15T17:00	232.0	1	520	13.00	1628.79				3.400	3.400	128.0
628	2003-12-15T19:10	236.0	1	582	13.00	1631.16				3.200	3.200	131.0
629	2003-12-15T21:09	220.0	1	633	13.00	1633.46				3.300	3.300	136.0
630	2003-12-15T23:03	230.0	1	726	13.00	1635.61				2.300	2.300	140.0
631	2003-12-16T08:08			888		1637.71	pulled till torque limit settin of winch
631	2003-12-16T08:08	210.0	1	608	13.00	1637.71				2.100	2.100	144.0
632	2003-12-16T10:25	293.0	1	517	16.50	1640.84	changed to drill head H2 0.16, 0.17, 0.17mm clearance, shoes nominal 3.6 mm		pump disengaged	2.950	2.950	149.0
633	2003-12-16T12:40	322.0	3	643	18.00	1643.92				3.000	3.000	154.0
634	2003-12-16T14:38	267.0	1	737	15.00	1646.54				3.100	3.100	159.0
635	2003-12-16T17:00			900		1649.62
635	2003-12-16T17:00	308.0	1	961	19.00	1649.62			pump disengaged	2.900	2.900	167.0	0.431	917.0	-25.9
636	2003-12-16T19:48	282.0	1	610	16.00	1652.40			pump disengaged	2.900	2.900	138.0	0.365	914.0	-22.5
637	2003-12-16T21:58			900		1655.08
637	2003-12-16T21:58	271.0	1	823	16.00	1655.08				3.100	3.100	115.0
FR32	2003-12-17T07:12				0.25	1655.08	went fast down to the bottom of the hole; hole absolutely clean
638	2003-12-17T09:12	251.0	1	554	15.50	1657.48	core catchers sharpened on drill head H2			3.000	3.000	121.0
639	2003-12-17T11:55	283.0	1	604	16.00	1660.57	ice in screw hole under one shoe			2.900	2.900	125.0
640	2003-12-17T14:07	201.0	1	906	12.00	1662.57				3.000	3.000	130.0
641	2003-12-17T15:58	224.0	1	689	13.00	1664.68				3.100	3.100	134.0
642	2003-12-17T17:45	243.0	1	844	14.00	1667.12				3.100	3.100	139.0
643	2003-12-17T19:40	211.0	1	663	12.00	1669.27				3.000	3.000	143.0
644	2003-12-17T21:32	258.0	1	557	14.00	1671.90				3.050	3.100	150.0
645	2003-12-17T23:19	254.0	1	525	14.50	1674.51				3.000	3.000	153.0
646	2003-12-18T08:15	223.0	1	546	13.00	1676.58	head H2: cutters better aligned than +/-5/1000 mm, adjusted to 17/100 mm			3.100	3.100	156.0
647	2003-12-18T10:45	212.0	1	566	13.00	1678.68	core barrel changed			3.000	3.000	161.0
648	2003-12-18T12:54			500		1679.16	no penetration at 270 kg load			2.700	2.700	170.0
648	2003-12-18T12:54	56.0	2	649	4.00	1679.25	no penetration			2.700	2.700	170.0
649	2003-12-18T15:03	59.0	2	632	4.00	1679.88	no penetration			2.600	2.600	172.0	0.442	915.0	-22.4
650	2003-12-18T17:24	83.0	1	862	5.00	1680.74	rested drill with cutter load 0 to get rid of chips under the cutter shoes.			2.300	3.100
651	2003-12-18T20:06	202.0	1	535	11.00	1682.56	grinded lower face of shoes to get rid of edges at screwholes		put in spacer in lower end of the pump	2.900	2.900	142.0
652	2003-12-18T22:07	190.0	1	913	11.00	1684.74				2.900	2.900	145.0
653	2003-12-19T08:33			554		1686.12
653	2003-12-19T08:33	302.0	2	829	18.00	1687.47				2.900	3.100	149.0
654	2003-12-19T11:10	279.0	1	984	15.00	1690.22				2.900	2.900	121.0	0.454	914.0	-22.5
655	2003-12-19T13:44	256.0	1	727	14.00	1692.78				2.800	2.800	126.0
656	2003-12-19T15:48	273.0	1	512	15.00	1695.63				2.900	2.900	130.0
657	2003-12-19T18:14			593		1696.80	no rotation
657	2003-12-19T18:14	282.0	2	620	16.00	1698.29				2.900	2.900	134.0
658	2003-12-19T21:03	241.5	2	647	13.00	1700.82				2.900	2.900	139.0
659	2003-12-19T23:08			828		1702.59	high idle current
659	2003-12-19T23:08	227.0	2	524	14.00	1703.13				2.900	2.900	144.0
660	2003-12-20T08:18	274.0	1	617	17.00	1705.96				2.800	2.800	149.0
661	2003-12-20T10:40	255.0	1	530	16.00	1708.52				2.900	2.900	116.0	0.506	917.0	-25.5
662	2003-12-20T12:50	252.0	1	854	14.50	1711.03				3.000	3.000	120.0
663	2003-12-20T14:49	264.0	1	848	16.50	1713.76				2.800	2.800	124.0
664	2003-12-21T13:15	251.0	1	875	13.50	1716.19				2.900	2.900	129.0
665	2003-12-21T15:20	283.0	1	905	16.00	1719.05				3.000	3.000	133.0
666	2003-12-21T17:26			900		1721.55	pulled and decended to 175
666	2003-12-21T17:26			905		1721.55	pulled and decended to 180
666	2003-12-21T17:26	253.0	1	649	14.00	1721.55				3.100	3.100	137.0
667	2003-12-21T19:33	268.5	1	828	14.50	1724.16				2.900	2.900	142.0
668	2003-12-21T21:22	268.5	1	485	15.00	1726.93				2.900	2.900	148.0
669	2003-12-21T23:46	169.0	2	530	10.00	1728.52	sharpened one cutter		fixed one pin of pump flap	2.750	2.750	120.0	0.419	912.5	-20.5
670	2003-12-22T02:08			900		1731.71
670	2003-12-22T02:08	300.0	1	460	16.50	1731.71				2.650	2.650	125.0
671	2003-12-22T04:10	308.0	1	675	17.00	1734.80				2.650	2.650	129.0
672	2003-12-22T06:15	296.0	1	652	17.00	1737.71				2.800	2.800	134.0
673	2003-12-22T08:15	284.0	1	715	17.00	1740.56				2.700	2.700	139.0
674	2003-12-22T10:25	271.0	1	830	15.00	1743.19				2.700	2.700	144.0
675	2003-12-22T12:10			901		1746.23
675	2003-12-22T12:10	308.0	1	856	17.50	1746.23				3.000	3.000	118.0	0.524	916.0	-24.5
676	2003-12-22T14:22			906		1747.45
676	2003-12-22T14:22	139.0	2	580	9.00	1747.37		piece of plastic on top of core; lower ball bearing of electronics broken		2.500	2.500	115.0
677	2003-12-22T19:07	187.0	1	761	10.50	1749.45				2.300	2.300
678	2003-12-22T21:29	249.5	1	910	15.00	1751.98	changed to other core barrel with drill head H1, shoes nominal 4mm, clearance 16.5, 17, 17.5/100mm, antitorque measured 30.0, 30.3, 31.0 mm			2.100	2.100	122.0
679	2003-12-22T23:33					1752.06	one screw to hold cutters damaged					128.0
FR33	2003-12-23T01:45					1752.06	fished a piece of ball from the broken ball bearing with the magnetic tool
680	2003-12-23T04:24			776		1752.16	persistent anti torque rotation
680	2003-12-23T04:24	295.0	3	804	19.00	1754.64				2.300	2.300	130.0
681	2003-12-23T07:04	259.0	1	780	15.00	1757.60	few antitorque rotations			2.400	2.400	135.0
682	2003-12-23T09:08	228.0	1	598	13.00	1760.07	few antitorque rotations			2.700	2.700	140.0
683	2003-12-23T11:15	240.0	1	614	13.00	1762.27	few antitorque rotations			2.500	2.500		0.524	918.0	-26.0
684	2003-12-23T13:51			900		1764.64	few antitorque rotations
684	2003-12-23T13:51	241.0	1	840	14.00	1764.64				2.600	2.600	110.0
685	2003-12-23T16:38	190.0	1	577	11.00	1766.48	few antitorque rotations			2.600	2.600	115.0
686	2003-12-23T19:07	310.0	1	910	18.00	1769.51	tighed antitorque 32.1 to 33.75mm			2.700	2.700	119.0
687	2003-12-23T21:32	228.0	1	764	15.00	1771.80	tuned drill head H2, 16,17,17/100 mm clearance			2.450	2.450	124.0
688	2003-12-23T23:52	290.0	1	586	16.00	1775.00	removed one shim under each cutter			2.750	2.750	128.0
689	2003-12-24T02:00	215.0	1	784	13.50	1777.23				2.850	2.850	132.0
690	2003-12-24T04:01	208.0	1	580	11.50	1779.33				2.900	2.900	137.0
691	2003-12-24T05:42			906		1782.31
691	2003-12-24T05:42	305.0	1	566	17.00	1782.31				2.850	2.850	140.0
692	2003-12-24T07:50	257.0	1	892	15.00	1784.76				2.900	2.900	145.0
693	2003-12-24T09:42	307.0	1	625	17.00	1787.82				2.900	2.900	149.0
694	2003-12-24T11:45	287.0	1	589	16.50	1790.36				2.800	2.800	128.0	0.579	914.0	-22.5
695	2003-12-24T13:50	257.0	1	766	15.00	1793.29				2.900	2.900	114.0
696	2003-12-24T16:13	276.0	1	772	16.50	1795.86	switched to drill head H1 with Rufli cutter with 0.5 high edge, aligned better than +/-1/100mm, clearance 20/100mm			3.100	3.100	120.0
697	2003-12-25T11:13	256.0	1	827	14.00	1798.44				3.100	3.100	125.0
698	2003-12-25T13:20	296.0	2	865	16.00	1801.35				3.400	3.400	129.0
699	2003-12-25T15:34			644		1803.51				3.200	3.200	134.0
699	2003-12-25T15:34	245.0	2	647	15.00	1803.82				3.200	3.200	134.0
700	2003-12-25T18:10			629		1804.95				3.500	3.500	138.0
700	2003-12-25T18:10	214.0	2	633	12.00	1806.21				3.500	3.500	138.0
701	2003-12-25T20:26			591		1807.25				3.500	3.500	143.0	0.351	917.0	-22.4
701	2003-12-25T20:26	252.0	2	864	14.00	1808.52				3.500	3.500	143.0	0.351	917.0	-22.4
702	2003-12-25T22:30			613		1810.27	no break			3.100	3.100	149.0
702	2003-12-25T22:30	289.0	2	890	18.00	1811.43				3.100	3.100	149.0
703	2003-12-26T01:16			574		1813.02				3.200	3.200	129.0
703	2003-12-26T01:16	265.0	2	865	15.00	1814.19				3.200	3.200	129.0
704	2003-12-26T03:55			900		1816.44	no break			3.100	3.100	132.0
704	2003-12-26T03:55	219.0	1	507	14.00	1816.44				3.100	3.100	132.0
705	2003-12-26T05:53	236.0	1	692	14.00	1818.78				3.150	3.150	136.0
706	2003-12-26T07:56	227.0	1	637	14.00	1821.16				2.600	2.800	141.0
707	2003-12-26T09:55			900		1822.05	no break			3.000	3.000	144.0	0.474	919.5	-28.0
707	2003-12-26T09:55		2	531	7.00	1822.05				3.000	3.000	144.0	0.474	919.5	-28.0
707	2003-12-26T09:55	110.0	2	567	7.00	1822.05				3.000	3.000	144.0	0.474	919.5	-28.0
708	2003-12-26T12:05	165.5	1	555	9.00	1823.90				2.900	2.900	126.0
709	2003-12-26T15:12			900		1826.20	no break			3.000	3.000	116.0
709	2003-12-26T15:12	234.0	1	760	13.00	1826.20				3.000	3.000	116.0
710	2003-12-26T17:17	255.5	1	583	15.00	1828.88				2.400	2.400	120.0
711	2003-12-26T19:33	219.0	1	867	13.00	1830.94				2.300	2.300	125.0
712	2003-12-26T21:59	236.0	1	889	14.00	1833.34				2.200	2.200	128.0
713	2003-12-26T23:45	180.0	1	906	11.00	1835.06	persistent antitorque			3.200	3.200	133.0
714	2003-12-27T01:45	179.0	1	794	10.00	1837.00	persistent antitorque			3.050	3.050	137.0
715	2003-12-27T03:11			770		1838.73	persistent antitorque			3.250	3.250	140.0
715	2003-12-27T03:11	296.0	2	696	17.00	1839.82	persistent antitorque			3.250	3.250	140.0
716	2003-12-27T05:37			619		1841.00	persistent antitorque,no break			3.100	3.100	145.0
716	2003-12-27T05:37	253.0	2	781	15.00	1842.36	persistent antitorque			3.100	3.100	145.0
717	2003-12-27T07:47	249.0	1	681	14.00	1844.89				3.200	3.200	151.0
718	2003-12-27T09:55			672		1846.32	antitorque, no break			3.100	3.100	154.0	0.442	919.0	-28.0
718	2003-12-27T09:55	241.0	2	671	13.50	1847.32	Changed drill head, alignment 0.9, shoes 24 mm,16 mm			3.100	3.100	154.0	0.442	919.0	-28.0
719	2003-12-27T12:15	207.0	1	752	12.00	1849.38				3.800	3.800	126.0
720	2003-12-27T14:08	193.0	1	634	12.00	1851.43				3.700	3.700	130.0
721	2003-12-27T16:29	139.0	1	910	9.50	1853.00	Changed to Hans Tausen			1.600	1.600	135.0
FR34	2003-12-28T09:45					1854.47	Filterrun
722	2003-12-28T13:18	131.0	1	903	8.00	1854.21	Hans Tausen			3.800	3.800	139.0
723	2003-12-28T15:12	125.0	1	665	7.00	1855.42	Hans Tausen			3.900	3.900	140.0
724	2003-12-28T17:00	136.0	2	807	8.00	1856.75	Hans Tausen			3.600	3.600	143.0	0.573	915.0	-23.0
725	2003-12-28T19:05			900		1858.03	Hans Tausen, no break			4.000	4.000	116.0
725	2003-12-28T19:05			900		1858.03	Hans Tausen, no break			4.000	4.000	116.0
725	2003-12-28T19:05	124.0	1	654	8.00	1858.03	Hans Tausen			4.000	4.000	116.0
726	2003-12-28T21:30			900		1858.64	change to normal size, drill head 1			3.000	3.000	109.0
726	2003-12-28T21:30			765		1858.64	change to normal size, drill head 1			3.000	3.000	109.0
726	2003-12-28T21:30	146.5	2	696	8.00	1859.24	change to normal size, drill head 1			3.000	3.000	109.0
727	2003-12-28T23:20			882		1860.33				3.900	3.900	114.0
727	2003-12-28T23:20	172.0	2	850	9.50	1860.91				3.900	3.900	114.0
728	2003-12-29T02:08	113.0	1	689	10.00	1862.58	changed to Hans Tausen, persistent antitorque			3.400	3.400	114.0
729	2003-12-29T04:29			912		1863.81	no core break			3.500	3.500
729	2003-12-29T04:29	116.0	1	729	7.00	1863.81				3.500	3.500
730	2003-12-29T06:40			907		1864.90				2.700	2.800	118.0
730	2003-12-29T06:40			907		1864.90				2.700	2.800	118.0
730	2003-12-29T06:40			908		1864.90				2.700	2.800	118.0
730	2003-12-29T06:40	112.0	1		6.00	1864.90				2.700	2.800	118.0
731	2003-12-29T09:25			902		1865.48	no break			2.700	2.700	119.0
731	2003-12-29T09:25	71.0	1	669	6.00	1865.48				2.700	2.700	119.0
732	2003-12-29T22:04	53.0	1	528	4.00	1865.16	changed to normal drill, damage on the cutter			2.650	2.750	122.0
733	2003-12-29T23:48			969		1867.69				2.950	2.950	127.0
733	2003-12-29T23:48	202.0	1	656	14.50	1867.69				2.950	2.950	127.0
734	2003-12-30T01:25	191.0	1	847	14.00	1869.77				2.800	2.800	133.0
735	2003-12-30T02:57	235.0	1	916	13.00	1872.05				2.750	2.750	137.0
736	2003-12-30T04:29	218.0	1	579	13.00	1874.34				2.180	2.180	142.0
737	2003-12-30T06:03	272.0	1	567		1877.08				2.850	2.850	147.0
738	2003-12-30T07:40					1877.08	Drilled pulled up due to short cut					152.0	0.435	917.0	-26.1
739	2003-12-30T11:10			900		1879.34				2.800	2.800	119.0
739	2003-12-30T11:10	262.0	1	863	15.00	1879.34				2.800	2.800	119.0
740	2003-12-30T12:53	245.0	1	782	15.00	1881.71				2.800	2.800
741	2003-12-30T14:53	276.0	1	905	15.00	1884.44				2.900	2.900	129.0
742	2003-12-30T16:43	226.0	1	603	13.00	1886.71				2.700	2.700	134.0
743	2003-12-30T18:25	278.0	1	869	16.00	1889.61				2.800	2.800	138.0
744	2003-12-30T20:09	230.5	1	824	13.00	1891.91				2.800	2.800	143.0
745	2003-12-30T21:45	182.0	1	717	10.00	1893.86				2.500	2.700	149.0
746	2003-12-30T23:36	269.0	2	681	18.00	1896.48				2.650	2.650	155.0
747	2003-12-31T03:43	248.0	1	759	20.00	1898.95				2.750	2.750	160.0
748	2003-12-31T05:37	250.0	1	772	14.00	1901.64	changed spring on one cutter			2.800	2.800	166.0	0.406	917.0	-25.1
749	2003-12-31T07:50	232.0	1	901	14.00	1903.96				2.800	2.800	136.0
750	2003-12-31T09:45	91.0	1	890	8.50	1905.22	removed burr from one cutter			2.700	2.700	139.0
751	2003-12-31T11:38			903		1905.56	no core break, no cutting at 308 due to a spring in the hole?			2.600	2.750	142.0
751	2003-12-31T11:38	331.0	2	899	16.00	1907.82	no core break, no cutting at 308 due to a spring in the hole?			2.600	2.750	142.0
752	2003-12-31T13:46	260.0	1	850	14.50	1910.64				2.600	2.600	148.0
753	2003-12-31T15:32	242.0	1	579	13.00	1913.17				2.700	2.700	154.0
754	2003-12-31T17:21	258.0	1	832		1915.72				2.500	2.500	158.0	0.444	918.0	-25.2
755	2004-01-01T10:35	89.0	1	712	6.50	1916.82	change to Hans Tausen			1.700	1.700	128.0
756	2004-01-01T12:55	112.5	1	641	6.00	1918.11	HT			1.800	1.800	130.0
757	2004-01-01T15:03	121.5	2	637	5.50	1919.20	HT			1.900	1.900	134.0
758	2004-01-01T17:01			641		1919.49	HT			1.500	1.500	135.0
758	2004-01-01T17:01	85.0	2	900	5.00	1919.49	HT			1.500	1.500	135.0
759	2004-01-01T19:10	135.0	1	574	6.00	1921.28	HT			1.700	1.700	137.0
760	2004-01-01T21:29			1041		1922.36	HT, no break			2.200	2.200	143.0
760	2004-01-01T21:29	140.5	2	946	10.00	1922.36	HT			2.200	2.200	143.0
761	2004-01-02T00:09			903		1922.97	HT, no break			1.800	1.800	140.0
761	2004-01-02T00:09	44.0	1	651	4.00	1922.97	HT, one cutter damaged by the spring in the hole			1.800	1.800	140.0
762	2004-01-02T02:20	78.0	1	667	5.00	1923.81	HT, cutter damaged			1.650	1.650	151.0
763	2004-01-02T04:30	94.0	1	812	5.50	1924.77	HT			2.000	2.000	154.0	0.506	915.0	-23.5
764	2004-01-02T06:55			978		1925.61	HT, no break			1.800	1.800	119.0
764	2004-01-02T06:55			1030		1925.61	HT, no break			1.800	1.800	119.0
764	2004-01-02T06:55	112.0	1	623	6.00	1925.61	HT			1.800	1.800	119.0
FR35	2004-01-02T09:15					1925.61				0.000	0.000	0.0
FR36	2004-01-02T11:50					1925.61				0.000	0.000	0.0
FR37	2004-01-02T14:40					1925.61				0.000	0.000	0.0
765	2004-01-02T18:12			624		1924.56	HT,changed to drill head H2, new cutters			2.200	2.200	123.0
765	2004-01-02T18:12	82.0	2	831	6.00	1924.56	HT,changed to drill head H2, new cutters			2.200	2.200	123.0
FR38	2004-01-02T22:04					1924.56	HT with special hash to bring parts in the centre			0.000	0.000	0.0
766	2004-01-03T00:22			906		1927.70	HT,no break			2.600	2.600	127.0
766	2004-01-03T00:22	105.0	1	606	6.00	1927.70	HT			2.600	2.600	127.0
767	2004-01-03T03:30	101.0	1	612	7.00	1928.52	changed to long drill, no clear cutting, 14cm chips on top			1.200	1.200	129.0
768	2004-01-03T06:45			905		1928.91	changed back to HT			3.200	3.200	132.0
768	2004-01-03T06:45			678		1929.54	changed back to HT			3.200	3.200	132.0
768	2004-01-03T06:45	129.0	3	789	8.00	1929.90	changed back to HT			3.200	3.200	132.0
769	2004-01-03T09:19			542		1930.90	HT			3.000	3.000	132.0
769	2004-01-03T09:19			619		1931.21	HT			3.000	3.000	132.0
769	2004-01-03T09:19	118.0	3	705	7.00	1931.53	HT			3.000	3.000	132.0
770	2004-01-03T11:34			515		1931.56	HT			3.400	3.400	139.0
770	2004-01-03T11:34	82.0	2	906	5.00	1932.16	HT			3.400	3.400	139.0
771	2004-01-03T13:48	24.0	1	545	3.00	1932.32	HT			3.200	3.200	140.0
772	2004-01-03T15:49			605		1933.21	HT			3.000	3.000	141.0
772	2004-01-03T15:49	145.5	2	906	6.00	1933.68	HT			3.000	3.000	141.0
773	2004-01-03T22:17			834		1934.57	Change to long drill, drill head H2			1.000	1.600	148.0
773	2004-01-03T22:17	131.0	2	620	8.00	1934.61	Change to long drill, drill head H2			1.000	1.600	148.0
774	2004-01-04T13:43	7.0	1	748	6.00	1934.55						151.0	0.418	911.0	-18.9
775	2004-01-04T15:20	270.0	1	609	16.00	1937.20				2.100	2.200	152.0
776	2004-01-04T17:50	258.0	1	732	15.00	1940.08				2.300	2.200	126.0
777	2004-01-04T19:35			900		1942.16	no break			2.200	2.200	130.0
777	2004-01-04T19:35			1063		1942.16	no break			2.200	2.200	130.0
777	2004-01-04T19:35	197.0	1	1060	11.00	1942.16				2.200	2.200	130.0
778	2004-01-04T21:38	265.0	1	860	16.00	1944.86				2.100	2.100	134.0
779	2004-01-04T23:25	300.0	1	882	17.00	1947.84				2.100	2.100	129.0
780	2004-01-05T01:35	263.0	1	703	15.00	1950.42				2.600	2.600	145.0
781	2004-01-05T03:30	272.0	1	569	16.00	1953.27				2.550	2.550	150.0	0.441	915.0	-23.0
782	2004-01-05T05:28	272.0	1	745	15.00	1956.07				2.700	2.700	121.0
783	2004-01-05T07:33	241.0	1	722	14.50	1958.33				2.800	2.900	126.0
784	2004-01-05T09:27	265.0	1	723	14.50	1961.00				2.700	2.800	132.0
785	2004-01-05T11:05	264.0	1	656	14.00	1963.65				2.800	2.900	138.0
786	2004-01-05T12:55	207.0	1	824	12.00	1965.76				2.600	2.700	142.0
787	2004-01-05T14:59	265.0	1	907	16.00	1968.44	changed to drill head H3 (Rufli)			2.600	2.600	146.0
788	2004-01-05T16:45	236.0	1	677	11.50	1970.75				3.900	3.900	151.0
789	2004-01-05T18:46	235.0	1	834	14.00	1972.94				3.000	3.000	156.0	0.510	914.0	-21.5
790	2004-01-05T20:40	277.0	1	897	15.00	1975.63				2.800	2.800	147.0
791	2004-01-05T22:35	244.0	1	903	14.50	1978.20				2.900	2.900	128.0
792	2004-01-06T00:43	256.0	1	908	16.00	1980.73				3.100	3.100	132.0
793	2004-01-06T03:05	280.0	1	903	17.00	1983.65				3.200	3.200	136.0
794	2004-01-06T05:18	283.0	1	910	16.50	1986.46				2.890	2.890	140.0
795	2004-01-06T07:18	271.0	1	798	15.00	1989.29				3.100	3.100	145.0
796	2004-01-06T09:16	262.0	1	795	15.00	1991.85				3.300	3.300	150.0
797	2004-01-06T11:07			903		1994.46	no break			3.100	3.100	154.0
797	2004-01-06T11:07	260.0	1	675	15.00	1994.46				3.100	3.100	154.0
798	2004-01-06T13:20					1994.46	Run aborted,broken incremental counter			3.100	3.100	154.0	0.398	915.0	-22.4
799	2004-01-06T21:25	270.0	1	899	15.00	1996.63				2.800	2.800	131.0
800	2004-01-06T23:18	253.0	1	903	15.00	1999.25				3.100	3.100	135.0
801	2004-01-07T01:17	170.0	1	553	10.00	2001.38				3.300	3.300	142.0
802	2004-01-07T03:32	7.0	1	777		2001.50	persistent cutting problems, plastic found around the drillhead					144.0
803	2004-01-07T06:02	61.0	1	787	4.50	2002.30	persistent cutting problems, plastic found around the drillhead			2.400	2.400	145.0
804	2004-01-07T08:17	270.0	1	582	15.00	2004.75				3.250	3.250	148.0
805	2004-01-07T10:09	209.0	1	609	12.00	2007.01				3.200	3.200	154.0
806	2004-01-07T12:31	231.0	1	683	13.00	2009.23				3.500	3.500	159.0	0.450	911.0	-18.7
807	2004-01-07T14:20	268.0	1	676	15.00	2011.84				3.100	3.100	127.0
808	2004-01-07T16:15	285.5	1	666	16.00	2014.62				3.200	3.200	133.0
809	2004-01-07T18:13			900		2017.22	no break			3.200	3.200	137.0
809	2004-01-07T18:13	241.0	1	424	13.00	2017.22				3.200	3.200	137.0
810	2004-01-07T20:12	174.0	1	627	10.00	2019.09				3.300	3.600	142.0
811	2004-01-07T22:10			900		2021.68				3.200	3.200	146.0
811	2004-01-07T22:10	274.0	1	530	14.00	2021.68				3.200	3.200	146.0	0.533	915.0	-23.0
812	2004-01-08T00:01	220.0	1	768	14.00	2024.16				3.300	3.300
813	2004-01-08T02:13	303.0	1	826	17.00	2027.04				2.600	2.600	116.0
814	2004-01-08T04:10	305.0	2	683	16.00	2030.16				2.600	2.600	122.0
815	2004-01-08T06:17	250.0	1	687	15.00	2032.66				2.100	2.100	126.0
816	2004-01-08T08:28	243.0	1	734	13.50	2035.04				2.300	2.300	133.0
817	2004-01-08T10:26	273.5	1	663	14.50	2037.74				2.100	2.100	136.0
818	2004-01-08T12:20	278.0	1	593	15.00	2040.44				2.100	2.100	140.0
819	2004-01-08T14:02			911		2043.33	no break			2.100	2.100	145.0
819	2004-01-08T14:02	282.0	1	472	16.00	2043.33	Tower motor broken.			2.100	2.100	145.0
820	2004-01-08T20:00	303.0	1	846	18.00	2045.93				2.500	2.500	105.0	0.533	915.0	-23.0
821	2004-01-08T22:10	67.0	1	911	5.50	2047.23				2.400	2.400	111.0
822	2004-01-09T00:10	272.0	1	797	15.00	2049.82	persistent cutting problems			2.200	2.200	113.0
823	2004-01-09T03:00	298.0	1	762	16.00	2052.88				2.350	2.350	123.0
824	2004-01-09T05:35	232.0	1	676	12.00	2055.26				2.250	2.250	127.0
825	2004-01-09T08:01		1	901		2057.07	no break			2.500	2.500	132.0
825	2004-01-09T08:01			1043		2057.07				2.500	2.500	132.0
825	2004-01-09T08:01	207.0	1	900	12.00	2057.07				2.500	2.500	132.0
826	2004-01-09T10:50	209.0	1	637	12.00	2059.05				2.700	2.800	137.0
827	2004-01-09T12:36	232.0	1	693	14.00	2061.59				2.600	2.600	141.0	0.421	917.0	-25.5
828	2004-01-09T14:30	249.0	1	806	14.00	2063.88	all cutters and catchers sharpened			2.800	2.800	120.0
829	2004-01-09T16:30	238.5	1	634	14.00	2066.44				2.900	2.900	120.0
830	2004-01-09T18:45	254.0	1	746	15.00	2068.81				2.900	2.900	125.0
831	2004-01-09T20:50	253.0	1	688	14.00	2071.54				2.900	2.900	130.0
832	2004-01-09T22:35	272.0	1	765	18.50	2073.85				2.700	2.700	133.0
833	2004-01-10T00:30	256.0	2	647	14.00	2076.86				2.600	2.600	137.0
834	2004-01-10T02:20	257.0	1	626	14.50	2079.65				2.700	2.700	142.0	0.462	916.0	-24.4
835	2004-01-10T04:14	280.0	1	555	16.00	2082.38				2.600	2.600	148.0
836	2004-01-10T06:07	271.0	1	685	14.50	2085.07				2.600	2.600	118.0
837	2004-01-10T07:51	261.0	1	643	15.50	2087.62				2.700	2.700	122.0
838	2004-01-10T09:56	288.0	1	634	16.00	2090.36				2.800	2.800	126.0
839	2004-01-10T11:52			900		2093.09	no break			2.800	2.800	132.0
839	2004-01-10T11:52	264.0	1	680	16.00	2093.09				2.800	2.800	132.0
840	2004-01-10T13:55			935		2095.13	no break			2.800	2.800	137.0
840	2004-01-10T13:55	262.0	1	565	15.00	2095.13				2.800	2.800	137.0
841	2004-01-10T15:45	277.0	1	899	15.00	2098.38				2.700	2.700	142.0
842	2004-01-10T17:40	265.0	1	649	15.00	2101.05				2.600	2.600	143.0	0.436	917.0	-25.0
FR38	2004-01-11T02:30					2101.61	1-2kg slush
843	2004-01-11T13:05	234.0	1	598	16.00	2103.20	change shaft			2.800	2.800
844	2004-01-11T15:00	170.0	1	691	9.00	2105.10				2.700	2.700	124.0
845	2004-01-11T16:45		2	623		2106.57	due to high motor current early break			2.800	2.800	127.0
845	2004-01-11T16:45	229.0	2	954	14.00	2106.78				2.800	2.800	127.0
846	2004-01-11T18:55	313.0	1	642	17.00	2110.10				2.500	2.500	134.0
847	2004-01-11T21:22	280.0	2	842	16.00	2113.41				2.700	2.700	136.0
848	2004-01-11T23:28	265.0	1	864	15.50	2115.87				2.600	2.600	142.0
849	2004-01-12T01:50	278.0	1	1049	16.00	2118.74				2.600	2.600	147.0	0.270	917.0	-25.0
850	2004-01-12T04:09			900		2121.46	no break			2.500	2.500	142.0
850	2004-01-12T04:09	262.0	1	637	15.00	2121.46				2.500	2.500	142.0
851	2004-01-12T07:06			905		2123.80	no break			3.000	3.000	130.0
851	2004-01-12T07:06	251.0	1	620	16.00	2123.80				3.000	3.000	130.0
852	2004-01-12T09:20	253.0	1	652	14.00	2126.54				2.850	2.850	135.0
853	2004-01-12T11:22	212.0	1	617	13.00	2128.63				3.400	3.400	139.0
854	2004-01-12T13:45	217.0	1	690	12.00	2130.72				3.300	3.600	145.0
855	2004-01-12T15:45	213.0	1	694	14.00	2133.15				2.600	2.800	151.0	0.418	917.0	-24.0
856	2004-01-12T18:05			950		2135.36	no break			2.400	2.600	151.0
856	2004-01-12T18:05			1044		2135.36	no break			2.400	2.600	151.0
856	2004-01-12T18:05			1081		2135.36	no break			2.400	2.600	151.0
856	2004-01-12T18:05	253.0	1	1208	14.50	2135.36	bottom break,persistent antitorque,both legs of one spring gone, magnetic replaced			2.400	2.600	151.0
857	2004-01-12T20:27	265.0	1	855	16.00	2137.88				2.900	3.000	127.0
858	2004-01-12T22:35		2	625		2139.18	break and down again			2.000	2.100	132.0
858	2004-01-12T22:35	210.0	2	807	13.00	2140.08				2.000	2.100	132.0
859	2004-01-13T01:10	231.5	1	695	13.00	2142.57				2.700	2.700	138.0
860	2004-01-13T03:12			900		2144.61	no break			2.500	2.500	142.0
860	2004-01-13T03:12			900		2144.61	no break			2.500	2.500	142.0
860	2004-01-13T03:12			1080		2144.61	no break			2.500	2.500	142.0
860	2004-01-13T03:12	205.0	1	1060	12.50	2144.61	no break			2.500	2.500	142.0
861	2004-01-13T06:23		2	796		2145.33	break because of cutting problems			1.700	2.400	145.0
861	2004-01-13T06:23	79.0	2	564	5.00	2145.33				1.700	2.400	145.0
862	2004-01-13T08:28	182.0	1	968	11.00	2147.31				1.800	2.000	150.0	0.460	916.0	-24.0
FR39	2004-01-13T10:45					2147.27	changed to drill head H2					133.0
863	2004-01-13T13:32	205.0	1	782	13.00	2148.94				2.600	2.800	124.0
864	2004-01-13T15:50	277.0	1	1005	16.00	2151.90				2.800	2.800	126.0
865	2004-01-13T17:55	260.0	1	603	15.50	2154.58				2.800	2.800	129.0
866	2004-01-13T19:55	266.0	1	823	16.00	2157.10				2.800	2.800	136.0
867	2004-01-13T21:45	266.5	1	956	16.00	2159.92				2.700	2.700	139.0
868	2004-01-13T23:49	229.5	1	577	13.00	2162.41				2.500	2.500	146.0
869	2004-01-14T02:22	274.0	1	1061	16.00	2164.86				2.500	2.500	150.0	0.390	917.5	-26.0
870	2004-01-14T04:33	255.0	1	620	14.50	2167.60				2.600	2.600	126.0
871	2004-01-14T06:44	173.0	1	951	12.00	2169.24				2.700	2.700	131.0
872	2004-01-14T08:36	238.0	1	656	15.00	2171.52				2.900	2.900	132.0
873	2004-01-14T10:55	228.0	1	751	15.00	2174.44				3.000	3.000	139.0
874	2004-01-14T12:55	213.0	2	639	10.00	2175.96				2.400	2.500	146.0
875	2004-01-14T15:00	274.0	1	728	14.00	2178.84				2.400	2.400	150.0	0.428	916.0	-25.0
876	2004-01-14T17:10		3	607	15.00	2181.31	break due to cutting problems			2.300	2.300	122.0
876	2004-01-14T17:10	262.0	3	943	15.00	2181.31				2.300	2.300	122.0
877	2004-01-14T19:40	246.0	1	631	14.00	2183.70				2.500	2.500	126.0
878	2004-01-14T21:25	268.0	1	659	15.00	2186.61				2.000	2.100	130.0
879	2004-01-14T23:32	266.0	1	686	14.50	2189.36				2.100	2.100	136.0
880	2004-01-15T01:44	272.0	1	611	15.50	2192.11	changed drill head H1			2.100	2.100	141.0	0.434	918.6	-27.0
881	2004-01-15T04:04	279.0	1	642	15.50	2194.81				3.700	3.700	145.0
882	2004-01-15T06:29	272.0	1	712	15.00	2197.57				3.000	3.000	117.0
883	2004-01-15T08:35	248.0	1	665	14.00	2200.04				2.700	2.700	119.0
884	2004-01-15T10:40	276.0	4	619	16.00	2202.72				2.650	2.650	126.0
885	2004-01-15T12:50	228.0	1	637	13.00	2205.19				2.700	2.700	131.0
886	2004-01-15T14:59	277.5	1	682	15.00	2207.79				2.300	2.600	136.0
887	2004-01-15T17:00	261.0	1	881	15.00	2210.48				2.600	2.600	141.0
888	2004-01-15T18:50	286.0	1	778	16.00	2213.26				2.100	2.100	142.0	0.499	912.0	-20.0
889	2004-01-15T21:01	273.0	1	924	16.00	2215.97				1.900	1.900	115.0
890	2004-01-15T23:02	276.0	1	704	15.00	2218.74				2.400	2.400	121.0
891	2004-01-16T01:08	278.0	1	674	15.00	2221.53				2.900	2.900	125.0
892	2004-01-16T03:18	227.0	1	671	13.00	2223.69				3.400	3.400	129.0
893	2004-01-16T05:21	255.0	1	821	14.00	2226.48				3.400	3.400	135.0
894	2004-01-16T07:26	272.0	1	699	17.00	2229.14				3.200	3.400	140.0
895	2004-01-16T09:30	261.0	1	920	14.00	2231.91				3.100	3.100	145.0
896	2004-01-16T11:20	258.0	1	782	15.00	2234.48				3.100	3.100	150.0
897	2004-01-16T13:20	275.0	1	728	16.00	2237.21				2.900	2.900	156.0	0.375	917.0	-25.0
898	2004-01-16T15:23	248.0	1	627	12.00	2239.80				2.900	2.900	160.0
899	2004-01-16T17:14	236.0	1	759	13.00	2242.01				2.900	2.900	130.0
900	2004-01-16T19:36	265.0	1	748	15.00	2244.61				3.000	3.000	140.0
901	2004-01-16T21:35	247.0	1	613	14.00	2247.26				2.900	2.900	146.0
902	2004-01-16T23:33	259.0	1	969	14.00	2249.90				3.000	3.000	151.0	0.428	917.0	-26.0
903	2004-01-17T02:18	201.0	1	1042	12.00	2251.64				3.400	3.400	158.0
904	2004-01-17T04:35	123.0	1	778	7.00	2253.16				3.100	3.100	128.0
905	2004-01-17T06:42	150.0	1	682	9.00	2254.54	New Drill Head			3.100	3.100	133.0
906	2004-01-17T08:40		0			2254.54	Short Cut in electronics, spring released
907	2004-01-17T11:26	132.0	1	1039	8.00	2255.83				3.500	3.500	135.0
908	2004-01-17T13:31	163.5	1	664	8.00	2257.40	cutting problems, new inclinometer settings			2.300	2.400	139.0
909	2004-01-17T15:39	173.0	1	693	10.00	2259.07	cutting problems due to no voltage in the drill			2.400	2.400	145.0
910	2004-01-18T13:06	290.0	1	687	17.00	2261.89				2.500	2.500	148.0
911	2004-01-18T15:15	246.0	1	710	13.00	2264.52				2.700	2.700	154.0	0.508	917.0	-25.0
912	2004-01-18T17:08	230.0	1	1055	13.50	2266.91				2.300	2.300	143.0
913	2004-01-18T20:00	142.0	2	1085	8.00	2267.73				1.000	1.900	124.0
914	2004-01-18T22:13	196.0	1	721	11.00	2270.26				2.400	2.900	126.0
915	2004-01-19T00:26	212.0	1	715	12.00	2272.29	changed shaft			2.750	2.750	131.0
916	2004-01-19T03:03	247.0	1	1124	14.00	2274.86				2.400	2.700	135.0
917	2004-01-19T05:23	277.0	1	1065	15.00	2277.63				2.700	2.700	140.0
918	2004-01-19T07:52	270.0	1	958	16.00	2280.63				2.600	2.600	146.0	0.480	915.0	-23.5
919	2004-01-19T10:00	199.0	1	646	13.00	2282.49				2.650	2.650	125.0
920	2004-01-19T11:55	274.0	1	1109	16.00	2285.06				2.700	2.700	119.0
921	2004-01-19T14:08	259.0	1	1036	15.00	2287.79				2.800	2.800	124.0
922	2004-01-19T16:13	289.0	1	599	16.00	2290.52				2.650	2.800	128.0
923	2004-01-19T18:20	243.0	1	994	14.00	2292.91				2.800	2.800	134.0
924	2004-01-19T20:22	279.0	1	882	16.00	2295.71				2.800	2.800	139.0
925	2004-01-19T22:59	278.0	1	712	14.00	2295.83				3.400	3.400
926	2004-01-20T01:46	278.0	1	956	16.00	2301.36				2.700	2.700	149.0	0.465	918.0	-26.5
927	2004-01-20T03:59	283.0	1	843	15.50	2304.28				2.600	2.600	119.0
928	2004-01-20T06:15	217.0	1	1011	14.00	2306.41				2.200	2.200	123.0
929	2004-01-20T08:30	172.0	1	868	10.00	2308.05				2.700	2.700	129.0
930	2004-01-20T11:10	266.0	1	685	14.50	2311.01				2.900	3.000	132.0
931	2004-01-20T14:12	213.0	1	1037	12.00	2313.07				2.600	2.900	137.0
932	2004-01-20T16:50	256.0	1	1131	15.00	2315.18				2.300	2.400	144.0
933	2004-01-20T18:50	99.0	2	836	7.00	2316.47				1.000	2.600	148.0
934	2004-01-20T21:07	267.0	1	865	14.50	2319.19				2.300	2.500	120.0	0.421	917.0	-25.7
935	2004-01-20T23:27	269.0	1	1017	15.00	2321.84				2.300	2.300	125.0
936	2004-01-21T01:45	41.0	1	1029		2322.31	screw from valve was blocked, changed shaft			2.500	2.500	128.0
937	2004-01-21T03:44	206.0	1	823	14.00	2324.36	change to H1			2.300	2.300	134.0
938	2004-01-21T06:03	173.0	1	788	11.00	2325.97				3.500	3.500	138.0
939	2004-01-21T08:08	233.0	1	880	14.00	2328.28				3.000	3.000	142.0
940	2004-01-21T10:25	254.0	1	875	14.00	2330.87				3.000	3.000	148.0	0.396	918.6	-27.0
941	2004-01-21T12:20	260.0	1	667	15.00	2333.36				3.200	3.200	121.0
942	2004-01-21T14:23	271.0	1	679	14.50	2336.06				3.000	3.200	126.0
943	2004-01-21T16:30	259.0	1	770	15.00	2338.55				3.200	3.200	129.0
944	2004-01-21T18:28	249.0	1	709	14.00	2340.90				3.200	3.200	134.5
945	2004-01-21T20:34			1200		2343.43	no break			2.900	3.400	139.0
945	2004-01-21T20:34	253.0	1	740	15.00	2343.43	changed core catcher springs			2.900	3.400	139.0
946	2004-01-21T23:03	218.0	1	728	12.00	2345.83				3.200	3.200	145.0	0.486	917.0	-25.5
947	2004-01-22T01:13	249.0	1	712	14.00	2348.43				3.400	3.400
948	2004-01-22T03:30	209.0	1	1335	11.00	2350.46				3.400	3.400	119.0
949	2004-01-22T06:14	136.0	1	1092	5.00	2352.11		persistent communication problems		2.400	2.600	123.0
950	2004-01-22T08:15		2	954		2353.58	break due to high current	persistent communication problems		3.200	3.200	129.0
950	2004-01-22T08:15	179.0	2	1204	15.00	2353.96		persistent communication problems		3.200	3.200	129.0
951	2004-01-22T11:38	200.0	1	1200	11.00	2355.62	cleaned sliping/ changed to two new core catchers	persistent communication problems		2.300	2.500	133.0
952	2004-01-22T14:10	236.0	1	1137	14.00	2358.08		persistent communication problems		2.500	2.500	138.0
953	2004-01-22T16:24	221.0	1	1035	13.00	2360.23	changed to 3 core catchers	persistent communication problems		2.400	2.700	144.0	0.530	916.0	-25.5
954	2004-01-22T19:36	166.0	1	834	9.00	2361.62		persistent communication problems		2.900	2.900	116.0
955	2004-01-22T21:37	197.0	1	1061	11.00	2363.98		persistent communication problems		2.800	2.800	115.0
956	2004-01-23T00:37	226.0	1	728	13.00	2365.95		persistent communication problems		2.750	2.750
957	2004-01-23T03:00	221.0	1	687	12.50	2368.49	changed to drillhead H2	persistent communication problems		2.600	2.600	123.0
958	2004-01-23T05:19		1	740		2369.66	pull up due to closing window	persistent communication problems		3.500	3.600	128.0
958	2004-01-23T05:19	135.0	1	983	7.00	2369.66	tried to reduce pitch	persistent communication problems		3.500	3.600	128.0
959	2004-01-23T07:41	187.0	1	896	14.00	2371.68	add shin under the cutter	persistent communication problems		3.200	3.100	133.0
960	2004-01-23T09:50		1	789		2372.57	core break due to high current	persistent communication problems		2.100	2.100	138.0
960	2004-01-23T09:50	163.0	1	766	10.00	2373.50	changed to H1	persistent communication problems		2.100	2.100	138.0
961	2004-01-23T12:20	135.0	1	686	11.00	2374.66		persistent communication problems		2.400	2.400	141.0
962	2004-01-23T14:55		1			2374.66	no rotation, pump stocked	persistent communication problems				147.0	0.476	917.0	-25.3
963	2004-01-23T16:45	220.0	1	955	14.00	2376.87		persistent communication problems		2.300	2.100	141.0
964	2004-01-23T18:54		2	1200		2377.81	no break, pull up due to high current	persistent communication problems		1.800	1.800	120.0
964	2004-01-23T18:54		2	715		2377.81	pull up due to high current	persistent communication problems		1.800	1.800	120.0
964	2004-01-23T18:54	102.0	2	719	6.00	2377.70	changed to H2	persistent communication problems		1.800	1.800	120.0
965	2004-01-23T21:30	173.0	1	690	9.00	2379.66		persistent communication problems		2.100	2.100	124.0
966	2004-01-23T23:39	111.0	1	686	9.00	2379.90	stopped due to high current	persistent communication problems		2.050	2.050	129.0
967	2004-01-24T02:08	152.0	1	1201	8.00	2382.14		persistent communication problems		2.900	2.900	131.0
968	2004-01-24T04:25	167.0	1	692	9.00	2384.16		persistent communication problems		2.800	2.800	136.0
969	2004-01-24T06:29	181.0	1	1000	11.00	2385.73		persistent communication problems		2.600	2.700	140.0
970	2004-01-24T08:35	195.0	1	698	11.00	2387.91		persistent communication problems		2.700	2.700	144.0	0.413	920.0	-29.0
971	2004-01-24T10:40	188.0	1	947	11.00	2389.81		persistent communication problems		2.600	2.700	119.0
972	2004-01-24T12:45	193.0	1	1197	10.00	2391.63		persistent communication problems		3.100	3.100	123.0
973	2004-01-24T14:55	170.0	1	793	10.00	2393.31	stopped due to high current	persistent communication problems		3.200	3.200	128.0
974	2004-01-24T17:00	163.0	1	998	10.00	2394.95	stopped due to high current	persistent communication problems		3.200	3.400	131.0
FR40	2004-01-25T01:40					2394.95	clean hole					134.0
FR41	2004-01-25T03:00					2394.95	logging,new brass tube,new contact in the antitorque section
975	2004-01-25T14:14	103.0	1	845	7.00	2395.44				4.200	4.200	136.0
976	2004-01-25T16:30	99.0	1	1190	6.50	2397.06				2.000	2.000	141.0
977	2004-01-25T18:56	216.0	1	1140	11.00	2398.92				3.000	3.000	147.0	0.484	916.0	-24.6
978	2004-01-25T21:05	86.0	1	806	6.00	2400.18		persistent communication problems		2.200	2.200	114.0
979	2004-01-25T23:30	128.0	1	753	7.50	2401.08		persistent communication problems		3.000	3.000	117.0
980	2004-01-26T01:32	154.0	1	777	9.00	2402.88	problems with the control of the motor	persistent communication problems		3.100	3.100	122.0
981	2004-01-26T03:59	47.0	1	799	3.50	2403.62	problems with the control of the motor	persistent communication problems		2.600	2.600	127.0
982	2004-01-26T06:48	81.0	1	1008	5.00	2404.27	problems with the control of the motor			2.700	2.800	130.0
983	2004-01-26T09:20	46.0	1	738	4.00	2404.80	problems with the control of the motor	persistent communication problems		2.000	2.000	135.0
984	2004-01-26T11:18	117.0	1	769	7.00	2405.87	changed core barrel, problems with the control of the barrel	persistent communication problems, changed to old electronics		2.900	2.900	140.0
985	2004-01-26T14:25	153.0	1	720	10.00	2407.17		occasional communication problems		1.900	1.900	143.0	0.242	918.6	-27.0
986	2004-01-26T16:25	176.0	1	832	11.00	2408.99		occasional communication problems		1.900	1.900	111.0
987	2004-01-26T18:40		2	1206		2410.39	pulled due to high pump current	occasional communication problems		1.800	1.900	115.0
987	2004-01-26T18:40	166.0	2	1036	10.00	2410.39		occasional communication problems		1.800	1.900	115.0
988	2004-01-26T21:15	35.0	1	909	2.00	2411.77	cutting problem			2.400	2.400	121.0
989	2004-01-26T23:44	137.0	1	717	8.00	2412.50	changed drill head			2.400	2.400	123.0
990	2004-01-27T02:03	270.0	1	647	14.00	2415.31				2.800	2.800	128.0
991	2004-01-27T04:22	140.0	1	1049	8.00	2416.73				2.400	2.600	132.0
992	2004-01-27T06:30	169.0	1	1006	10.00	2418.38				2.700	2.800	140.0
993	2004-01-27T08:33	290.0	1	715	18.00	2421.26				2.600	2.600	141.0
994	2004-01-27T10:46		2	752		2422.46	break due to instable cutting, instable idle current			2.800	2.800	147.0
994	2004-01-27T10:46	120.0	2	762		2422.46	instable cutting, instable idle current			2.800	2.800	147.0	0.495	920.0	-27.0
995	2004-01-27T12:53	260.0	1	675	16.00	2424.93				2.100	2.400	147.0
996	2004-01-27T15:05	243.0	1	748	13.00	2427.27				2.600	3.000	119.0
997	2004-01-27T17:06	93.0	1	731		2428.44				2.800	2.800	123.0
998	2004-01-27T19:20	156.0	1	863	13.00	2429.95				2.600	2.600	128.0
999	2004-01-27T21:15	202.0	1	1137	12.00	2432.13				1.800	2.600	131.0
1000	2004-01-27T23:26	166.0	1	1105	10.00	2433.74				2.650	2.650	134.0
1001	2004-01-28T01:42	138.0	1	1078	8.00	2435.18				2.550	2.550	140.0
1002	2004-01-28T03:48	167.0	1	735	9.00	2436.76				2.600	2.600	146.0
1003	2004-01-28T05:59			1200		2437.97	no break			2.000	2.000	150.0
1003	2004-01-28T05:59	118.0	1	634	7.00	2437.97				2.000	2.000	150.0	0.453	921.0	-30.0
1004	2004-01-28T08:05		2	652	10.00	2439.20	break due to high cutting current			2.000	2.000	120.0
1004	2004-01-28T08:05	136.0	2	652	10.00	2439.20	high idle current, changed drill head			2.000	2.000	120.0
1005	2004-01-28T10:27			1204		2440.45	break due to high pumping current, no break			3.400	3.400	125.0
1005	2004-01-28T10:27			872	7.00	2440.45	break due to high pumping current			3.400	3.400	125.0
1005	2004-01-28T10:27	136.0	3	752	7.00	2440.45				3.400	3.400	125.0
1006	2004-01-28T12:55	168.0	1	1054	10.00	2442.24				3.100	3.400	129.0
1007	2004-01-28T15:25	213.0	1	834	12.00	2444.31				2.200	2.800	133.0
1008	2004-01-28T17:47	276.0	1	650	16.00	2447.05				2.400	2.500	137.0
1009	2004-01-28T20:12	278.0	1	658	15.00	2449.67				2.400	2.400	144.0
1010	2004-01-28T22:32	107.0	1	1120	4.00	2451.33				2.800	2.800	150.0	0.373	920.0	-28.3
1011	2004-01-29T01:09	141.0	1	986	7.50	2452.70	changed to H2			2.700	2.700	124.0
1012	2004-01-29T03:24	250.0	1	673	14.50	2455.10				2.400	2.400	127.0
1013	2004-01-29T05:35	256.0	1	823	14.00	2457.67				2.400	2.400	133.0
1014	2004-01-29T07:50	263.0	1	1021	17.00	2460.37				2.300	2.300	136.0
1015	2004-01-29T10:30	139.0	1	1105	8.00	2461.70				2.200	2.200	142.0	0.470	921.0	-30.0
1016	2004-01-29T12:52	268.0	1	1207	15.50	2464.40				2.400	2.500	112.0
1017	2004-01-29T15:15	267.0	1	1154	15.00	2466.88				2.700	2.700	119.0
1018	2004-01-29T17:25	274.0	1	642	15.00	2469.66				2.300	2.400	122.0
1019	2004-01-29T19:51	148.0	1	764	8.50	2471.26				2.200	2.300	129.0
1020	2004-01-29T22:12			1200		2473.23	no break			3.500	3.500	133.0
1020	2004-01-29T22:12	198.0	1	745	12.00	2473.23	piece of core catcher missing			3.500	3.500	133.0
1021	2004-01-30T01:14	248.0	1	1147	14.50	2475.77				2.800	2.800	136.0
1022	2004-01-30T04:02	60.0	1	684	4.00	2476.49	one cutter damaged			2.200	2.200	140.0	0.497	922.0	-31.0
FR42	2004-01-30T06:09					2476.49	spring found and up again, switched to H2
1023	2004-01-30T09:55	278.0	1	851	16.00	2478.76				3.400	3.400	114.0
1024	2004-01-30T12:15	64.0	1	1208	4.00	2479.99	antitorque, break diue to high current			3.400	3.400	114.0
1025	2004-01-30T14:47	111.0	1	763	6.00	2481.03	chips under the shoes			3.200	3.400	119.0
1026	2004-01-30T17:03	121.0	1	956	8.00	2482.20				2.600	2.600	123.0
1027	2004-01-30T19:30	235.0	1	760		2484.28				2.200	2.400	129.0
1028	2004-01-30T22:07	256.0	1	687	15.00	2486.80				2.300	2.400	133.0
1029	2004-01-31T00:38			1200		2488.28	no break			2.600	2.600	129.0
1029	2004-01-31T00:38	122.0	1	924	7.00	2488.28	cutting problems			2.600	2.600	139.0
1030	2004-01-31T03:00	112.0	1	1204	6.00	2489.17	high idle current			2.400	2.400	143.0	0.367	922.0	-30.8
1031	2004-01-31T05:19	134.0	1	730	8.00	2490.86				2.500	2.500	122.0
1032	2004-01-31T07:29	150.0	1	963	11.00	2492.10	changed to H2			2.100	2.100	126.0
1033	2004-01-31T09:40	248.0	1	1208	15.00	2494.50				3.100	3.100	132.0
1034	2004-01-31T11:58	240.0	1	661	13.00	2497.09				3.100	3.100	135.0	0.336	920.0	-29.0
1035	2004-01-31T14:15	113.0	1	1029	7.00	2498.14				2.800	3.100	112.0
1036	2004-01-31T16:35	255.0	1	1141	14.00	2500.48				3.150	3.100	118.0
FR43	2004-02-01T04:30				1.00	2500.48	changed to shaft with Danish pump
1037	2004-02-01T13:10	205.0	1	1191	15.00	2502.40				3.000	3.000	121.0
1038	2004-02-01T15:35	200.0	1	742	12.00	2504.63				3.100	3.100	130.0
1039	2004-02-01T17:35	119.0	1	1157	7.00	2505.72				3.100	3.100	133.0
1040	2004-02-01T20:05	134.0	1	1141	7.00	2507.30				2.000	2.000	139.0
1041	2004-02-01T22:32			760		2507.77	antitorque and short rotation			2.200	2.200	144.0
1041	2004-02-01T22:32	40.0	2	1058		2507.94				2.200	2.200	144.0
1042	2004-02-02T01:01	69.0	1	1180	6.00	2508.52	changed to H1			1.650	1.650	147.0	0.547	921.0	-28.5
1043	2004-02-02T03:03	102.0	1	768	6.00	2509.52	due to high current			2.700	2.700	126.0
1044	2004-02-02T05:02	112.0	1	1204	6.00	2510.48	due to high current			2.800	2.800	117.0
1045	2004-02-02T07:30		1	1204		2512.26	no break			3.100	3.100	120.0
1045	2004-02-02T07:30	166.0	1	650	9.00	2512.26	One spring broken			3.100	3.100	120.0
1046	2004-02-02T09:45	181.0	1	1112	13.00	2514.07				2.900	2.900	125.0
1047	2004-02-02T12:28	205.0	1	1204	12.00	2516.12				3.100	3.100	129.0
1048	2004-02-02T14:45	169.0	1	1072	10.00	2517.91				3.100	3.100	133.0
1049	2004-02-02T17:10	178.0	1	1142	9.00	2519.64				2.800	2.900	140.0
1050	2004-02-02T19:41	259.0	1	1023	14.50	2522.06				3.000	3.000	146.0	0.395	918.0	-27.0
1051	2004-02-02T22:15	221.0	1	822	12.00	2524.42				3.100	3.100	119.0
1052	2004-02-03T00:41	187.0	1	975	10.00	2526.11				3.000	3.000	123.0
1053	2004-02-03T03:02		1	1210		2528.87	no break			3.100	3.200	130.0
1053	2004-02-03T03:02	254.0	1	1207	15.00	2528.87				3.100	3.200	130.0
1054	2004-02-03T06:05	133.0	1	1189	7.00	2530.37				3.300	3.300	134.0
1055	2004-02-03T08:15		1	1206		2530.37	no break			1.200	1.200	138.0
1055	2004-02-03T08:15	15.0	1	1252	3.00	2530.37	cutting problems			1.200	1.200	138.0
1056	2004-02-03T11:23	115.0	1	1243		2531.33				2.300	2.500	141.0	0.430	922.0	-30.5
1057	2004-02-03T13:16	27.0	1	1003		2531.90	cutting problems			3.700	3.700
1058	2004-02-03T15:52		1	1250		2532.20	no break			2.550	2.550
1058	2004-02-03T15:52	38.0	1	1304	6.00	2532.20	cutting problems			2.550	2.550
1059	2004-02-03T18:38	47.0	1	1095	3.00	2532.63	cutting problems			1.300	1.300	122.0
1060	2004-02-03T21:00	56.0	1	1023	3.00	2533.50				1.200	1.200	127.0
1061	2004-02-03T23:26	155.0	1	1282	8.50	2534.79				1.550	1.550	133.0
1062	2004-02-04T01:55	175.0	1	824	10.00	2536.53				3.100	3.100	136.0
1063	2004-02-04T04:22	88.0	1	1201	5.00	2537.35				3.200	3.200	140.0
1064	2004-02-04T06:44					2537.35	no cutting after various trials						0.520	921.4	-30.0
1065	2004-02-04T09:28	13.0	1	1128	3.50	2537.26	high cutting current, no rotation			3.800	3.800	106.0
1066	2004-02-04T11:56	71.0	1	893	3.50	2538.58	changed to Hans Taussen			2.700	3.700	110.0
1067	2004-02-04T14:42	129.0	1	913	6.00	2539.36				2.700	2.500	112.0
1068	2004-02-04T17:00	86.0	1	934	6.00	2540.56				2.700	2.700	115.0
1069	2004-02-04T19:35					2540.56	stoped due to cutting problems, no core in the barrel for unknown reasons, supposed break was at 500 kg					117.0
1070	2004-02-04T21:54	110.0	1	868	4.00	2541.56				2.700	2.700	118.0
1071	2004-02-05T00:38	122.0	1	938	5.50	2542.82				3.100	3.100	120.0
1072	2004-02-05T02:53	48.0	1	1358	3.00	2543.45	changed springs and unmounted screw of lower coupling			3.000	3.000	122.0
1073	2004-02-05T05:20	67.0	1	1332	4.00	2544.26	persistent cutting problems			3.000	3.000	124.0
1074	2004-02-05T08:00	53.0	1	1294	4.00	2545.04				2.700	2.800	128.0
1075	2004-02-05T10:27	85.0	1	1024	5.00	2545.51	changed electronics, back to HT			2.900	2.700	131.0
FR44	2004-02-05T13:46					2545.51	spoooled cable out to repare winch, doesnt work
1076	2004-02-05T17:48		1	1304		2546.06	no break, short rotation			2.800	2.800	133.0
1076	2004-02-05T17:48		1	1324		2546.06	no break, short rotation			2.800	2.800	133.0
1076	2004-02-05T17:48		1	1462		2546.06	no break, short rotation			2.800	2.800	133.0
1076	2004-02-05T17:48		1	1620		2546.06	no break, short rotation			2.800	2.800	133.0
1076	2004-02-05T17:48	62.0	1	1606	4.50	2546.06	rotation under load			2.800	2.800	133.0
1077	2004-02-05T21:30	92.0	1	1120	6.00	2547.24				2.800	2.800	137.0
1078	2004-02-06T00:37	32.0	1	1209		2547.72				2.700	2.700	138.0
1079	2004-02-06T02:55	87.0	1	1103	7.00	2548.63				2.700	2.700	139.0
1080	2004-02-06T05:07	60.0	1	1172	5.00	2549.18				2.800	2.800	141.0
1081	2004-02-06T07:21	90.0	1	1257	5.00	2550.08				2.400	2.400	143.0
1082	2004-02-06T09:48	100.0	1	1358	6.00	2557.03				2.700	2.700	146.0	0.421	922.0	-30.6
1083	2004-02-06T11:58	66.0	1	1037	4.00	2551.62				2.900	2.900	116.0
1084	2004-02-06T14:36	43.0	1	1510	3.00	2551.91				2.300	2.300	121.0
BR1	2004-02-06T17:25					2551.76	bailed down to bottom of the hole, tower flipped over when a band broke						0.040	954.0	-27.0
FR45	2004-02-06T23:08					2551.76	almost no slush
FR46	2004-02-07T00:37					2551.76
1085	2004-02-07T12:14	36.0	1	1095	3.00	2552.55				2.200	2.200	119.0
FR47	2004-02-07T15:12				4.00	2552.55	4kg chips
1086	2004-02-07T21:35	21.0	1	1154		2552.55				2.200	2.200	125.0
FR48	2004-02-08T03:00					2552.55						124.0
	2004-02-08T10:00					2552.55							0.523	920.0	-29.3
	2004-02-08T11:00					2552.55							0.571	920.0	-29.3
END	2004-02-08T12:00					2552.55	plumbing with antitorque zeroed on lid					70.0
START	2005-11-14T17:10					2552.55	measuring the liquid level, indicated depth with logger approx. 80 m					80.0
	2005-11-15T08:53					2554.37	logging the hole					80.0
	2005-11-20T15:00					2550.00	logging the hole					80.0
RR1	2005-11-21T12:00				4.00	2378.37	reaming with drill head with new cutters	old electronics mounted				81.0
RR2	2005-11-22T09:20					1700.00	long drill with conical reamer attached to the end of the core barrel; no further penetration at approx. 1700 m, persistent antitorque rotation					81.0
RR3	2005-11-22T15:00				3.50	339.15	reaming hole from top with conical tool
RR4	2005-11-22T17:20				11.00	791.00	aborted run due to no more rotation possible
RR5	2005-11-22T22:32				13.00	1277.60	aborted run for cleaning and sharpening of the tool; repeated AT failures, tightened AT by 1/2 turn giving between 35-36.5 mm
RR6	2005-11-23T10:50				11.00	1365.00	aborted due to AT failures	changed inclinometer
RR7	2005-11-23T16:40				21.00	1799.00	aborted to clean
RR8	2005-11-24T13:30				14.00	1948.15	aborted due to rising current					86.0
RR9	2005-11-25T02:30				18.00	2000.10	aborted due to rising idle current					88.0
RR10	2005-11-25T07:55				9.00	2101.11
RR11	2005-11-25T14:05				18.00	2151.20	high idle current
RR12	2005-11-25T19:17				16.00	2204.56
RR13	2005-11-26T03:20				17.00	2270.22						97.0
RR14	2005-11-26T08:47				15.50	2346.07						98.0
RR15	2005-11-26T14:55				9.00	2374.00	stopped for Saturday night					94.0
RR16	2005-11-27T14:56				15.00	2425.00						99.0
RR17	2005-11-28T01:00				6.50	2450.19						98.0
RR18	2005-11-28T09:50				19.00	2484.98						99.0
RR19	2005-11-28T19:15				16.00	2500.00			pump blocked with chips and severly damaged: upper wave guide broken, one valve ring and 3 valves replaced
FR48	2005-11-29T02:55				0.00	2401.00						92.0
RR20	2005-11-29T11:45					2425.08						98.0
RR21	2005-11-29T15:15				8.00	2500.59						99.0
RR22	2005-11-29T17:48				19.00	2510.00			chip chamber completely filled, pump damaged, several parts exchanged			99.0
RR23	2005-11-29T21:36				16.00	2514.57
RR24	2005-11-30T01:35				17.00	2520.00						98.0
RR25	2005-11-30T05:30				14.00	2525.00						98.0
RR26	2005-11-30T09:36				14.50	2530.00
RR27	2005-11-30T13:20				14.50	2535.00	changed to drillhead 3 x 0.18 mm#					98.0
RR28	2005-11-30T16:45				14.00	2535.04	stopped because of AT failure					140.0
RR29	2005-11-30T20:14				19.00	2540.00						143.0
RR30	2005-11-30T23:26				17.00	2544.00						144.0
RR31	2005-12-01T04:20				17.00	2547.30	stopped due to unstable current		chip chamber and pump completely filled, two valve rings are out of place			150.0
RR32	2005-12-01T09:08				19.00	2549.00						153.0
RR33	2005-12-01T12:25				14.00	2550.90	load dropping, while going down					153.0
RR34	2005-12-01T15:24				14.00	2552.90	seems to rest on something (bottom ?)					158.0
FR49	2005-12-01T18:45					2436.88	can not penetrate further than 2457 m, pull back and can not penetrate beyond 2436.88 m					160.0
RR35	2005-12-01T21:45				0.00	2507.04	reamed again and pulled up after 100 m					161.0
RR36	2005-12-02T01:05				7.00	2552.22						165.0
FR50	2005-12-02T03:55				8.00	2534.36						167.0
RR37	2005-12-02T06:20				15.00	2552.20
FR51	2005-12-02T09:32				9.00	2539.66						172.0
RR38	2005-12-02T12:30				14.00	2552.30						174.0
FR52	2005-12-02T15:10				9.00	2543.00	dumped pure densifier					175.0	1.040	1300.0	-29.0
RR39	2005-12-02T22:00				13.00	2520.00	mounted the drill head; cutters came up damaged					148.0	0.471	924.0	-30.0
RR40	2005-12-03T02:00				11.00	2552.71						85.0
FR52	2005-12-03T05:15				12.00	2552.50						85.0
RR41	2005-12-03T08:25				10.50	2552.43	no clear cutting		two metal parts and 1 screw are missing			90.0
1087	2005-12-03T11:45	6.5	1		5.00	2552.50	heavily damaged core					90.0
FR53	2005-12-03T14:50				4.50	2552.50
FR54	2005-12-03T17:20				2.00	2552.60						91.0
FR55	2005-12-04T14:20				1.00	2552.60						91.0
1088	2005-12-04T17:30					2552.05	drillhead with centering tools					96.0
1089	2005-12-04T19:55	6.5	1	980	1.50	2553.02	AT failure; knives heavily damaged; plenty of metal chips					95.0
1090	2005-12-04T23:10			803		2552.80	loosened AT before run from 36/35.2/37.2 mm to 33.4/33.6/35.5 mm; AT failure					98.0
1091	2005-12-05T01:30	3.0	1	810	2.00	2552.98	tuned AT to 34.7/34.1/36.0 mm					99.0
1092	2005-12-05T03:40	3.5	2	889		2552.78
1093	2005-12-05T06:10					2552.80	no penetration					99.0
1094	2005-12-05T09:33	7.0	4	996		2553.59	changed AT to 34.9/36.8/35.3 mm					104.0
1095	2005-12-05T13:00	9.0	1	772		2552.79	changed to new drillhead with 0.16/0.17 mm clearance					106.0
1096	2005-12-05T15:30	8.5	1	1024		2552.54	tightened AT to 36.2/38.3/37.0 mm					110.0
1097	2005-12-05T19:04			870		2552.54	changed to head with different cutters 0.225/0.22/0.225 mm; changed to used but resharpened AT blades 34.8/34.1/34.1 mm					98.0	0.357	926.0	-29.0
1097	2005-12-05T19:04			760		2552.54						98.0
1098	2005-12-05T22:15	34.0	1	1262		2553.22						98.0
1099	2005-12-06T00:30			700		2553.22						100.0
1099	2005-12-06T00:30	8.5	1	696		2553.29
1100	2005-12-06T03:00	3.0	1	804	4.00	2553.73						102.0
1101	2005-12-06T05:25	10.5	3	875	3.00	2550.80						102.0
1102	2005-12-06T08:55	13.5	1	1061	1.00	2553.67	switched to French HT with Danish top coupling and PE-spiral core barrel					102.0
1103	2005-12-06T14:18	21.5	1	1297		2552.48	found huge brass piece of unknown origin on top of core; head with new AWI cutters 0.175/0.18/0.19 mm; switched back to long drill					102.0
1104	2005-12-06T18:25	7.0	1	902		2553.30						110.0
1105	2005-12-06T21:00	9.0	1	984	2.00	2553.55						110.0
1106	2005-12-06T23:27	4.0	1	1024		2553.90	loosened AT to 33.0/33.0/33.7 mm					119.0
1107	2005-12-07T02:15	8.0	3	1444	6.00	2553.68						123.0
1108	2005-12-07T04:35	20.0	1	893		2554.38						127.0
1109	2005-12-07T07:00	13.5	1	871		2554.38						135.0
1110	2005-12-07T09:25	17.0	1	620		2554.18	put 1 shim under each cutter					136.0
1111	2005-12-07T12:35	15.5	2	1162	3.00	2554.36	measured cutters to 0.12/0.125/0.105 mm					113.0	0.341	933.0	-30.0
1112	2005-12-07T15:20	10.0	1	583		2554.42	stop because no penetration with dropping load					93.0	0.386	933.0	-30.1
1113	2005-12-07T17:36	10.5	1	726		2554.80						95.0
1114	2005-12-07T20:50	11.5	1	1109		2554.73	loosened AT to 33.5/33.0/33.2 mm					97.0
1115	2005-12-08T00:20	6.0	1	1314		2554.92	changed to head with 1 cutter and 2 pitch cutters with 0° free angle and 1 mm/2 mm
1116	2005-12-08T03:10	16.5	1	633	10.00	2555.43	changed to old drill head					109.0
1117	2005-12-08T05:20	18.0	1	686		2555.43						114.0
1118	2005-12-08T07:25	34.0	1	610		2556.11
1119	2005-12-08T09:40	11.0	1	848		2556.05						119.0
1120	2005-12-08T12:00	9.0	1	1106	3.00	2556.15						93.0	0.472	926.0	-31.5
1121	2005-12-08T14:30	18.0	1	593		2555.78	measured head to 0.12/0.12/0.13 mm; tuned to 0.145/0.155/0.16 mm					96.0
1122	2005-12-08T16:38	52.0	1	633	3.00	2556.69				1.500	1.500	98.0
1123	2005-12-08T21:10	11.0	1	1121	1.00	2556.60	changed to HT drill with same head			2.800	2.800	99.0
1124	2005-12-08T23:25	128.0	1	1167	5.50	2557.89	changed to head H2 with new AWI cutters; tuned to 0.17/0.18/0.18 mm					102.0
1125	2005-12-09T01:25	35.0	1	954	3.00	2558.95						106.0
1126	2005-12-09T03:40	80.5	1	918	2.50	2558.99						108.0
1127	2005-12-09T05:55	29.0	1	865		2559.27						110.0
1128	2005-12-09T08:10	63.5	1	1316	3.00	2560.25				4.000	4.000	111.0
1129	2005-12-09T10:46	105.0	1	502	5.00	2561.40				3.800	3.800	113.4
1130	2005-12-09T13:15	75.0	1	1166	4.50	2561.78				3.600	3.600	94.0	0.376	923.0	-29.0
1131	2005-12-09T15:18	102.0	1	626	5.50	2562.87				3.650	3.650
1132	2005-12-09T17:18	39.0	1	1078	2.50	2563.47				3.300	3.300	93.0
1133	2005-12-09T19:30	50.0	1	1505	2.50	2563.70						94.0
1134	2005-12-09T21:35	57.0	1	1291	4.00	2564.35	changed to head H1 tuned to 0.14/0.15/0.16 mm					97.0
1135	2005-12-10T00:20	55.0	2	1230	2.00	2564.86	changed to head H2 tuned to 0.175/0.18/0.19 mm					100.0
1136	2005-12-10T02:25	70.0	1	1102	5.00	2565.75	changed to head H1 tuned to 0.14/0.15/0.16 mm; screws sealed with candle wax					102.0
1137	2005-12-10T04:20	29.0	1	1818	2.50	2566.50						105.0
1138	2005-12-10T06:40	28.5	1	1222		2566.24	persistent antitorque rotation			2.500	2.500	108.0
1139	2005-12-10T08:50	67.0	1	1031	5.00	2566.99				2.500	2.500	107.0
1140	2005-12-10T11:15	76.5	1	1256	3.00	2567.70	mounted 3rd core catcher; sealed shoe screws with wax			1.000	1.000	109.0
1141	2005-12-10T13:40	42.0	1	1196	2.50	2568.03						90.0	0.339	920.0	-23.3
1142	2005-12-10T16:10	57.0	2	1233	3.00	2569.16						90.0
FR56	2005-12-11T09:02				2.00	2569.50						92.0
1143	2005-12-11T13:48	13.0	1	834		2568.09	changed to long drill; freshly tuned drill head 0.145/0.15/0.165 mm; shoes sealed with glued PE					98.0
1144	2005-12-11T16:30	12.0	1	1353		2569.31	changed to short drill					96.0
1145	2005-12-11T18:50	106.0	1	1229	5.50	2569.62				3.200	3.200	98.0
1146	2005-12-11T20:50	120.0	1	714	5.00	2569.98				3.350	3.350	100.0
1147	2005-12-11T22:58	89.0	1	1049	5.00	2571.83				3.300	3.300	100.0
1148	2005-12-12T00:55	98.0	1	1462	5.00	2573.22				3.450	3.450	88.0	0.366	923.0	-27.5
1149	2005-12-12T02:55	103.0	1	1038	5.00	2574.31				3.300	3.300	91.0
1150	2005-12-12T04:50	105.0	1	1150	5.00	2575.33				3.300	3.300	93.0
1151	2005-12-12T07:05	104.0	2	1120	5.00	2576.30				3.100	3.100	96.0
1152	2005-12-12T09:10	81.0	1	995	5.00	2576.94				3.360	3.360	93.0
1153	2005-12-12T11:33	97.0	1	714	6.00	2577.66				3.200	3.200	94.0
1154	2005-12-12T14:12	75.5	1	1275	5.00	2578.00				3.400	3.400	93.0
1155	2005-12-12T16:35	108.0	1	1111	5.00	2579.72				3.370	3.370	95.0
1156	2005-12-12T18:45	110.0	1	1216	5.00	2580.52				3.400	3.400	93.0
1157	2005-12-12T20:45	85.0	1	687	5.00	2581.38				3.400	3.400	100.0
1158	2005-12-12T22:40	112.0	1	1408	6.00	2582.67				3.600	3.600	102.0
1159	2005-12-13T00:45	87.0	1	974	5.00	2583.97				3.380	3.380	106.0
1160	2005-12-13T02:45	91.7	1	1360	5.00	2584.93				3.350	3.350	108.0
1161	2005-12-13T04:45	88.0	1	1266	5.00	2585.85				3.350	3.350	111.0
1162	2005-12-13T06:50	66.0	1	1298	4.00	2586.45				3.200	3.200	113.0
1163	2005-12-13T09:50	6.0	1	711		2585.71	changed core catcher springs; changed to long drill; sharpened all core catchers					113.0
1164	2005-12-13T12:15	24.0	1	994		2586.38	changed to short drill			3.500	3.500	117.0
1165	2005-12-13T14:22	58.0	1	676	6.00	2587.02				2.500	2.500	92.0	0.370	922.0	-27.6
1166	2005-12-13T16:22	97.0	1	667	4.50	2587.71				2.660	2.660	94.0
1167	2005-12-13T18:20	103.0	2	1154		2588.68				3.000	3.000	96.0
1168	2005-12-13T20:55	7.0	1	1056	5.00	2588.47	changed to long drill with new plastic centering parts on core barrel					101.0
1169	2005-12-13T23:30	17.0	2	1095		2589.16	changed to HT drill with 18000 holes; 1 cutter slightly damaged - sharpened					104.0
1170	2005-12-14T01:35	11.0	1	643	5.00	2589.38						107.0
1171	2005-12-14T03:40	67.0	1	986	4.00	2589.32	changed to drill head H1 0.145/0.15/0.15 mm			3.390	3.390	110.0
1172	2005-12-14T05:35	98.0	1	1148	5.00	2590.91				3.350	3.350	107.0
1173	2005-12-14T07:40	45.0	1	1273		2591.55				3.400	3.400	113.0
1174	2005-12-14T10:05	101.0	1	1137	6.00	2592.16				3.200	3.200	113.0
1175	2005-12-14T12:42	64.0	1	1060	3.00	2592.71				3.500	3.500	89.0	0.407	918.0	-23.9
1176	2005-12-14T15:13	81.0	1	1513	4.50	2593.28				3.400	3.400	90.0
1177	2005-12-14T17:40	101.0	1	1023	5.50	2594.99				3.400	3.400	91.0
1178	2005-12-14T19:40	58.0	1	1110	2.00	2595.29				3.300	3.300	93.0
1179	2005-12-14T21:50	73.0	1	1234	3.50	2595.89				3.400	3.400	96.0
1180	2005-12-15T00:01	68.0	1	1207	2.50	2596.49				3.380	3.380	100.0
1181	2005-12-15T01:55	49.0	1	1466		2597.80				3.530	3.530	102.0
1182	2005-12-15T04:05	61.0	1	867	5.00	2598.52				3.420	3.420	102.0
1183	2005-12-15T06:05	23.0	1	1123	1.00	2599.07				3.260	3.260	106.0
1184	2005-12-15T09:07	112.0	1	1306	4.00	2598.63				3.300	3.300	106.0
1185	2005-12-15T11:05	58.0	1	1302	2.50	2600.05				3.300	3.300	108.0
1186	2005-12-15T13:15	68.5	1	882	3.00	2600.52				3.350	3.350	88.0	0.370	921.0	-26.9
1187	2005-12-15T15:20	61.0	1	1240	2.00	2600.87				3.300	3.300	90.0
1188	2005-12-15T17:45	86.5	1	1143	3.00	2602.21				3.500	3.500	90.0
1189	2005-12-15T20:05	18.0	1	1810		2602.17	changed to Danish shaft and pump with French outer barrel					92.0
1190	2005-12-15T23:25	34.0	3	734		2602.83				3.300	3.300	94.0
1191	2005-12-16T01:30	34.0	1	833		2603.10				3.300	3.300	96.0
1192	2005-12-16T05:05	46.0	1	853	5.00	2603.48	changed to French shaft and pump			3.350	3.350	99.0
1193	2005-12-16T07:30	102.0	1	1303	6.00	2604.75				3.200	3.200	102.0
1194	2005-12-16T09:30	20.0	1	984	1.00	2604.87						101.0
1195	2005-12-16T11:40	52.0	1	1501	2.50	2605.12				3.000	3.000	84.0	0.411	917.0	-23.3
1196	2005-12-16T14:10	82.0	1	1233	4.50	2605.79	changed to PE spiral core barrel with French HT drill			3.000	3.000	85.0
1197	2005-12-16T16:20	75.0	1	1235	4.00	2606.51				3.200	3.200	86.0
1198	2005-12-16T18:45	19.0	1	1190	1.00	2606.82						86.0
1199	2005-12-16T21:00	82.0	1	1150	3.50	2607.43				3.400	3.400	87.0
1200	2005-12-16T23:40	101.0	1	1308	5.00	2608.71				3.400	3.400	89.0
1201	2005-12-17T01:55	103.0	1	1305	5.00	2610.23				3.350	3.350	93.0
1202	2005-12-17T04:05	81.0	1	1208	4.00	2610.97				3.550	3.550	95.0
1203	2005-12-17T06:25	24.0	1	1201		2611.55						98.0
1204	2005-12-17T08:40	89.0	1	847	4.00	2611.86				3.700	3.700	92.0
1205	2005-12-17T11:00	114.0	1	1051	5.00	2612.44	changed to drill head H2 0.165/0.15/0.145 mm			3.060	3.060	84.0	0.344	919.0	-24.7
1206	2005-12-17T13:10	91.0	1	1222	4.00	2613.23				3.200	3.200	83.0
1207	2005-12-17T15:25	67.5	1	717	4.00	2613.90				3.300	3.300	84.0
1208	2005-12-17T17:40	79.0	1	1127	5.00	2614.90				0.500	3.200	86.0
FR57	2005-12-18T04:30				3.00	2614.90						92.0
1209	2005-12-18T13:20	90.0	1	1606	5.00	2616.04				3.100	3.100	89.0
1210	2005-12-18T15:30	79.0	1	1302	4.50	2616.12				3.000	3.000	89.0
1211	2005-12-18T17:25	40.0	1	1312	2.00	2617.31						91.0
1212	2005-12-18T19:45	78.0	1	1122	4.00	2618.19				3.000	3.000	91.0
1213	2005-12-18T21:47	71.0	1	1274	3.00	2618.80			lost one lid of pump; found lid and 1 screw	3.300	3.300	93.0
1214	2005-12-19T00:15	15.0	1	1218		2619.15						95.0
1215	2005-12-19T03:00	115.0	1	1457	7.00	2620.47				3.120	3.120	97.0
1216	2005-12-19T05:00	77.0	1	1015	4.00	2621.76				3.500	3.500	101.0
1217	2005-12-19T07:10	31.0	1	630	2.00	2621.55						104.0
1218	2005-12-19T09:20	82.0	1	1408	6.00	2622.33						103.0
1219	2005-12-19T11:35	54.0	1	1128	3.00	2623.60				3.360	3.360	85.0	0.360	921.0	-27.5
1220	2005-12-19T13:45	38.0	1	696	1.50	2622.86				3.000	3.000	86.0
1221	2005-12-19T17:00	91.0	1	1312	4.50	2623.85	two grooves of the inner barrel heavily iced; changed to aluminium spiral core barrel with the same head			3.200	3.200	91.0
1222	2005-12-19T19:00	49.0	1	1044	3.00	2624.57				3.000	3.000	90.0
1223	2005-12-19T21:40	40.0	1	1266		2624.75				3.280	3.280	91.0
1224	2005-12-20T00:25	21.0	1	858		2625.22				3.300	3.300	95.0
1225	2005-12-20T03:20	31.0	1	1607	4.00	2625.60	changed to barrel with PE spirals			3.450	3.450	98.0
1226	2005-12-20T05:50	74.0	1	1080	4.00	2626.99				3.400	3.400	100.0
1227	2005-12-20T08:25	31.0	1	691	2.00	2627.49						102.0
1228	2005-12-20T10:30	112.0	1	1252	5.00	2627.49	changed to H2, tuned 0.16/0.165/0.16 mm			3.200	3.200	102.0
1229	2005-12-20T12:40	103.0	1	1282	5.50	2628.76				3.200	3.200	103.0
1230	2005-12-20T15:00	32.0	1	1505	2.00	2628.61				3.200	3.200	86.0	0.360	919.0	-24.5
1231	2005-12-20T17:15	83.0	1	1406	4.50	2629.58				3.300	3.300	88.0
1232	2005-12-20T19:55	85.0	1	972	4.00	2630.38				3.500	3.500	89.0
1233	2005-12-20T22:10	106.0	1	1156	5.00	2631.66				3.250	3.250	91.0
1234	2005-12-21T00:15	91.0	1	1414	5.00	2632.63				3.300	3.300	93.0
1235	2005-12-21T02:35	96.0	1	929	5.00	2633.58				3.300	3.300	95.0
1236	2005-12-21T04:40	49.0	1	1024	2.00	2633.97				3.390	3.390	98.0
1237	2005-12-21T07:05	88.0	1	1211	4.00	2635.08				3.600	3.600	100.0
1238	2005-12-21T09:05	82.0	3	1155	4.50	2636.48				3.600	3.600	99.0
1239	2005-12-21T11:35	40.0	2	1302	2.00	2636.08				3.200	3.200	83.0	0.372	918.0	-23.5
1240	2005-12-21T14:00	65.0	1	1809	3.00	2636.51						86.0
1241	2005-12-21T17:28	34.0	1	1223	1.00	2637.00				3.200	3.200	87.0
1242	2005-12-21T19:40	31.0	1	1058	1.50	2637.79				3.200	3.200	88.0
1243	2005-12-21T21:50	88.0	2	1310		2638.18				3.200	3.200	88.0
1244	2005-12-21T23:59	47.0	2	1190	6.00	2638.71				3.000	3.000	91.0
1245	2005-12-22T02:25	23.0	1	1032	1.00	2639.86				3.650	3.650	93.0
1246	2005-12-22T04:25	81.0	1	1700	3.00	2640.56				3.600	3.600	94.0
1247	2005-12-22T07:00	68.0	1	1207	4.00	2641.33				3.800	3.800	97.0
1248	2005-12-22T09:15	66.5	1	1010	3.00	2641.20				3.300	3.300	96.0
1249	2005-12-22T11:05	57.0	1	1510	2.50	2641.62				3.300	3.300	99.0
1250	2005-12-22T13:55	13.5	1	988		2641.84						85.0	0.310	919.0	-24.0
1251	2005-12-22T16:54	85.5	1	1019	4.00	2642.41	changed to Rufli head with 1 cutter, 2 x 0° free angle with 1 mm clearance steps; nominal pitch 3 mm			3.200	3.200	87.0
1252	2005-12-22T19:10	96.5	1	741	4.50	2643.43				3.200	3.200	87.0
1253	2005-12-22T21:13	56.0	3	719	3.00	2644.07				2.700	2.700	89.0
1254	2005-12-23T00:05	50.0	2	694		2644.74	measured clearance 0/0.85/1.9 mm; adjusted to 0/0.7/1.4 mm					92.0
1255	2005-12-23T02:05	117.0	1	724	7.00	2644.96				2.400	2.400	94.0
1256	2005-12-23T04:20	94.0	1	1407	5.00	2647.16				2.400	2.400	96.0
1257	2005-12-23T06:30	81.0	1	777	4.00	2647.77				2.500	2.500	98.0
1258	2005-12-23T09:10	62.0	1	1275	3.00	2648.31				2.300	2.300	95.0
1259	2005-12-23T11:40	96.0	1	984	4.00	2649.19				2.400	2.400	85.0	0.365	919.0	-25.0
1260	2005-12-23T13:58	95.0	1	676	4.00	2650.14				2.400	2.400	86.0
1261	2005-12-23T16:10	56.0	2	904	2.00	2650.51				2.700	2.700	87.0
1262	2005-12-23T18:15	86.0	1	692	1.00	2651.73				2.400	2.400	88.0
1263	2005-12-23T20:37	52.0	1	698	3.00	2652.27				2.500	2.500	89.0
1264	2005-12-23T22:55	95.0	1	1120	4.00	2653.17				2.550	2.550	90.0
1265	2005-12-24T01:10	83.0	1	1205	3.00	2654.25				2.550	2.550	94.0
1266	2005-12-24T03:00	88.0	1	730	4.00	2655.58				2.620	2.620	95.0
1267	2005-12-24T05:00	59.0	1	1204	2.00	2655.92				2.550	2.550	96.0
1268	2005-12-24T07:05	81.0	1	1125	2.50	2656.35				2.750	2.750	98.0
1269	2005-12-24T09:10	110.0	1	1166	4.00	2657.31				2.350	2.350	95.0
1270	2005-12-24T11:30	66.0	2	2080	3.50	2657.83				2.600	2.700	99.0
1271	2005-12-24T16:00	85.0	2	1413	4.00	2658.60	changed to drill head H1 with closed core catcher windows; pitch adjusted to 0/0.65/1.3 mm			2.200	2.200	84.0	0.369	918.0	-23.5
FR58	2005-12-25T14:12				2.00	2659.00
1272	2005-12-25T16:35	86.0	1	1248	5.00	2659.29				2.500	2.500	87.0
1273	2005-12-25T18:00	102.0	1	1025	5.00	2660.96				2.420	2.420	86.0
1274	2005-12-25T20:45	95.0	1	1026	5.00	2661.40				2.500	2.500	89.0
1275	2005-12-25T22:54	72.0	2	987	3.50	2662.22				2.400	2.400	90.0
1276	2005-12-26T01:15	96.0	1	1088	5.00	2663.23				2.550	2.550	74.0	0.292	916.5	-22.2
1277	2005-12-26T03:20	91.0	1	948	4.50	2664.60				2.400	2.400	78.0
1278	2005-12-26T05:25	100.0	1	642	5.00	2665.30				2.400	2.400	82.0
1279	2005-12-26T07:35	73.5	1	1510	3.50	2665.94				2.150	2.150	86.0
1280	2005-12-26T10:00	84.0	1	1074	3.50	2666.59				2.200	2.200	87.0
1281	2005-12-26T12:15	74.0	1	1523	4.00	2667.31				2.800	2.800	87.0
1282	2005-12-26T15:10	60.0	1	1201	3.00	2667.94				2.500	2.500	88.0
1283	2005-12-26T17:45	42.0	1	1083	2.50	2668.31				2.800	2.800	89.0
1284	2005-12-26T20:15	56.0	2	1837	2.50	2668.75				2.500	2.500	89.0
1285	2005-12-26T23:05	58.0	1	2400		2669.76				2.400	2.400	91.0
1286	2005-12-27T03:05	20.0	1	1208	4.50	2669.94				2.400	2.400	84.0	0.275	918.0	-24.2
1287	2005-12-27T05:00	45.0	1	991	2.00	2670.63				2.400	2.400	87.0
1288	2005-12-27T14:05	41.0	1	1504	2.00	2670.58				2.300	2.300	84.0
1289	2005-12-27T16:30	48.0	1	1232	1.00	2671.32				2.500	2.500	85.0
1290	2005-12-27T18:40	49.0	1	718	2.00	2671.68				2.100	2.100	87.0
1291	2005-12-27T21:45	53.0	1	1366	1.00	2672.20				1.550	1.550	89.0
1292	2005-12-27T23:50	26.0	1	1457	1.00	2672.76				1.600	1.600	90.0
1293	2005-12-28T02:05	41.0	1	1196	1.00	2673.64				1.580	1.580	85.0	0.175	918.0	-23.5
1294	2005-12-28T04:05	35.0	1	1118	1.00	2673.76				1.850	1.850	87.0
1295	2005-12-28T06:15	33.0	1	1116	1.00	2674.59				1.800	1.800	90.0
1296	2005-12-28T08:15	38.0	1	1275	2.00	2674.33						89.0
1297	2005-12-28T10:45	39.0	1	1140	1.00	2674.41						89.0
1298	2005-12-28T13:30	24.0	1	985	2.00	2674.55	changed to aluminium spiral core barrel with Danish pump (hard springs), same drill head			1.125	1.125	90.0
1299	2005-12-28T16:38	11.0	1	1759	2.00	2674.72	changed to french shaft with lower valve; tuned head to nominal pitch 2.0; sharped cutter					90.0
1300	2005-12-28T19:45	14.0	1	1519		2675.01						89.0
1301	2005-12-28T22:00	26.0	1	739		2675.20				1.400	1.400	81.0	0.316	917.0	-22.5
1302	2005-12-29T00:05	35.0	1	908	4.00	2675.57				2.050	2.050
1303	2005-12-29T02:10	38.0	1	1551	2.00	2676.47						84.0
1304	2005-12-29T04:30	32.0	1	1495	2.00	2676.45				1.920	1.920	86.0
1305	2005-12-29T06:35	34.0	1	1407	2.00	2676.91	changed to plastic-spiral core barrel					88.0
1306	2005-12-29T08:45	55.0	1	1517	1.00	2677.39				2.900	2.900	86.0
1307	2005-12-29T11:15	29.5	1	1408		2677.14				2.800	2.800	88.0
1308	2005-12-29T13:40	34.0	1	740		2677.65						87.0
1309	2005-12-29T16:30	38.0	1	1217		2677.97						88.0
1310	2005-12-29T18:35	22.0	1	1260		2678.19	sharpened cutter and core catchers; tuned to 0/0.58/1.2 mm, nominal pitch 1.8 mm; one screw of plastic spiral lost					92.0
1311	2005-12-29T21:40	43.0	1	944	2.50	2678.59				1.950	1.950	92.0
1312	2005-12-29T23:35	40.0	1	1526	2.50	2679.21				1.950	1.950	86.0	0.333	918.0	-24.0
1313	2005-12-30T02:00	33.0	1	1410	1.50	2679.57				1.950	1.950	88.0
1314	2005-12-30T04:10	46.5	1	1131	2.50	2680.45				2.000	2.000	87.0
1315	2005-12-30T06:25	38.0	2	1529	2.00	2680.79						89.0
1316	2005-12-30T08:50	42.0	1	1265	2.00	2680.91	changed damaged cutter			2.200	2.200	88.0
1317	2005-12-30T11:25	35.0	1	1238	2.00	2681.08				2.200	2.200	89.0
1318	2005-12-30T13:50	38.0	1	740	2.00	2681.52				1.600	1.600	88.0
1319	2005-12-30T16:48	31.0	1	1297	1.50	2681.64	changed to cutter with chip breaking grooves; tuned 0/0.65/1.3 mm; nominal 2.0 mm					90.0
1320	2005-12-30T18:55	36.0	1	1282	1.50	2682.16				1.500	1.500	90.0
1321	2005-12-30T21:45	41.0	1	1341	1.50	2682.22				1.430	1.430	94.0
1322	2005-12-30T23:30	38.0	1	1404	2.00	2682.92				1.590	1.590	82.0	0.353	918.0	-24.0
1323	2005-12-31T01:45	35.0	1	1207	2.00	2683.33				1.580	1.580	84.0
1324	2005-12-31T04:00	38.0	1	1213	2.00	2683.72				1.580	1.580	87.0
1325	2005-12-31T06:20	39.0	1	1198	2.50	2684.20				1.550	1.550	89.0
1326	2005-12-31T08:15	32.0	1	667	1.50	2684.26				1.800	1.800	87.0
1327	2005-12-31T10:30	41.0	1	1063	2.50	2684.67				1.500	1.500	89.0
1328	2005-12-31T12:40	36.0	1	1245	2.00	2684.88				2.400	2.400	89.0
1329	2005-12-31T14:40	31.0	1	1327		2685.04				1.550	1.550	89.0
1330	2005-12-31T16:45	32.0	1	1411		2685.41				1.600	1.600	90.0
1331	2006-01-01T17:10	24.0	1	1179	1.50	2685.36				1.740	1.740	92.0
1332	2006-01-01T19:50	28.0	1	1614	2.50	2686.21						95.0
1333	2006-01-01T21:55	27.0	1	1355	0.00	2686.49				1.860	1.860	88.0	0.202	918.0	-23.4
1334	2006-01-02T00:15	47.0	3	1498	3.00	2687.02	cutter changed, new form			2.000	2.000	90.0
1335	2006-01-02T02:40	52.0	1	1539	2.50	2688.09				2.250	2.500	91.0
1336	2006-01-02T05:05	47.0	1	1427	2.50	2688.09				2.250	2.250	93.0
1337	2006-01-02T07:10	42.0	1	1132	1.50	2688.27				2.300	2.300	95.0
1338	2006-01-02T09:43	12.0	1	1196	1.00	2688.73				2.600	2.600	95.0
1339	2006-01-02T11:50	28.0	1	1101		2688.95						97.0
1340	2006-01-02T14:10	35.0	1	1287	3.00	2689.21				1.650	1.650	98.0
1341	2006-01-02T16:15	21.0	1	1520	1.00	2689.35				2.200	2.200	84.0	0.408	917.0	-23.0
1342	2006-01-02T18:30	34.0	1	1227	1.50	2689.57						85.0
1343	2006-01-02T20:30	28.0	1	1370	1.00	2690.00				2.500	2.500	85.0
1344	2006-01-02T22:35	21.0	2	1178		2690.12						87.0
1345	2006-01-03T00:50	3.0	1	1351		2690.45	switched to core barrel with aluminium spirals and aluminium cutters at windows of outer barrel same drill head					89.0
1346	2006-01-03T02:55	16.0	1	970	2.00	2690.51	changed to french pump, outer barrel ch., 1 shoe damaged changed					91.0
1347	2006-01-03T05:30	2.0	1	835	0.50	2690.58						94.0
1348	2006-01-03T08:10	20.0	1	1149	0.50	2690.72				2.300	2.300	90.0
1349	2006-01-03T10:30	16.0		1618		2690.77				2.100	2.100	91.0
1350	2006-01-03T13:40	15.0	1	1457		2690.69				1.500	1.500	93.0
1351	2006-01-03T15:50	13.0		1462		2691.20						93.0
1352	2006-01-03T18:15	20.0		1352	1.00	2691.48	drill head covered with frozen glycol			1.750	1.750	97.0
1353	2006-01-03T21:35	32.0		1550	2.50	2691.81	drill head covered with frozen glycol					98.0
1354	2006-01-04T00:00	124.0	7	1206		2692.98	500 g ethanol/water, 50%/50%					85.0	0.350	918.0	-24.0
1355	2006-01-04T03:00	14.0	1	1571		2693.57	250 g ethanol/water, 50%/50%					87.0
1356	2006-01-04T06:40	15.0	1	1220	0.00	2693.53	400 g ethanol/water, 50%/50%					90.0
1357	2006-01-04T10:35	25.0		1583		2693.53						89.0
1358	2006-01-04T13:40	64.0	1	981	6.50	2693.85						87.0
1359	2006-01-04T16:25	42.0	1	1559	2.50	2694.53						89.0
1360	2006-01-04T19:00	67.0	1	1382	5.00	2695.09	100 g ethanol/water, 50%/50%			1.800	1.800	91.0
1361	2006-01-04T21:30	106.0	1	1037	7.00	2696.08	125 ml ethanol/water, 50%/50%			1.700	1.700	92.0
1362	2006-01-04T23:48	54.0	1	1513	4.00	2696.19	100 ml ethanol/water, 50%/50%					82.0	0.366	915.0	-21.0
1363	2006-01-05T02:15	69.0	2	1625		2697.39	90 ml ethanol/water, 50%/50%			1.950	1.950	85.0
1364	2006-01-05T05:20	99.0	1	1161	7.00	2698.56	125 ml ethanol/water, 50%/50%			1.950	1.950	88.0
1365	2006-01-05T07:55	79.0	1	659	5.00	2699.34	125 ml ethanol/water, 50%/50%			2.550	2.550	88.0
1366	2006-01-05T10:25	125.0	1	1082	7.00	2699.98	121 ml ethanol/water, 50%/50%					88.0
1367	2006-01-05T12:55	111.0	1	1407	7.50	2701.35	110 ml ethanol/water, 50%/50%			1.850	1.850	88.0
1368	2006-01-05T15:14	105.0	1	1357	7.00	2702.67	100 ml ethanol/water, 50%/50%			1.670	1.670	89.0
1369	2006-01-05T17:45	109.0	1	1242	6.00	2703.66	90 ml ethanol/water, 50%/50%			1.700	1.700	90.0
1370	2006-01-05T20:05	90.0	2	1773	5.00	2704.69	90 ml ethanol/water, 50%/50%					91.0
1371	2006-01-05T23:10	77.0	2	1611	8.00	2705.66	100 ml ethanol/water, 50%/50%			1.700	1.700	90.0
1372	2006-01-06T02:30	80.0	1	1449	6.00	2706.44	121 ml ethanol/water, 50%/50%			1.700	1.700	83.0	0.335	908.0	-23.0
1373	2006-01-06T05:05	104.0	2	943	8.00	2707.41	110 ml ethanol/water, 50%/50%			1.700	1.700	85.0
1374	2006-01-06T07:30	98.0	1	1165	5.50	2708.31	110 ml ethanol/water, 50%/50%			1.600	1.600	86.0
1375	2006-01-06T10:10	102.0	1	1523	6.00	2712.20	110 ml ethanol/water, 50%/50%			1.530	1.530	86.0
1376	2006-01-06T13:15	79.0	1	1086	7.00	2709.98	110 ml ethanol/water, 50%/50%			1.800	1.800	87.0
1377	2006-01-06T15:50	108.0	1	1192	6.00	2711.56	110 ml ethanol/water, 50%/50%			1.620	1.620	86.0
1378	2006-01-06T18:15	107.0	2	1617	7.00	2712.40	110 ml ethanol/water, 50%/50%			1.850	1.850	89.0
1379	2006-01-06T21:05	83.0	2	1260	6.00	2713.46	110 ml ethanol/water, 50%/50%			1.700	1.700	90.0	0.345	830.0	-23.0
1380	2006-01-06T23:20	103.0	3	1312	8.00	2714.49	110 ml ethanol/water, 50%/50%					91.0
1381	2006-01-07T02:00	95.0	1	1626	7.00	2715.71	110 ml ethanol/water, 50%/50%					90.0
1382	2006-01-07T04:25	105.0	1	852	7.00	2716.73	110 ml ethanol/water, 50%/50%					93.0
1383	2006-01-07T06:35	85.0	1	1666	5.00	2717.53	110 ml ethanol/water, 50%/50%			1.780	1.780	94.0
1384	2006-01-07T09:30	92.0	1	1460	5.00	2718.39	110 ml ethanol/water, 50%/50%			1.680	1.680	90.0
1385	2006-01-07T12:21	100.0	2	1023	6.50	2719.02	110 ml ethanol/water, 50%/50%			1.900	1.900	92.0
1386	2006-01-07T15:10	106.0	2	1731	6.00	2720.27	110 ml ethanol/water, 50%/50%					90.0
FR59	2006-01-08T07:50				5.00	2720.40						89.0
1387	2006-01-08T13:05	86.0	2	1353	6.00	2720.75	110 ml ethanol/water, 50%/50%			1.970	1.970	77.0
1388	2006-01-08T15:25	87.0	2	1720	5.00	2721.73	110 ml ethanol/water, 50%/50%			2.070	2.070	78.0
1389	2006-01-08T17:50	104.0	1	1654	5.50	2722.91	110 ml ethanol/water, 50%/50%			1.810	1.810	79.0
1390	2006-01-08T20:15	80.0	1	1344	5.00	2723.86	110 ml ethanol/water, 50%/50%			1.970	1.970	80.0
1391	2006-01-08T22:29	97.0	1	1813	5.00	2724.61	110 ml ethanol/water, 50%/50%					81.0
1392	2006-01-09T00:55	73.0	1	1515	6.00	2725.91	110 ml ethanol/water, 50%/50%					83.0
1393	2006-01-09T03:35	106.0	2	1423	8.50	2726.80	110 ml ethanol/water, 50%/50%			1.060	1.060	84.0
1394	2006-01-09T06:30	108.0	1	1274	6.00	2727.63	110 ml ethanol/water, 50%/50%			1.080	1.080	86.0
1395	2006-01-09T09:30	80.0	1	1600	4.50	2728.16	110 ml ethanol/water, 50%/50%			1.900	1.900	86.0
1396	2006-01-09T12:00	71.0	1	1395	4.50	2729.10	110 ml ethanol/water, 50%/50%			1.950	1.950	86.0
1397	2006-01-09T15:00	89.0	4	1371	6.00	2729.88	110 ml ethanol/water, 50%/50%			1.620	1.620	88.0
1398	2006-01-09T17:10	97.0	1	1350	6.00	2731.03	110 ml ethanol/water, 50%/50%			1.910	1.910	89.0
1399	2006-01-09T19:20	93.0	1	1516	6.00	2731.85	110 ml ethanol/water, 50%/50%			1.960	1.960	90.0
1400	2006-01-09T21:30	98.0	2	1328	7.50	2732.89	110 ml ethanol/water, 50%/50%			1.640	1.640	90.0
1401	2006-01-10T02:10	42.0	2	1617		2733.44	110 ml ethanol/water, 50%/50%					81.0
1402	2006-01-10T05:05	18.0	1	1507	3.50	2733.89	110 ml ethanol/water, 50%/50%					84.0
1403	2006-01-10T07:45	96.0	1	1255	5.00	2734.39	110 ml ethanol/water, 50%/50%			1.690	1.690	88.0
1404	2006-01-10T10:00	95.0	1	1286	5.00	2735.44	110 ml ethanol/water, 50%/50%			1.850	1.850	86.0
1405	2006-01-10T12:20	103.0	1	1814	6.00	2736.36	110 ml ethanol/water, 50%/50%			1.970	1.970	86.0
1406	2006-01-10T15:20	69.0	1	1177	6.00	2737.37	110 ml ethanol/water, 50%/50%			1.930	1.930	87.0
1407	2006-01-10T17:50	105.0	1	1298	6.50	2738.16	110 ml ethanol/water, 50%/50%			1.850	1.850	89.0
1408	2006-01-10T20:00	82.0	1	707	6.50	2739.21	110 ml ethanol/water, 50%/50%			1.840	1.840	89.0
1409	2006-01-10T22:10	96.0	1	803	7.00	2740.10	110 ml ethanol/water, 50%/50%			1.850	1.850	89.0
1410	2006-01-11T00:40	72.0	3	1813	4.80	2740.58	110 ml ethanol/water, 50%/50%			1.850	1.850	82.0
1411	2006-01-11T04:00	59.0	2	1636	6.00	2741.37	110 ml ethanol/water, 50%/50%					84.0
1412	2006-01-11T07:05	18.0	1	1267	2.00	2741.60	130 ml ethanol/water, 50%/50%					85.0
1413	2006-01-11T09:25	74.0	1	1378	5.00	2742.20	110 ml ethanol/water, 50%/50%			1.900	1.900	85.0
1414	2006-01-11T11:50	93.0	1	1280	6.50	2743.15	110 ml ethanol/water, 50%/50%			1.920	1.920	86.0
1415	2006-01-11T14:35	72.0	2	1064	5.50	2743.86	110 ml ethanol/water, 50%/50%			1.810	1.810	86.0
1416	2006-01-11T17:10	99.0	2	1328	7.00	2744.66	110 ml ethanol/water, 50%/50%			1.990	1.990	87.0
1417	2006-01-11T19:50	83.0	1	1807	6.00	2745.62	110 ml ethanol/water, 50%/50%			2.030	2.030	89.0
1418	2006-01-11T22:45	41.0	1	1818	3.50	2746.06	110 ml ethanol/water, 50%/50%					89.0
1419	2006-01-12T01:30	90.0	1	1419	6.50	2746.97	110 ml ethanol/water, 50%/50%			1.870	1.870	81.0
1420	2006-01-12T04:05	22.0	1	1508	2.00	2747.24	110 ml ethanol/water, 50%/50%					84.0
1421	2006-01-12T07:10	80.0	1	1493	6.50	2748.10	130 ml ethanol/water, 50%/50%			1.860	1.860	86.0
1422	2006-01-12T09:35	70.0	1	1272	4.50	2748.58	110 ml ethanol/water, 50%/50%			2.100	2.100	85.0
1423	2006-01-12T11:55	44.0	1	1298	3.00	2748.80	100 ml ethanol/water, 50%/50%			2.150	2.150	85.0
1424	2006-01-12T14:50	58.0	1	1816	3.00	2749.55	100 ml ethanol/water, 50%/50%			2.000	2.000	87.0
1425	2006-01-12T17:30	16.0	1	1527	1.50	2748.71	100 ml ethanol/water, 50%/50%					88.0
1426	2006-01-12T20:15	61.0	1	1753	6.00	2750.52	130 ml ethanol/water, 50%/50%			1.810	1.810	89.0
1427	2006-01-12T22:42	51.0	1	1813	0.00	2751.04	140 ml ethanol/water, 50%/50%			1.850	1.850	79.0
1428	2006-01-13T01:10	43.0	1	1341	3.50	2751.55	150 ml ethanol/water, 50%/50%					80.0
1429	2006-01-13T04:00	28.0	2	1623	2.00	2752.13	110 ml ethanol/water, 50%/50%					84.0
1430	2006-01-13T06:40	70.0	1	1473	4.00	2752.61	200 ml ethanol/water, 50%/50%					84.0
1431	2006-01-13T09:40	10.0	1	1819	0.00	2753.11	200 ml ethanol/water, 50%/50%					84.0
1432	2006-01-13T12:30	15.0	1	1144	0.00	2752.62	200 ml ethanol/water, 50%/50%					84.0
1433	2006-01-13T15:28	24.0	1	1816	1.50	2751.36	changed other head with pitch 2.4 and splitter cutter design					85.0
1434	2006-01-13T18:15	15.0	1	1217	0.00	2751.76						85.0
1435	2006-01-13T21:01	0.0	0	479	0.00	2751.26	lost core barrel
1436	2006-01-14T23:00	0.0	0	1226	0.00	2751.26	fishing for core barrel
1437	2006-01-14T01:15	16.0	1	1533	3.50	2754.02	50 ml ethanol/water, 50%/50%					79.0
1438	2006-01-14T03:40	10.0	1	1521	2.00	2753.97	75 ml ethanol/water, 50%/50%					81.0
1439	2006-01-14T05:55	53.0	1	1768	6.00	2754.08						82.0
1440	2006-01-14T08:40	26.5	1	1309	3.50	2754.15				1.800	1.800	79.0
1441	2006-01-14T11:35	42.0	1	1433	2.50	2754.12	50 ml ethanol/water, 50%/50%			1.760	1.760	81.0
1442	2006-01-14T13:57	33.0	1	1604	2.50	2754.71	50 ml ethanol/water, 50%/50%			1.900	1.900	82.0
1443	2006-01-14T16:42	41.0	2	1760	3.00	2755.34	70 ml ethanol/water, 50%/50%			1.840	1.840	84.0
FR60	2006-01-15T09:15				5.00	2755.50						86.0
1444	2006-01-15T13:09	83.0	1	1505	5.50	2756.17	100 ml ethanol/water, 50%/50%			2.050	2.050	86.0
1445	2006-01-15T15:27	77.0	2	1635	6.00	2757.06	100 ml ethanol/water, 50%/50%			2.100	2.100	87.0
1446	2006-01-15T20:08	19.0	1	1882		2757.18	100 ml ethanol/water, 50%/50%			1.800	1.800	87.0
1447	2006-01-15T22:55	45.0	1	1650	6.00	2757.78	50 ml ethanol/water, 50%/50%					87.0
1448	2006-01-16T01:20	63.0	1	1538	6.00	2758.76	75 ml ethanol/water, 50%/50%			2.050	2.050	90.0
1449	2006-01-16T04:00	80.0	6	1934	5.50	2759.59	75 ml ethanol/water, 50%/50%					93.0
1450	2006-01-16T07:40	11.0	1	1654	1.00	2759.36	75 ml ethanol/water, 50%/50%					94.0
1451	2006-01-16T10:10	53.0	2	1820	7.00	2759.80				1.770	1.770	91.0	0.410	830.0	-23.0
1452	2006-01-16T13:50	17.0	1	1404	3.00	2759.97						80.0
1453	2006-01-16T16:45	15.0	1	1375	3.00	2759.90	75 ml ethanol/water, 50%/50%; changed to pump					81.0
1454	2006-01-16T20:15	26.0	1	874	4.50	2760.35						82.0
1455	2006-01-16T23:40	14.0	1	911	5.00	2760.90						82.0
1456	2006-01-17T03:55	52.0	2	1389	5.00	2761.77	220 ml ethanol/water, 50%/50%; changed to booster					84.0
1457	2006-01-17T07:35	6.0	1	1895		2761.35	250 ml ethanol/water, 50%/50%					85.0
1458	2006-01-17T11:54			1188		2756.23	500 ml ethanol/water, 50%/50%; shortage - very short core piece not measurable					80.0
FR61	2006-01-17T15:00					2180.00	bailer - aborted due to shortage
FR62	2006-01-17T18:20					2760.09	bailer - heavily iced at bottom					80.0
1459	2006-01-17T21:55					2757.86	no penetration					85.0
1460	2006-01-18T02:30					2756.89						81.0	0.151	830.0	-23.0