Felden, Janine; Boetius, Antje (2013): Pore water geochemistry of Håkon Mosby mud volcano sediments measured at station PS74/172-1_PUC-136 (Sample 8, old flow surface). Max-Planck-Institut für Marine Mikrobiologie, PANGAEA, https://doi.org/10.1594/PANGAEA.810920, In supplement to: Ruff, S Emil; Felden, Janine; Gruber-Vodicka, Harald R; Marcon, Yann; Knittel, Katrin; Ramette, Alban; Boetius, Antje (2018): In situ development of a methanotrophic microbiome in deep-sea sediments. The ISME Journal, https://doi.org/10.1038/s41396-018-0263-1
Always quote citation above when using data! You can download the citation in several formats below.
Pore water and turnover rates were determined for surface sediment cores obtained in 2009 and 2010. The pore water was extracted with Rhizons (Rhizon CSS: length 5 cm, pore diameter 0.15 µm; Rhizosphere Research Products, Wageningen, Netherlands) in 1 cm-resolution and immediately fixed in 5% zinc acetate (ZnAc) solution for sulfate, and sulfide analyses. The samples were diluted, filtered and the concentrations measured with non-suppressed anion exchange chromatography (Waters IC-Pak anion exchange column, waters 430 conductivity detector). The total sulfide concentrations (H2S + HS- + S**2-) were determined using the diamine complexation method (doi:10.4319/lo.1969.14.3.0454). Samples for dissolved inorganic carbon (DIC) and alkalinity measurements were preserved by adding 2 µl saturated mercury chloride (HgCl2) solution and stored headspace-free in gas-tight glass vials. DIC and alkalinity were measured using the flow injection method (detector VWR scientific model 1054) (doi:10.4319/lo.1918.104.22.1683). Dissolved sulfide was eliminated prior to the DIC measurement by adding 0.5 M molybdate solution (doi:10.4319/lo.1922.214.171.1241). Nutrient subsamples (10 - 15 ml) were stored at – 20 °C prior to concentration measurements with a Skalar Continuous-Flow Analyzer (doi:10.1002/9783527613984).
Latitude: 72.005200 * Longitude: 14.726228
Date/Time Start: 2009-07-25T04:45:56 * Date/Time End: 2009-07-25T04:45:56
Minimum DEPTH, sediment/rock: 0.005 m * Maximum DEPTH, sediment/rock: 0.115 m
|#||Name||Short Name||Unit||Principal Investigator||Method/Device||Comment|
|2||Sulfide||S2-||µmol/l||Felden, Janine||Photometer, methylene blue (Cline 1969)|
|3||Sulfate||[SO4]2-||mmol/l||Felden, Janine||Ion chromatography|
|4||Carbon, inorganic, dissolved||DIC||mmol/l||Felden, Janine||Flow injection analysis (Hall and Aller 1992)||CO2 + HCO3- + CO32-|
|5||Alkalinity, total||AT||mmol(eq)/l||Felden, Janine||Two-point titration (Edmond 1970)|
|6||Silicate||Si(OH)4||µmol/l||Felden, Janine||Seawater analysis after Grasshoff et al., 1983 (Verlag Chemie GmbH Weinheim)|
|7||Phosphate||[PO4]3-||µmol/l||Felden, Janine||Seawater analysis after Grasshoff et al., 1983 (Verlag Chemie GmbH Weinheim)|
|8||Ammonium||[NH4]+||µmol/l||Felden, Janine||Seawater analysis after Grasshoff et al., 1983 (Verlag Chemie GmbH Weinheim)|
83 data points