Ogg, James G (1983): (Appendix) Characteristic directions at DSDP Hole 76-534A [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.809947, Supplement to: Ogg, JG (1983): Magnetostratigraphy of upper Jurassic and lowest Cretaceous sediments, Deep Sea Drilling Project Site 534, western North Atlantic. In: Sheridan, RE; Gradstein, FM; et al. (eds.), Initial Reports of the Deep Sea Drilling Project (U.S. Govt. Printing Office), 76, 685-697, https://doi.org/10.2973/dsdp.proc.76.131.1983
Always quote citation above when using data! You can download the citation in several formats below.
Abstract:
Kimmeridgian-Tithonian red marly limestones and Berriasian white limestones were recovered at Site 534 of DSDP Leg 76 in the western North Atlantic. These yielded a well-defined magnetostratigraphy with the characteristic magnetization carried by hematite in red sediments and magnetite in white sediments. The polarity sequence is correlated to the magnetostratigraphy of Kimmeridgian-Tithonian-Berriasian pelagic carbonates of northern Italy and southern Spain, allowing precise biostratigraphic age correlations. The Berriasian/Tithonian boundary occurs within the upper half of Core 90, the late Tithonian/early Tithonian boundary at the base of Core 96, and the Tithonian/Kimmeridgian boundary at the top of Core 102. Correlations are also made to M-16 through M-22 of the marine magnetic anomaly M-sequence. Poor recovery and irregular magnetic properties of the underlying Kimmeridgian-Oxfordian-Callovian marls and claystones prevented determination of a polarity sequence, but the entire interval has mixed polarity. Valanginian gray marly limestones have very weak magnetizations, and preliminary results are inadequate to determine the polarity pattern.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 28.343300 * Longitude: -75.381700
Date/Time Start: 1980-10-21T00:00:00 * Date/Time End: 1980-10-21T00:00:00
Minimum Elevation: -4971.0 m * Maximum Elevation: -4971.0 m
Event(s):
76-534A * Latitude: 28.343300 * Longitude: -75.381700 * Date/Time: 1980-10-21T00:00:00 * Elevation: -4971.0 m * Penetration: 1666.5 m * Recovery: 612.4 m * Location: North Atlantic/BASIN * Campaign: Leg76 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 127 cores; 1113.1 m cored; 31.5 m drilled; 55 % recovery
Comment:
If the samples did not attain a reliable characteristic direction, the best demagnetization step is given and the inclination value is questionable.
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Sample code/label | Sample label | Ogg, James G | DSDP/ODP/IODP sample designation | ||
| 2 | Inclination | Incl | deg | Ogg, James G | Magnetometer, long-core spinner, Digico | |
| 3 | Intensity | J | 10-6 emu/cm3 | Ogg, James G | Magnetometer, long-core spinner, Digico | |
| 4 | Demagnetization level | Level | °C | Ogg, James G | Magnetometer, long-core spinner, Digico | |
| 5 | Demagnetizing field | Demag field | Oe | Ogg, James G |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
1286 data points
Data
| 1 Sample label | 2 Incl [deg] | 3 J [10-6 emu/cm3] | 4 Level [°C] | 5 Demag field [Oe] |
|---|---|---|---|---|
| 76-534A-49-2,4 | -50.0 | 0.0056 | 350 | |
| 76-534A-53-1,93 | 35.7 | 0.0130 | 300 | |
| 76-534A-56-3,29 | 40.6 | 0.0690 | 300 | |
| 76-534A-59-1,7 | 38.5 | 5.2000 | 300 | |
| 76-534A-61-2,12 | 33.0 | 0.4300 | 300 | |
| 76-534A-63-1,45 | 19.2 | 9.5000 | 300 | |
| 76-534A-64-4,54 | -55.0 | 1.9000 | 250 | |
| 76-534A-66-1,145 | 43.3 | 0.0500 | 300 | |
| 76-534A-66-4,114 | 31.3 | 0.1000 | 300 | |
| 76-534A-67-1,51 | ?-48.0 | 0.0110 | 300 | |
| 76-534A-67-3,33 | ?0.8 | 0.0072 | 350 | |
| 76-534A-68-1,111 | ?53.1 | 0.0080 | 350 | |
| 76-534A-68-4,14 | 33.9 | 0.0210 | 300 | |
| 76-534A-69-1,29 | 25.7 | 0.0110 | 300 | |
| 76-534A-69-5,101 | 60.7 | 0.0200 | 300 | |
| 76-534A-70-1,118 | 48.0 | 0.0110 | 350 | |
| 76-534A-70-5,69 | ?66.0 | 0.0200 | 300 | |
| 76-534A-71-3,99 | ?65.2 | 0.0140 | 300 | |
| 76-534A-71-4,30 | 49.6 | 0.0080 | 300 | |
| 76-534A-72-1,83 | 31.5 | 0.0057 | 250 | |
| 76-534A-72-5,118 | 40.0 | 0.0071 | 350 | |
| 76-534A-73-1,11 | ?58.0 | 0.0100 | 250 | |
| 76-534A-73-4,35 | 42.9 | 0.0073 | 350 | |
| 76-534A-74-2,126 | 36.4 | 0.0200 | 350 | |
| 76-534A-74-6,78 | ?46.4 | 0.0130 | 250 | |
| 76-534A-75-3,99 | -37.0 | 0.0060 | 350 | |
| 76-534A-75-6,45 | ?-21.6 | 0.0031 | 350 | |
| 76-534A-76-1,105 | 57.1 | 0.0085 | 250 | |
| 76-534A-76-2,97 | 28.6 | 0.0330 | 250 | |
| 76-534A-76-3,31 | 52.0 | 0.0066 | 300 | |
| 76-534A-76-4,11 | 29.1 | 0.0220 | 250 | |
| 76-534A-76-5,11 | -60.1 | 0.0092 | 450 | |
| 76-534A-76-5,106 | ?25.3 | 0.0040 | 250 | |
| 76-534A-76-6,85 | 31.2 | 0.0590 | 250 | |
| 76-534A-77-1,40 | 27.5 | 0.0660 | 250 | |
| 76-534A-77-1,93 | 29.2 | 0.0190 | 250 | |
| 76-534A-77-2,83 | 32.1 | 0.0200 | 250 | |
| 76-534A-77-3,22 | 43.6 | 0.0140 | 300 | |
| 76-534A-77-4,30 | 41.6 | 0.0340 | 250 | |
| 76-534A-78-1,97 | 34.7 | 0.0860 | 250 | |
| 76-534A-78-2,31 | ?-48.5 | 0.0063 | 350 | |
| 76-534A-78-2,109 | ?1.9 | 0.0050 | 250 | |
| 76-534A-78-3,21 | -21.4 | 0.0130 | 200 | |
| 76-534A-78-3,130 | 34.1 | 0.0095 | 350 | |
| 76-534A-78-4,38 | ?47.9 | 0.0220 | 300 | |
| 76-534A-78-4,140 | 23.8 | 0.0360 | 350 | |
| 76-534A-78-5,45 | 14.2 | 0.0360 | 250 | |
| 76-534A-78-6,10 | 39.4 | 0.0096 | 250 | |
| 76-534A-79-1,8 | 10.2 | 0.0380 | 250 | |
| 76-534A-79-2,25 | 30.7 | 0.0270 | 300 | |
| 76-534A-79-3,43 | ?21.7 | 0.0048 | 250 | |
| 76-534A-79-4,52 | ?1.8 | 0.5000 | 200 | |
| 76-534A-79-4,136 | 38.3 | 0.0430 | 250 | |
| 76-534A-79-6,45 | ?3.6 | 0.0085 | 350 | |
| 76-534A-80-1,120 | ?38.9 | 0.0039 | 200 | |
| 76-534A-80-2,89 | 68.5 | 0.0110 | 200 | |
| 76-534A-80-3,14 | 25.5 | 0.0240 | 200 | |
| 76-534A-80-3,138 | -41.5 | 0.0100 | 200 | |
| 76-534A-80-5,86 | ?27.1 | 0.0042 | 250 | |
| 76-534A-80-5,132 | 31.4 | 0.0110 | 350 | |
| 76-534A-81-1,89 | ?49.6 | 0.0077 | 250 | |
| 76-534A-81-2,128 | ?43.7 | 0.0064 | 175 | |
| 76-534A-81-3,124 | 44.7 | 0.0130 | 250 | |
| 76-534A-81-4,55 | ?75.1 | 0.0036 | 250 | |
| 76-534A-81-4,147 | ?-37.4 | 0.0023 | 250 | |
| 76-534A-82-1,142 | ?24.5 | 0.0052 | 250 | |
| 76-534A-82-2,20 | 35.1 | 0.0098 | 250 | |
| 76-534A-82-2,66 | ?23.2 | 0.0043 | 175 | |
| 76-534A-83-1,4 | 22.2 | 0.0180 | 250 | |
| 76-534A-83-1,115 | -43.9 | 0.1000 | 250 | |
| 76-534A-83-2,121 | ?-11.6 | 0.0022 | 200 | |
| 76-534A-83-3,72 | 43.4 | 0.0160 | 350 | |
| 76-534A-83-4,15 | 8.9 | 0.0150 | 250 | |
| 76-534A-83-4,110 | 34.5 | 0.1100 | 250 | |
| 76-534A-83-5,98 | 28.7 | 1.9000 | 350 | |
| 76-534A-84-1,14 | 27.7 | 0.8300 | 250 | |
| 76-534A-84-2,34 | -19.6 | 0.0270 | 250 | |
| 76-534A-84-3,27 | -18.7 | 0.0580 | 300 | |
| 76-534A-84-4,30 | -25.9 | 0.1200 | 250 | |
| 76-534A-84-5,23 | -28.9 | 0.1000 | 350 | |
| 76-534A-84-6,32 | -32.4 | 0.2200 | 250 | |
| 76-534A-84-7,34 | 32.1 | 0.0210 | 250 | |
| 76-534A-85-1,13 | 35.9 | 0.0300 | 250 | |
| 76-534A-85-2,30 | 30.7 | 0.0450 | 250 | |
| 76-534A-85-3,21 | ?61.9 | 0.0044 | 250 | |
| 76-534A-85-3,106 | 29.9 | 0.0620 | 350 | |
| 76-534A-85-4,115 | 37.1 | 0.1100 | 250 | |
| 76-534A-85-5,91 | -30.8 | 0.0230 | 250 | |
| 76-534A-86-1,14 | -37.6 | 0.0820 | 250 | |
| 76-534A-86-2,38 | -36.8 | 0.1200 | 250 | |
| 76-534A-86-3,28 | -42.9 | 0.0750 | 300 | |
| 76-534A-86-4,39 | -31.5 | 0.0480 | 350 | |
| 76-534A-86-5,6 | -40.4 | 0.0590 | 250 | |
| 76-534A-87-1,17 | -41.2 | 0.1100 | 350 | |
| 76-534A-87-1,138 | -37.6 | 0.2000 | 350 | |
| 76-534A-87-2,52 | -37.8 | 0.1200 | 350 | |
| 76-534A-87-2,137 | -38.3 | 0.1000 | 350 | |
| 76-534A-87-3,34 | -34.4 | 0.1300 | 350 | |
| 76-534A-87-3,130 | -36.8 | 0.1100 | 400 | |
| 76-534A-87-4,23 | -35.0 | 0.0650 | 350 | |
| 76-534A-87-4,122 | -44.5 | 0.1100 | 350 | |
| 76-534A-87-5,18 | -40.1 | 0.1200 | 400 | |
| 76-534A-87-5,136 | 26.5 | 0.0770 | 400 | |
| 76-534A-87-6,3 | -37.5 | 0.1000 | 350 | |
| 76-534A-88-1,11 | -25.4 | 0.0390 | 350 | |
| 76-534A-88-1,107 | -35.1 | 0.2300 | 350 | |
| 76-534A-88-2,16 | -43.0 | 0.0880 | 350 | |
| 76-534A-88-2,131 | -43.3 | 0.0680 | 350 | |
| 76-534A-88-3,27 | -46.2 | 0.0880 | 350 | |
| 76-534A-88-3,133 | -42.3 | 0.0730 | 350 | |
| 76-534A-88-4,54 | -44.7 | 0.1700 | 350 | |
| 76-534A-88-4,130 | -31.5 | 0.0700 | 350 | |
| 76-534A-88-5,46 | -41.3 | 0.0550 | 350 | |
| 76-534A-88-5,142 | -43.7 | 0.1100 | 350 | |
| 76-534A-88-6,24 | -38.8 | 0.1500 | 400 | |
| 76-534A-89-1,24 | -26.3 | 0.0480 | 400 | |
| 76-534A-89-1,133 | 41.6 | 0.0460 | 400 | |
| 76-534A-89-2,14 | 47.1 | 0.0500 | 350 | |
| 76-534A-89-2,140 | 35.9 | 0.0910 | 350 | |
| 76-534A-89-3,43 | 34.6 | 0.1500 | 350 | |
| 76-534A-89-3,128 | 51.5 | 0.0890 | 350 | |
| 76-534A-89-4,40 | 35.7 | 0.3600 | 350 | |
| 76-534A-89-4,109 | 30.8 | 0.5300 | 400 | |
| 76-534A-89-5,15 | 31.2 | 0.2200 | 400 | |
| 76-534A-89-5,104 | 37.6 | 0.1400 | 400 | |
| 76-534A-89-6,4 | 35.0 | 0.1100 | 400 | |
| 76-534A-90-1,37 | 38.4 | 0.0810 | 400 | |
| 76-534A-90-1,102 | 39.7 | 0.1100 | 400 | |
| 76-534A-90-2,37 | -48.3 | 0.0530 | 400 | |
| 76-534A-90-2,108 | -35.2 | 0.0920 | 400 | |
| 76-534A-90-3,41 | -45.6 | 0.0550 | 400 | |
| 76-534A-90-3,97 | -34.8 | 0.0770 | 400 | |
| 76-534A-90-4,15 | -34.6 | 0.0620 | 400 | |
| 76-534A-90-4,118 | -46.4 | 0.1300 | 400 | |
| 76-534A-90-5,38 | -46.1 | 0.0790 | 400 | |
| 76-534A-90-5,117 | 25.4 | 0.0300 | 400 | |
| 76-534A-91-1,26 | 42.2 | 0.0910 | 400 | |
| 76-534A-91-1,96 | 37.0 | 0.2100 | 400 | |
| 76-534A-91-2,22 | 32.1 | 0.5900 | 400 | |
| 76-534A-91-2,97 | -31.6 | 0.7100 | 400 | |
| 76-534A-91-3,8 | 45.6 | 0.0840 | 400 | |
| 76-534A-91-3,109 | 41.4 | 0.0890 | 450 | |
| 76-534A-91-4,21 | 39.3 | 0.1200 | 400 | |
| 76-534A-91-4,118 | 43.8 | 0.0850 | 400 | |
| 76-534A-91-5,35 | 38.9 | 0.0670 | 400 | |
| 76-534A-91-5,108 | 35.9 | 0.0730 | 350 | |
| 76-534A-91-6,31 | 40.7 | 0.0820 | 400 | |
| 76-534A-92-1,19 | 31.0 | 0.3000 | 400 | |
| 76-534A-92-1,119 | 28.2 | 0.6800 | 400 | |
| 76-534A-92-2,16 | 30.4 | 0.7100 | 400 | |
| 76-534A-92-2,79 | 45.4 | 0.1400 | 400 | |
| 76-534A-92-2,143 | 33.8 | 0.3500 | 400 | |
| 76-534A-92-3,40 | 35.4 | 0.8900 | 400 | |
| 76-534A-92-3,115 | 31.2 | 0.4300 | 400 | |
| 76-534A-92-4,6 | 27.1 | 0.7900 | 400 | |
| 76-534A-92-4,56 | 26.8 | 1.3000 | 400 | |
| 76-534A-92-4,140 | 26.3 | 0.5700 | 400 | |
| 76-534A-92-5,34 | 26.9 | 0.6900 | 400 | |
| 76-534A-92-5,89 | 39.4 | 0.1600 | 400 | |
| 76-534A-92-5,132 | 39.5 | 0.4600 | 300 | 400 |
| 76-534A-92-6,8 | 36.0 | 0.2000 | 400 | |
| 76-534A-92-6,56 | ?18.9 | 0.0460 | 400 | |
| 76-534A-93-1,131 | 38.1 | 0.0720 | 300 | 400 |
| 76-534A-93-2,16 | 37.6 | 0.4800 | 400 | |
| 76-534A-93-2,66 | 44.0 | 0.0190 | 400 | |
| 76-534A-93-2,131 | 31.9 | 0.4500 | 400 | |
| 76-534A-93-3,29 | 40.0 | 0.3200 | 400 | |
| 76-534A-93-3,127 | 33.2 | 0.0430 | 400 | |
| 76-534A-93-4,14 | 31.1 | 1.2000 | 400 | |
| 76-534A-93-4,47 | 27.1 | 0.7700 | 400 | |
| 76-534A-94-1,17 | 35.8 | 0.5300 | 400 | |
| 76-534A-94-1,93 | 28.9 | 0.2300 | 400 | |
| 76-534A-94-2,9 | 22.7 | 4.9000 | 400 | |
| 76-534A-94-2,77 | 29.5 | 2.5000 | 400 | |
| 76-534A-94-2,135 | 39.9 | 87.0000 | 400 | |
| 76-534A-94-3,46 | -29.5 | 0.2300 | 400 | |
| 76-534A-94-3,124 | 20.6 | 0.8200 | 300 | 400 |
| 76-534A-94-4,7 | -31.9 | 0.5200 | 400 | |
| 76-534A-94-4,77 | -37.4 | 0.3000 | 400 | |
| 76-534A-95-1,15 | -43.4 | 0.6000 | 400 | |
| 76-534A-95-1,71 | -17.5 | 1.3000 | 400 | |
| 76-534A-95-2,65 | 22.7 | 0.7400 | 300 | 400 |
| 76-534A-95-2,120 | -38.7 | 1.2000 | 400 | |
| 76-534A-95-3,6 | 31.7 | 1.4000 | 400 | |
| 76-534A-95-3,73 | 44.4 | 0.0480 | 400 | |
| 76-534A-95-3,133 | 24.5 | 0.1400 | 400 | |
| 76-534A-95-4,26 | 22.3 | 0.6900 | 400 | |
| 76-534A-95-4,116 | 23.5 | 1.1000 | 400 | |
| 76-534A-95-5,38 | 24.1 | 3.9000 | 400 | |
| 76-534A-96-1,9 | 23.1 | 3.1000 | 400 | |
| 76-534A-96-1,106 | 24.5 | 3.4000 | 400 | |
| 76-534A-96-2,7 | 24.8 | 1.1000 | 400 | |
| 76-534A-96-2,101 | -19.1 | 1.3000 | 400 | |
| 76-534A-96-3,40 | -23.7 | 0.1800 | 400 | |
| 76-534A-96-3,103 | -23.7 | 0.3500 | 400 | |
| 76-534A-96-4,14 | -21.0 | 2.1000 | 400 | |
| 76-534A-96-4,80 | -17.7 | 3.7000 | 400 | |
| 76-534A-96-5,39 | -30.6 | 0.6700 | 300 | 400 |
| 76-534A-97-1,20 | 11.1 | 0.7300 | 400 | |
| 76-534A-97-1,34 | 17.7 | 1.6000 | 400 | |
| 76-534A-98-0,2 | 30.9 | 3.0000 | 400 | |
| 76-534A-99-1,21 | 22.0 | 3.7000 | 400 | |
| 76-534A-99-1,91 | 36.1 | 0.4100 | 450 | |
| 76-534A-99-2,41 | 28.9 | 2.7000 | 400 | |
| 76-534A-99-2,119 | 18.3 | 4.2000 | 450 | |
| 76-534A-99-3,67 | 27.8 | 4.6000 | 450 | |
| 76-534A-99-4,29 | 22.5 | 1.9000 | 400 | |
| 76-534A-100-1,106 | 20.9 | 3.0000 | 400 | |
| 76-534A-100-2,38 | 33.3 | 1.6000 | 450 | |
| 76-534A-100-3,36 | 22.0 | 2.9000 | 400 | |
| 76-534A-100-3,133 | 27.4 | 2.4000 | 450 | |
| 76-534A-100-4,13 | 24.7 | 4.2000 | 400 | |
| 76-534A-100-4,102 | ?-8.0 | 0.4500 | 550 | |
| 76-534A-101-1,30 | 28.4 | 3.3000 | 400 | |
| 76-534A-101-2,28 | ?-15.5 | 5.5000 | 550 | |
| 76-534A-101-3,42 | ?4.3 | 1.2000 | 500 | |
| 76-534A-101-3,110 | ?-1.7 | 1.8000 | 580 | |
| 76-534A-101-4,139 | -14.2 | 2.6000 | 550 | |
| 76-534A-101-5,50 | ?-0.1 | 7.2000 | 550 | |
| 76-534A-101-5,133 | ?25.3 | 0.3800 | 500 | |
| 76-534A-102-1,39 | -10.4 | 2.2000 | 500 | |
| 76-534A-102-1,139 | ?-1.9 | 1.9000 | 550 | |
| 76-534A-102-2,17 | 15.0 | 8.3000 | 500 | |
| 76-534A-102-2,105 | 21.4 | 15.0000 | 450 | |
| 76-534A-102-3,19 | ?0.9 | 1.3000 | 500 | |
| 76-534A-102-4,21 | 11.3 | 5.3000 | 500 | |
| 76-534A-102-4,98 | ?-4.7 | 1.3000 | 550 | |
| 76-534A-102-5,32 | 16.6 | 1.7000 | 550 | |
| 76-534A-102-5,123 | ?7.4 | 1.2000 | 500 | |
| 76-534A-103-1,16 | 23.0 | 4.7000 | 500 | |
| 76-534A-103-1,71 | ?-5.8 | 16.0000 | 550 | |
| 76-534A-103-1,129 | -29.5 | 0.1000 | 400 | |
| 76-534A-104-1,5 | -29.8 | 0.1700 | 400 | |
| 76-534A-104,1137 | -23.0 | 0.2300 | 350 | |
| 76-534A-104-2,10 | -26.5 | 0.0740 | 400 | |
| 76-534A-104-2,82 | -28.9 | 0.9400 | 350 | |
| 76-534A-104-3,5 | -29.2 | 0.0750 | 350 | |
| 76-534A-104-3,111 | -35.9 | 0.3000 | 350 | |
| 76-534A-104-4,7 | -11.8 | 15.0000 | 460 | |
| 76-534A-104-4,80 | -24.8 | 0.6100 | 400 | |
| 76-534A-104-5,6 | 21.3 | 5.2000 | 400 | |
| 76-534A-105-1,6 | 43.6 | 0.7300 | 350 | |
| 76-534A-105-1,60 | -31.2 | 0.9300 | 350 | |
| 76-534A-105-1,142 | -22.4 | 0.0210 | 350 | |
| 76-534A-105-2,39 | ?-2.7 | 0.0092 | 350 | |
| 76-534A-105-2,132 | -41.4 | 0.0140 | 350 | |
| 76-534A-105-1,14 | -41.1 | 0.0320 | 350 | |
| 76-534A-106-1,72 | -32.6 | 0.0260 | 350 | |
| 76-534A-106-1,127 | -22.4 | 0.1700 | 350 | |
| 76-534A-106-2,29 | -40.8 | 0.0890 | 350 | |
| 76-534A-106-2,79 | -33.5 | 0.0180 | 350 | |
| 76-534A-107-1,12 | -22.8 | 0.0120 | 500 | |
| 76-534A-107-1,96 | -42.3 | 0.0550 | 350 | |
| 76-534A-107-2,19 | -18.5 | 0.0270 | 500 | |
| 76-534A-108-1,12 | -10.0 | 0.1800 | 400 | |
| 76-534A-108-1,70 | ?-3.9 | 1.0000 | 520 | |
| 76-534A-108-1,108 | 20.7 | 2.6000 | 500 | |
| 76-534A-109-1,10 | 25.0 | 0.0360 | 400 | |
| 76-534A-110-1,8 | 16.1 | 0.8200 | 400 | |
| 76-534A-111-1,2 | ?-1.8 | 0.0660 | 500 | |
| 76-534A-111-1,19 | -26.8 | 0.8700 | 500 | |
| 76-534A-112-1,13 | -24.3 | 1.1000 | 490 | |
| 76-534A-112-1,79 | -14.9 | 0.0160 | 500 | |
| 76-534A-113-1,10 | 12.1 | 0.0560 | 500 | |
| 76-534A-113-1,68 | ?56.7 | 0.3800 | 500 | |
| 76-534A-114-1,70 | 26.9 | 0.2800 | 500 | |
| 76-534A-114-2,22 | ?-6.8 | 0.3300 | 500 | |
| 76-534A-115-1,26 | 29.8 | 0.1400 | 500 | |
| 76-534A-115-1,90 | ?51.6 | 1.1000 | 500 | |
| 76-534A-116-1,71 | -34.6 | 0.6500 | 400 | |
| 76-534A-117-1,18 | 21.6 | 2.5000 | 400 | |
| 76-534A-117-1,38 | ?-35.5 | 0.0049 | 350 | |
| 76-534A-118-1,70 | ?28.6 | 0.0440 | 400 | |
| 76-534A-118-1,95 | 27.7 | 0.0088 | 400 | |
| 76-534A-119-1,108 | 11.3 | 0.8100 | 400 | |
| 76-534A-120-1,56 | ?45.4 | 2.3000 | 500 | |
| 76-534A-121-1,22 | ?12.3 | 0.0094 | 400 | |
| 76-534A-122-1,13 | ?-18.4 | 0.2100 | 400 | |
| 76-534A-122-1,126 | 28.9 | 0.1000 | 450 | |
| 76-534A-122-2,29 | ?51.2 | 0.1700 | 450 | |
| 76-534A-122-2,102 | -21.5 | 0.0290 | 430 | |
| 76-534A-123-1,126 | ?-21.6 | 0.1100 | 450 | |
| 76-534A-123-2,68 | ?44.2 | 0.2800 | 450 | |
| 76-534A-123-3,129 | ?41.0 | 0.1000 | 450 | |
| 76-534A-123-3,130 | ?51.8 | 0.0970 | 450 | |
| 76-534A-123-4,64 | 35.3 | 0.3300 | 350 | |
| 76-534A-123-4,113 | ?65.5 | 0.2100 | 350 | |
| 76-534A-124-1,12 | ?70.7 | 0.4200 | 450 | |
| 76-534A-124-1,49 | ?-1.5 | 0.1100 | 450 | |
| 76-534A-124-1,82 | ?65.5 | 0.2100 | 350 | |
| 76-534A-124-2,16 | ?7.6 | 0.2300 | 450 | |
| 76-534A-124-2,30 | 29.3 | 0.0980 | 350 | |
| 76-534A-125-1,45 | ?66.4 | 1.1000 | 350 | |
| 76-534A-125-1,124 | 37.7 | 1.4000 | 450 | |
| 76-534A-125-2,36 | 31.3 | 0.2800 | 430 | |
| 76-534A-125-2,124 | 22.6 | 0.4900 | 400 | 500 |
| 76-534A-125-3,29 | ?-59.4 | 1.4000 | 350 | |
| 76-534A-125-3,110 | ?-51.1 | 0.1800 | 450 | |
| 76-534A-125-4,12 | ?67.6 | 0.1400 | 350 | |
| 76-534A-125-4,136 | ?54.9 | 0.7800 | 350 | |
| 76-534A-125-5,20 | ?55.6 | 0.8100 | 350 | |
| 76-534A-125-6,6 | ?45.1 | 0.5600 | 350 | |
| 76-534A-125-6,89 | ?47.2 | 0.1700 | 300 | |
| 76-534A-126-1,9 | -22.9 | 0.0840 | 400 | |
| 76-534A-126-1,97 | ?58.5 | 1.5000 | 300 | |
| 76-534A-126-1,132 | ?50.8 | 0.7400 | 300 | |
| 76-534A-126-2,35 | ?53.4 | 0.0630 | 300 | |
| 76-534A-126-2,60 | ?60.9 | 0.3100 | 300 | |
| 76-534A-126-2,122 | -17.3 | 0.0820 | 450 | |
| 76-534A-126-3,77 | ?50.4 | 10.0000 | 300 | |
| 76-534A-126-3,108 | 14.8 | 18.0000 | 450 | |
| 76-534A-126-4,6 | ?41.8 | 33.0000 | 300 | |
| 76-534A-127-1,24 | ?1.2 | 3.4000 | 570 | |
| 76-534A-127-1,92 | ?85.9 | 4.6000 | 430 | |
| 76-534A-127-2,11 | ?27.1 | 0.4400 | 300 | |
| 76-534A-127-2,74 | ?25.0 | 24.0000 | 300 | |
| 76-534A-127-3,16 | ?63.2 | 24.0000 | 300 | |
| 76-534A-127-3,58 | ?4.5 | 4.7000 | 450 | |
| 76-534A-127-3,115 | ?69.9 | 81.0000 | 300 | |
| 76-534A-127-4,10 | ?21.8 | 25.0000 | 300 |