Lefebvre, Alice; Paarlberg, Andries J; Winter, Christian (2014): (Table 2) Flow conditions and bed form dimensions used for the numerical experiments [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.834773, In supplement to: Lefebvre, A et al. (2014): Flow separation and shear stress over angle-of-repose bed forms: A numerical investigation. Water Resources Research, 50(2), 986-1005, https://doi.org/10.1002/2013WR014587
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Comment:
Geocode: depth, water = mean water depth
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Experiment | Exp | Lefebvre, Alice | |||
| 2 | DEPTH, water | Depth water | m | Geocode | ||
| 3 | Flow velocity, water | Vel water | m/s | Lefebvre, Alice | Delft3D modeling system | |
| 4 | Froude number, internal | Fi | Lefebvre, Alice | Delft3D modeling system | ||
| 5 | Roughness length | Z0 | m | Lefebvre, Alice | Delft3D modeling system | |
| 6 | Bedform height | Bf h | m | Lefebvre, Alice | Delft3D modeling system | |
| 7 | Bedform length | Bf l | m | Lefebvre, Alice | Delft3D modeling system | |
| 8 | Bedform height, relative | Hb/h | Lefebvre, Alice | Delft3D modeling system | ||
| 9 | Aspect ratio | Aspect ratio | Lefebvre, Alice | Delft3D modeling system | ||
| 10 | Length separation zone | Lst L0 | Lefebvre, Alice | Delft3D modeling system | ||
| 11 | Angle | Angle | deg | Lefebvre, Alice | Delft3D modeling system | |
| 12 | Velocity, normalized | Vp norm | % | Lefebvre, Alice | Delft3D modeling system | |
| 13 | Rate of kinetic energy dissipation | Diss | m2/s2 | Lefebvre, Alice | Delft3D modeling system | in the wake region |
| 14 | Wake extend, normalized | Ext norm | Lefebvre, Alice | Delft3D modeling system | of the wake | |
| 15 | Shear stress | Tau | kPa | Lefebvre, Alice | Delft3D modeling system |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
504 data points