Housden, J; Tucker, Peter; O'Reilly, W (1984): (Table 3) Magnetic properties at DSDP Leg 73 Holes [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.811205, In supplement to: Housden, J et al. (1984): A magneto-mineralogical study of basalt samples from Holes 519A, 522B, and 524, Leg 73 of the Deep Sea Drilling Project. In: Hsü, KJ; LaBrecque, JL; et al. (eds.), Initial Reports of the Deep Sea Drilling Project (U.S. Govt. Printing Office), 73, 687-698, https://doi.org/10.2973/dsdp.proc.73.130.1984
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Median Latitude: -27.244967 * Median Longitude: -4.427867 * South-bound Latitude: -29.484200 * West-bound Longitude: -11.666200 * North-bound Latitude: -26.114000 * East-bound Longitude: 3.512300
Date/Time Start: 1980-04-22T00:00:00 * Date/Time End: 1980-05-21T00:00:00
Minimum Elevation: -4796.0 m * Maximum Elevation: -3769.0 m
Event(s):
73-519A * Latitude: -26.136700 * Longitude: -11.666200 * Date/Time: 1980-04-22T00:00:00 * Elevation: -3769.0 m * Penetration: 180 m * Recovery: 61.4 m * Location: South Atlantic/RIDGE * Campaign: Leg73 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 9 cores; 84.5 m cored; 0 m drilled; 72.7 % recovery
73-522B * Latitude: -26.114000 * Longitude: -5.129700 * Date/Time: 1980-05-06T00:00:00 * Elevation: -4441.0 m * Penetration: 170.4 m * Recovery: 26 m * Location: South Atlantic/PLATEAU * Campaign: Leg73 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 6 cores; 40.5 m cored; 0 m drilled; 64.2 % recovery
73-524 * Latitude: -29.484200 * Longitude: 3.512300 * Date/Time: 1980-05-21T00:00:00 * Elevation: -4796.0 m * Penetration: 348.5 m * Recovery: 200.3 m * Location: South Atlantic/CANYON * Campaign: Leg73 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 35 cores; 306.5 m cored; 0 m drilled; 65.3 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | Event label | Event | ||||
2 | Latitude of event | Latitude | ||||
3 | Longitude of event | Longitude | ||||
4 | Elevation of event | Elevation | m | |||
5 | Sample code/label | Sample label | Housden, J | DSDP/ODP/IODP sample designation | ||
6 | Natural remanent magnetization | NRM | µA*m2/kg | Housden, J | ||
7 | Hysteresis, saturation remanence | Mrs | mA m2/kg | Housden, J | ||
8 | Ratio | Ratio | Housden, J | Natural remanent magnetization/Hysteresis, saturation remanence ratio | ||
9 | Median destructive field | MDF | kA/m | Housden, J | ||
10 | Hysteresis, saturation magnetization | Ms | mA m2/kg | Housden, J | ||
11 | Coercivity | Hc | kA/m | Housden, J | ||
12 | Coercivity of remanence/coercive force | Bcr/Bc | Housden, J | |||
13 | Magnetic susceptibility | MAGS | m3/kg | Housden, J | High-field | |
14 | Magnetic susceptibility | MAGS | m3/kg | Housden, J | Low-field | |
15 | Koenigsberger ratio | Q-ratio | A/m | Housden, J | ||
16 | Basalt | Basalt | Housden, J |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
319 data points
Data
1 Event | 2 Latitude | 3 Longitude | 4 Elevation [m] | 5 Sample label | 6 NRM [µA*m2/kg] | 7 Mrs [mA m2/kg] | 8 Ratio (Natural remanent magnetizatio...) | 9 MDF [kA/m] | 10 Ms [mA m2/kg] | 11 Hc [kA/m] | 12 Bcr/Bc | 13 MAGS [m3/kg] (High-field) | 14 MAGS [m3/kg] (Low-field) | 15 Q-ratio [A/m] | 16 Basalt |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
73-519A | -26.1367 | -11.6662 | -3769 | 73-519A-9-1,11 | 277 | 91.700 | 0.00395 | 22.30 | 195.0 | 19.5 | 0.47 | 1.82E-6 | 7.1 | Flow | |
73-519A | -26.1367 | -11.6662 | -3769 | 73-519A-9-1,27 | 452 | 114.000 | 0.00301 | 15.90 | 193.0 | 20.0 | 0.59 | 1.09E-6 | 19.0 | Flow | |
73-519A | -26.1367 | -11.6662 | -3769 | 73-519A-9-1,80 | 490 | 108.000 | 0.00451 | 9.20 | 256.0 | 11.9 | 0.42 | 294E-9 | 1.3E-6 | 18.0 | Flow |
73-519A | -26.1367 | -11.6662 | -3769 | 73-519A-9-2,29 | 198 | 116.000 | 0.00172 | 6.40 | 300.0 | 11.0 | 0.38 | 252E-9 | 1.32E-6 | 7.0 | Flow |
73-519A | -26.1367 | -11.6662 | -3769 | 73-519A-9-3,145 | 633 | 126.000 | 0.00500 | 8.00 | 294.0 | 10.8 | 0.43 | 316E-9 | 1.44E-6 | 20.0 | Flow |
73-519A | -26.1367 | -11.6662 | -3769 | 73-519A-9-4,40 | 630 | 100.000 | 0.00630 | 7.20 | 393.0 | 7.3 | 0.25 | 300E-9 | 3.5E-6 | 8.4 | Flow |
73-519A | -26.1367 | -11.6662 | -3769 | 73-519A-9-4,84 | 443 | 62.500 | 0.00709 | 3.60 | 413.0 | 4.3 | 0.15 | 275E-9 | 4.61E-6 | 4.5 | Flow |
73-522B | -26.1140 | -5.1297 | -4441 | 73-522B-3-4,61 | 1280 | 115.000 | 0.01110 | 10.30 | 218.0 | 15.4 | 0.48 | 149E-9 | 1.66E-6 | 36.0 | Pillow |
73-522B | -26.1140 | -5.1297 | -4441 | 73-522B-4-1,17 | 1210 | 121.000 | 0.00910 | 3.82 | 593.0 | 5.8 | 0.20 | 175E-9 | 5.55E-6 | 6.9 | Flow |
73-522B | -26.1140 | -5.1297 | -4441 | 73-522B-4-1,43 | 1000 | 100.000 | 0.01940 | 3.26 | 529.0 | 4.1 | 0.20 | 201E-9 | 6.37E-6 | 14.0 | Flow |
73-522B | -26.1140 | -5.1297 | -4441 | 73-522B-5-2,30 | 580 | 66.000 | 0.00880 | 22.40 | 10.4 | 27.8 | 0.61 | 148E-9 | 990E-9 | 28.0 | Flow |
73-522B | -26.1140 | -5.1297 | -4441 | 73-522B-5-2,75 | 3280 | 154.000 | 0.02130 | 5.97 | 524.0 | 8.5 | 0.29 | 182E-9 | 3.41E-6 | 45.0 | Flow |
73-522B | -26.1140 | -5.1297 | -4441 | 73-522B-5-2,139 | 2120 | 121.000 | 0.01750 | 3.34 | 554.0 | 7.4 | 0.21 | 186E-9 | 5.48E-6 | 18.0 | Flow |
73-522B | -26.1140 | -5.1297 | -4441 | 73-522B-5-3,41 | 3550 | 121.000 | 0.02930 | 5.33 | 503.0 | 5.4 | 0.26 | 167E-9 | 4.59E-6 | 36.0 | Flow/sill? |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-29-2,28 | 1240 | 147.000 | 0.08400 | 2.15 | 1270.0 | 3.3 | 0.12 | 208E-9 | 15.1E-6 | 3.8 | Upper sill |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-30-1,141 | 1450 | 172.000 | 0.08400 | 2.07 | 1060.0 | 3.4 | 0.16 | 285E-9 | 12E-6 | 5.7 | Upper sill |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-30-2,52 | 2130 | 221.000 | 0.09600 | 1.52 | 1350.0 | 5.6 | 0.16 | 244E-9 | 15.9E-6 | 6.2 | Upper sill |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-30-2,110 | 2500 | 231.000 | 0.10800 | 1.83 | 1480.0 | 5.4 | 0.15 | 260E-9 | 14.7E-6 | 7.9 | Upper sill |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-31-2,69 | 515 | 0.124 | 0.00012 | 3.58 | 1320.0 | 2.6 | 0.10 | 201E-9 | 15.4E-6 | 1.6 | Upper sill |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-31-2,79 | 3970 | 120.000 | 0.67200 | 1260.0 | 2.6 | 0.09 | 203E-9 | 16.4E-6 | 11.0 | Upper sill | |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-33-2,52 | 2460 | 175.000 | 0.14100 | 1.83 | 980.0 | 5.1 | 0.18 | 204E-9 | 9.0E-6 | 13.0 | Lower sill, central part |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-33-2,98 | 1400 | 176.000 | 0.07900 | 1.51 | 1220.0 | 3.4 | 0.14 | 207E-9 | 13.1E-6 | 4.9 | Lower sill, central part |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-33-3,29 | 506 | 135.000 | 0.03700 | 3.34 | 1250.0 | 2.9 | 0.10 | 216E-9 | 13.3E-6 | 1.8 | Lower sill, central part |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-33-3,100 | 710 | 112.000 | 0.06300 | 4.69 | 1220.0 | 2.5 | 0.09 | 208E-9 | 16.3E-6 | 2.0 | Lower sill, central part |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-33-3,105 | 1710 | 110.000 | 0.27300 | 1240.0 | 2.5 | 0.09 | 214E-9 | 16.7E-6 | 4.7 | Lower sill, central part | |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-33-3,127 | 5720 | 120.000 | 1.09000 | 1230.0 | 2.7 | 0.10 | 241E-9 | 12.7E-6 | 20.0 | Lower sill, central part | |
73-524 | -29.4842 | 3.5123 | -4796 | 73-524-33-3,131 | 946 | 124.000 | 0.07600 | 1.75 | 1210.0 | 2.8 | 0.11 | 209E-9 | 11.3E-6 | 3.8 | Lower sill, central part |