Tucker, Peter (1984): (Table 1) The magnetic hysteresis properties of a turbidite sequence at DSDP Hole 73-524 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.811129, In supplement to: Tucker, P (1984): Magnetic remanence acquisition in Leg 73 sediments. In: Hsü, KJ; LaBrecque, JL; et al. (eds.), Initial Reports of the Deep Sea Drilling Project (U.S. Govt. Printing Office), 73, 663-672, https://doi.org/10.2973/dsdp.proc.73.128.1984
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -29.484200 * Longitude: 3.512300
Date/Time Start: 1980-05-21T00:00:00 * Date/Time End: 1980-05-21T00:00:00
Minimum Elevation: -4796.0 m * Maximum Elevation: -4796.0 m
Event(s):
73-524 * Latitude: -29.484200 * Longitude: 3.512300 * Date/Time: 1980-05-21T00:00:00 * Elevation: -4796.0 m * Penetration: 348.5 m * Recovery: 200.3 m * Location: South Atlantic/CANYON * Campaign: Leg73 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 35 cores; 306.5 m cored; 0 m drilled; 65.3 % recovery
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Sample code/label | Sample label | Tucker, Peter | DSDP/ODP/IODP sample designation | ||
| 2 | Hysteresis, saturation magnetization | Ms | mA m2/kg | Tucker, Peter | ||
| 3 | Coercivity | Hc | kA/m | Tucker, Peter | ||
| 4 | Median destructive field | MDF | kA/m | Tucker, Peter | ||
| 5 | Coercivity of remanence/coercive force | Bcr/Bc | Tucker, Peter | |||
| 6 | Hysteresis, saturation magnetization/ saturation remanence | Mrs/Ms | Tucker, Peter | |||
| 7 | Grain size description | Grain size descr | Tucker, Peter |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
42 data points
Data
| 1 Sample label | 2 Ms [mA m2/kg] | 3 Hc [kA/m] | 4 MDF [kA/m] | 5 Bcr/Bc | 6 Mrs/Ms | 7 Grain size descr |
|---|---|---|---|---|---|---|
| 73-524-11-3,61-63 | 31.03 | 10.8 | 14.0 | 2.31 | 0.26 | Fine |
| 73-524-11-3,66-68 | 33.69 | 10.8 | 13.7 | 2.36 | 0.16 | Medium |
| 73-524-11-3,71-73 | 21.69 | 10.9 | 15.6 | 2.39 | 0.15 | Coarse |
| 73-524-11-3,76-78 | 24.27 | 10.8 | 16.6 | 2.37 | 0.17 | Coarse |
| 73-524-11-3,81-83 | 38.47 | 10.6 | 13.1 | 2.22 | 0.18 | Fine |
| 73-524-11-3,92-94 | 60.99 | 10.8 | 13.0 | 2.19 | 0.14 | Fine |