Adamson, Andrew C (1983): (Table 3) Effect of oxidation state of iron on graphical parameter at DSDP Hole 69-504B [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.816434, In supplement to: Adamson, AC (1983): Chemistry of alteration minerals from Deep Sea Drilling Project Sites 501, 504, and 505. In: Cann, JR; Langseth, MG; Honnorez, J; Von Herzen, RP; White, SM; et al. (eds.), Initial Reports of the Deep Sea Drilling Project (U.S. Govt. Printing Office), 69, 551-563, https://doi.org/10.2973/dsdp.proc.69.128.1983
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 1.227200 * Longitude: -83.730200
Date/Time Start: 1979-10-07T00:00:00 * Date/Time End: 1979-10-07T00:00:00
Minimum Elevation: -3460.0 m * Maximum Elevation: -3460.0 m
Event(s):
69-504B * Latitude: 1.227200 * Longitude: -83.730200 * Date/Time: 1979-10-07T00:00:00 * Elevation: -3460.0 m * Penetration: 489 m * Recovery: 262 m * Campaign: Leg69 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL)
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | Sample code/label | Sample label | Adamson, Andrew C | DSDP/ODP/IODP sample designation | ||
2 | Type | Type | Adamson, Andrew C | |||
3 | Sample method | Sample method | Adamson, Andrew C | |||
4 | Comment | Comment | Adamson, Andrew C | |||
5 | Silicon dioxide | SiO2 | % | Adamson, Andrew C | see sample method | |
6 | Titanium dioxide | TiO2 | % | Adamson, Andrew C | see sample method | |
7 | Aluminium oxide | Al2O3 | % | Adamson, Andrew C | see sample method | |
8 | Iron oxide, Fe2O3 | Fe2O3 | % | Adamson, Andrew C | see sample method | |
9 | Iron oxide, FeO | FeO | % | Adamson, Andrew C | see sample method | |
10 | Manganese oxide | MnO | % | Adamson, Andrew C | see sample method | |
11 | Magnesium oxide | MgO | % | Adamson, Andrew C | see sample method | |
12 | Calcium oxide | CaO | % | Adamson, Andrew C | see sample method | |
13 | Sodium oxide | Na2O | % | Adamson, Andrew C | see sample method | |
14 | Potassium oxide | K2O | % | Adamson, Andrew C | see sample method | |
15 | Total | Total | % | Adamson, Andrew C | see sample method | |
16 | Silicon | Si | # of ions | Adamson, Andrew C | see sample method | |
17 | Aluminium | Al | # of ions | Adamson, Andrew C | see sample method | #1 |
18 | Aluminium | Al | # of ions | Adamson, Andrew C | see sample method | #2 |
19 | Titanium | Ti | # of ions | Adamson, Andrew C | see sample method | |
20 | Iron 3+ | Fe3+ | # of ions | Adamson, Andrew C | see sample method | |
21 | Iron 2+ | Fe2+ | # of ions | Adamson, Andrew C | see sample method | |
22 | Magnesium | Mg | # of ions | Adamson, Andrew C | see sample method | |
23 | Manganese | Mn | # of ions | Adamson, Andrew C | see sample method | |
24 | Calcium | Ca | # of ions | Adamson, Andrew C | see sample method | |
25 | Sodium | Na | # of ions | Adamson, Andrew C | see sample method | |
26 | Potassium | K | # of ions | Adamson, Andrew C | see sample method | |
27 | Cations | Cat | # | Adamson, Andrew C | SAMPF = Si + Al + Mg + Fe-total | |
28 | Cations | Cat | # | Adamson, Andrew C | Total Al + Fe**3+ | |
29 | Aluminium | Al | # of ions | Adamson, Andrew C | Total | |
30 | Cations | Cat | # | Adamson, Andrew C | Monovalent ions - exchangeable inter-layer cations | |
31 | Cations | Cat | # | Adamson, Andrew C | Mg + Fe**2+ |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
138 data points
Data
1 Sample label (DSDP/ODP/IODP sample designation) | 2 Type | 3 Sample method | 4 Comment | 5 SiO2 [%] (see sample method) | 6 TiO2 [%] (see sample method) | 7 Al2O3 [%] (see sample method) | 8 Fe2O3 [%] (see sample method) | 9 FeO [%] (see sample method) | 10 MnO [%] (see sample method) | 11 MgO [%] (see sample method) | 12 CaO [%] (see sample method) | 13 Na2O [%] (see sample method) | 14 K2O [%] (see sample method) | 15 Total [%] (see sample method) | 16 Si [# of ions] (see sample method) | 17 Al [# of ions] (#1, see sample method) | 18 Al [# of ions] (#2, see sample method) | 19 Ti [# of ions] (see sample method) | 20 Fe3+ [# of ions] (see sample method) | 21 Fe2+ [# of ions] (see sample method) | 22 Mg [# of ions] (see sample method) | 23 Mn [# of ions] (see sample method) | 24 Ca [# of ions] (see sample method) | 25 Na [# of ions] (see sample method) | 26 K [# of ions] (see sample method) | 27 Cat [#] (SAMPF = Si + Al + Mg + Fe-total) | 28 Cat [#] (Total Al + Fe**3+) | 29 Al [# of ions] (Total) | 30 Cat [#] (Monovalent ions - exchangeabl...) | 31 Cat [#] (Mg + Fe**2+) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
69-504B-6-1,33-34 | Microprobe | 48.8 | 0.35 | 8.76 | 0.0 | 10.1 | 0.12 | 17.58 | 4.49 | 1.88 | 0.16 | 92.97 | 6.90 | 1.10 | 0.36 | 0.04 | 1.26 | 3.70 | 0.01 | 0.68 | 0.51 | 0.03 | 13.32 | 1.46 | 1.46 | 1.90 | 4.96 | |||
69-504B-6-1,33-34 | R minerals - 3 | Wet Chemical | 5.2 | 4.9 | 6.86 | 1.14 | 0.31 | 0.03 | 0.55 | 0.57 | 3.68 | 0.02 | 0.67 | 0.51 | 0.03 | 13.11 | 2.00 | 1.45 | 1.88 | 4.25 | ||||||||||
69-504B-29-1,11-14 | Microprobe | Total iron is assumed to be Fe**2+ or Fe**3+ | 49.1 | 0.00 | 11.24 | 0.0 | 11.0 | 0.00 | 17.38 | 1.63 | 1.20 | 0.15 | 91.63 | 6.92 | 1.08 | 0.79 | 1.29 | 3.65 | 0.25 | 0.33 | 0.03 | 13.70 | 1.87 | 1.87 | 0.85 | 4.94 | ||||
69-504B-29-1,11-14 | Montmorillonite-like minerals - 2 | Microprobe | Total iron is assumed to be Fe**2+ or Fe**3+ | 11.0 | 6.78 | 1.22 | 0.60 | 1.14 | 3.58 | 0.24 | 0.31 | 0.02 | 13.32 | 2.96 | 1.82 | 0.81 | 3.58 | |||||||||||||
69-504B-7-3,27-30 | Microprobe | Total iron is assumed to be Fe**2+ or Fe**3+ | 49.2 | 0.00 | 3.93 | 0.0 | 10.0 | 0.00 | 21.05 | 0.58 | 0.57 | 0.74 | 86.13 | 7.38 | 0.62 | 0.07 | 1.26 | 4.70 | 0.09 | 0.16 | 0.14 | 14.03 | 0.69 | 0.69 | 0.49 | 5.96 | ||||
69-504B-7-3,27-30 | Saponite - 1 | Microprobe | Total iron is assumed to be Fe**2+ or Fe**3+ | 10.0 | 7.24 | 0.67 | 1.11 | 4.61 | 0.09 | 0.16 | 0.14 | 13.63 | 1.78 | 0.67 | 0.48 | 13.63 |