Gardner, James V; Dean, Walter E; Wilson, Christine R (1984): (Table 5) Mass accumulation rates for sediment components at DSDP Hole 75-532 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.810143, In supplement to: Gardner, JV et al. (1984): Carbonate and organic-carbon cycles and the history of upwelling at Deep Sea Drilling Project Site 532, Walvis Ridge, South Atlantic Ocean. In: Hay, WW; Sibuet, J-C; et al. (eds.), Initial Reports of the Deep Sea Drilling Project (U.S. Govt. Printing Office), 75, 905-921, https://doi.org/10.2973/dsdp.proc.75.126.1984
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -19.743500 * Longitude: 10.518800
Date/Time Start: 1980-08-20T00:00:00 * Date/Time End: 1980-08-20T00:00:00
Minimum DEPTH, sediment/rock: 8.45 m * Maximum DEPTH, sediment/rock: 228.95 m
Event(s):
75-532 * Latitude: -19.743500 * Longitude: 10.518800 * Date/Time: 1980-08-20T00:00:00 * Elevation: -1331.0 m * Penetration: 250.8 m * Recovery: 232 m * Location: South Atlantic * Campaign: Leg75 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 59 cores; 242.8 m cored; 8 m drilled; 95.6 % recovery
Comment:
Sediment depth is given in mbsf. Wet-bulk density, porosity, and water content are from Site 532 chapter, this volume. Bulk-sediment MAR = [(1 - poros./100) x 2.7] x 100 x (sed. rate). MAR's for CaCO3, Corg, and biogenic SiO2 = bulk-sediment MAR x (%/100) of CaCO3, Corg, and biogenic SiO2, respectively. Percent biogenic SiO2 for each 0.5-m.y. interval were obtained from Dean and Parduhn, 1984 (doi:10.2973/dsdp.proc.75.127.1984). MAR clay is the difference between bulk-sed. MAR and the sum of MAR's for CaCO3, Corg, and biogenic SiO2.
Parameter(s):
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
160 data points
Data
1 Age min [ka] | 2 Age max [ka] | 3 Depth top [m] | 4 Depth bot [m] | 5 Depth sed [m] | 6 WBD [g/cm3] | 7 Poros [% vol] | 8 Water wm [%] | 9 SR [cm/ka] | 10 MAR [g/cm2/ka] | 11 CaCO3 [%] | 12 Acc rate CaCO3 [g/cm2/ka] | 13 TOC [%] | 14 Acc rate TOC [g/cm2/ka] | 15 bSiO2 [%] | 16 Acc rate opal [g/cm2/ka] | 17 Acc rate <2 µm [g/cm2/ka] |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0 | 500 | 0.0 | 16.9 | 8.45 | 1.44 | 73 | 52 | 3.38 | 2.491 | 62.4 | 1.554 | 3.0 | 0.075 | 0.18 | 0.0045 | 0.858 |
500 | 1000 | 16.9 | 39.2 | 28.05 | 1.47 | 73 | 51 | 4.46 | 3.251 | 50.0 | 1.626 | 3.7 | 0.120 | 6.62 | 0.2150 | 1.290 |
1000 | 1500 | 39.2 | 61.2 | 50.20 | 1.43 | 76 | 55 | 4.40 | 2.851 | 38.9 | 1.109 | 3.6 | 0.103 | 12.80 | 0.3650 | 1.274 |
1500 | 2000 | 61.2 | 83.2 | 72.20 | 1.42 | 79 | 57 | 4.40 | 2.495 | 35.0 | 0.873 | 3.7 | 0.092 | 9.20 | 0.2300 | 1.300 |
2000 | 2500 | 83.2 | 105.2 | 94.20 | 1.49 | 75 | 52 | 4.40 | 2.970 | 44.0 | 1.307 | 2.8 | 0.083 | 13.30 | 0.3950 | 1.185 |
2500 | 3000 | 105.2 | 127.6 | 116.40 | 1.50 | 74 | 51 | 4.40 | 3.089 | 36.4 | 1.124 | 3.5 | 0.108 | 11.20 | 0.3460 | 1.511 |
3000 | 3500 | 127.6 | 149.6 | 138.60 | 1.64 | 68 | 42 | 4.40 | 3.802 | 44.6 | 1.696 | 3.0 | 0.114 | 3.24 | 0.1230 | 1.869 |
3500 | 4000 | 149.6 | 181.3 | 165.45 | 1.70 | 65 | 39 | 6.34 | 5.991 | 48.2 | 2.894 | 2.5 | 0.150 | 2.43 | 0.1460 | 2.801 |
4000 | 4500 | 181.3 | 213.1 | 197.20 | 1.71 | 62 | 37 | 6.34 | 6.505 | 54.3 | 3.532 | 2.1 | 0.137 | 0.46 | 0.0300 | 2.806 |
4500 | 5000 | 213.1 | 244.8 | 228.95 | 1.74 | 61 | 36 | 6.34 | 6.676 | 58.0 | 3.872 | 2.2 | 0.147 | 3.15 | 0.2100 | 2.447 |