Facey, D; Housden, J; O'Reilly, W (1985): (Table 2) Grain sizes and minerals at DSDP Hole 83-504B [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.805182, In supplement to: Facey, D et al. (1985): A magneto-petrological study of rocks from Leg 83, Hole 504B, Deep Sea Drilling Project. In: Anderson, RN; Honnorez, J; Becker, K; et al. (eds.), Initial Reports of the Deep Sea Drilling Project, Washington (U.S. Govt. Printing Office), 83, 339-346, https://doi.org/10.2973/dsdp.proc.83.117.1985
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 1.227200 * Longitude: -83.730200
Date/Time Start: 1981-11-22T00:00:00 * Date/Time End: 1982-01-02T00:00:00
Minimum Elevation: -3460.0 m * Maximum Elevation: -3460.0 m
Event(s):
83-504B * Latitude: 1.227200 * Longitude: -83.730200 * Date/Time Start: 1981-11-22T00:00:00 * Date/Time End: 1982-01-02T00:00:00 * Elevation: -3460.0 m * Penetration: 1350 m * Recovery: 107.7 m * Campaign: Leg83 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: Leg 83 of DSDP was devoted entirely to coring and experiments in Hole 504B, the deepest borehole to date into the oceanic crust. Hole 504B now extends over a kilometer into basement, nearly twice as far as any other DSDP hole, and it is the only DSDP hole to have clearly penetrated into the intrusive sheeted dikes that underlie the extrusive pillow lavas of the upper oceanic crust. At Hole 504B, Leg 83 continued an ongoing DSDP effort that began during Legs 68, 69, and 70 in 1979, and also included part of Leg 92 in 1983. 71 cores; 514 m cored; 0 m drilled; 21 % recovery
Comment:
# = relict grains.
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Sample code/label | Sample label | Facey, D | DSDP/ODP/IODP sample designation | ||
| 2 | Identification | ID | Facey, D | |||
| 3 | Size | Size | µm | Facey, D | Optical microscopy | Matrix size, plagioclase lath |
| 4 | Size | Size | µm | Facey, D | Optical microscopy | Matrix size, average |
| 5 | Size | Size | µm | Facey, D | Optical microscopy | Titanomagnetite grain size, minimum |
| 6 | Size | Size | µm | Facey, D | Optical microscopy | Titanomagnetite grain size, maximum |
| 7 | Size | Size | µm | Facey, D | Optical microscopy | Titanomagnetite grain size, average |
| 8 | Size | Size | µm | Facey, D | Optical microscopy | Sulfides, minimum |
| 9 | Size | Size | µm | Facey, D | Optical microscopy | Sulfides, maximum |
| 10 | Opaque minerals | Opaque | % | Facey, D | Optical microscopy | |
| 11 | Titanomagnetite | Timag | % | Facey, D | Optical microscopy | Split of opaques |
| 12 | Sulfide minerals | Sulf | % | Facey, D | Optical microscopy | Split of opaques |
| 13 | Parameter | Parameter | Facey, D | see reference(s) | Low-temperature titanomagnetite oxidation number | |
| 14 | x | x | Facey, D | Electron Probe Microanalysis (EPMA) | EPMA composition | |
| 15 | z | z | Facey, D | Electron Probe Microanalysis (EPMA) | EPMA composition |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
368 data points
Data
| 1 Sample label (DSDP/ODP/IODP sample designation) | 2 ID | 3 Size [µm] (Matrix size, plagioclase lath...) | 4 Size [µm] (Matrix size, average, Optical...) | 5 Size [µm] (Titanomagnetite grain size, m...) | 6 Size [µm] (Titanomagnetite grain size, m...) | 7 Size [µm] (Titanomagnetite grain size, a...) | 8 Size [µm] (Sulfides, minimum, Optical mi...) | 9 Size [µm] (Sulfides, maximum, Optical mi...) | 10 Opaque [%] (Optical microscopy) | 11 Timag [%] (Split of opaques, Optical mic...) | 12 Sulf [%] (Split of opaques, Optical mic...) | 13 Parameter (Low-temperature titanomagneti...) | 14 x (EPMA composition, Electron Pr...) | 15 z (EPMA composition, Electron Pr...) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 83-504B-71-1,130-132 | 1 | 600 | 10 | <1 | 10 | 3 | <1 | 6 | 1.5 | 99.0 | 1.0 | 3- | ||
| 83-504B-72-2,61-63 | 2 | 600 | 40 | <1 | 20 | 3 | <1 | 400 | 1.4 | >99.9 | <0.1 | 3 | 0.68 | |
| 83-504B-73-1,15-17 | 3 | 600 | 100 | <1 | 30 | 5 | <1 | 1000 | 1.8 | >99.9 | <0.1 | 2+ | 0.51 | 0.8 |
| 83-504B-73-2,13-15 | 4 | 600 | 150 | <1 | 15 | 3 | <1 | 15 | 2.0 | 90.0 | 10.0 | 2+ | 0.61 | 0.6 |
| 83-504B-74-1,125-127 | 5 | 1500 | 100 | <1 | 50 | 10 | <1 | 200 | 2.4 | 95.0 | 5.0 | 3+ | 0.57 | 0.9 |
| 83-504B-75-2,37-39 | 6 | 800 | 50 | <1 | 10 | 1 | 1.5 | 93.0 | 7.0 | 3- | ||||
| 83-504B-76-1,56-58 | 7 | 600 | 75 | <1 | 30 | 5 | <1 | 6 | 2.2 | 95.0 | 5.0 | 2+ | 0.64 | 0.5 |
| 83-504B-77-1,74-76 | 8 | 1000 | 100 | <1 | 80 | 15 | <1 | 10 | 2.3 | 98.0 | 2.0 | 3 | ||
| 83-504B-78-2,71-73 | 9 | 1500 | 150 | <1 | 100 | 20 | <1 | 150 | 1.4 | 90.0 | 10.0 | 3+ | 0.66 | 0.6 |
| 83-504B-79-2,80-82 | 10 | 1000 | 100 | <1 | 60 | 10 | <1 | 400 | 2.1 | 97.0 | 3.0 | 4+ | ||
| 83-504B-80-1,126-128 | 11 | 600 | <1 | 50 | <0.1 | >0.0 | <100.0 | |||||||
| 83-504B-80-3,85-87 | 12 | 1500 | <1 | 2000 | 10.0 | >0.0 | <100.0 | |||||||
| 83-504B-82-1,51-53 | 13 | 160 | 40 | #80 | #4 | <1 | 2000 | 3.0 | <0.1 | >99.9 | 5 | 0.46 | 0.2 | |
| 83-504B-83-1,74-76 | 14 | 600 | 40 | #0 | <1 | 1000 | 5.0 | <0.1 | >99.9 | 5+ | ||||
| 83-504B-84-1,81-83 | 15 | 500 | #0 | <1 | 80 | <0.1 | <0.1 | >99.9 | 5+ | |||||
| 83-504B-85-1,117-119 | 16 | 650 | 10 | <1 | #30 | 3 | <1 | 1500 | 5.0 | <0.1 | <99.9 | 5+ | ||
| 83-504B-85-3,103-105 | 17 | 700 | 75 | <1 | 100 | 30 | <1 | 200 | 2.4 | >99.9 | <0.1 | 3+ | 0.44 | 0.6 |
| 83-504B-113-1,58-60 | 18 | 800 | 150 | <1 | 150 | 50 | <1 | 60 | 1.5 | 95.0 | 5.0 | 3- | 0.62 | 0.7 |
| 83-504B-117-1,77-79 | 19 | 600 | 80 | <1 | 400 | 60 | <1 | 20 | 0.8 | 97.0 | 2.0 | 5 | 0.67 | 0.6 |
| 83-504B-118-1,38-40 | 20 | 1200 | 250 | <1 | 250 | 60 | <1 | 40 | 1.7 | 97.0 | 2.0 | 4 | 0.66 | 0.7 |
| 83-504B-127-1,98-100 | 21 | 1000 | 200 | <1 | 150 | 40 | <1 | 150 | 1.6 | 99.0 | 1.0 | 4+ | 0.61 | 0.6 |
| 83-504B-129-1,66-68 | 22 | 1000 | 500 | <1 | 100 | 30 | <1 | 100 | 1.6 | 98.0 | 2.0 | 4- | 0.64 | 0.5 |
| 83-504B-130-1,109-111 | 23 | 1000 | 200 | <1 | 200 | 30 | <1 | 100 | 1.3 | 98.0 | 2.0 | 4 | 0.64 | 0.6 |
| 83-504B-131-1,39-41 | 24 | 1000 | 200 | <1 | 100 | 30 | <1 | 100 | 1.3 | 98.0 | 2.0 | 4 | 0.65 | 0.9 |
| 83-504B-132-1,73-75 | 25 | 1500 | 250 | <1 | 100 | 30 | <1 | 100 | 1.1 | 97.0 | 3.0 | 4+ | 0.54 | 0.6 |
| 83-504B-133-1,106-108 | 26 | 1000 | 150 | <1 | 150 | 50 | <1 | 60 | 1.9 | 99.0 | 1.0 | 4++ | 0.62 | 0.5 |
| 83-504B-137-1,109-111 | 27 | 1500 | 50 | <1 | 150 | 50 | <1 | 40 | 1.0 | 99.0 | 1.0 | 5- | 0.63 | 0.7 |