Dickens, Gerald Roy; Wallace, Paul J; Paull, Charles K; Borowski, Walter S (2000): Gas, water and volume characteristics during controlled degassing experiments on ODP Leg 164 PCS cores. PANGAEA, https://doi.org/10.1594/PANGAEA.803849, Supplement to: Dickens, GR et al. (2000): Detection of methane gas hydrate in the pressure core sampler (PCS): volume-pressure-time relations during controlled degassing experiments. In: Paull, CK; Matsumoto, R; Wallace, PJ; Dillon, WP (eds.) Proceedings of the Ocean Drilling Program, Scientific Results, College Station, TX (Ocean Drilling Program), 164, 1-14, https://doi.org/10.2973/odp.proc.sr.164.210.2000
Always quote above citation when using data! You can download the citation in several formats below.
A pressurized core with CH4 hydrate or dissolved CH4 should evolve gas volumes in a predictable manner as pressure is released over time at isothermal conditions. Incremental gas volumes were collected as pressure was released over time from 29 pressure core sampler (PCS) cores from Sites 994, 995, 996, and 997 on the Blake Ridge. Most of these cores were kept at or near 0ºC with an ice bath, and many of these cores yielded substantial quantities of CH4. Volume-pressure plots were constructed for 20 of these cores. Only five plots conform to expected volume and pressure changes for sediment cores with CH4 hydrate under initial pressure and temperature conditions. However, other evidence suggests that sediment in these five and at least five other PCS cores contained CH4 hydrate before core recovery and gas release. Detection of CH4 hydrate in a pressurized sediment core through volume-pressure relationships is complicated by two factors. First, significant quantities of CH4-poor borehole water fill the PCS and come into contact with the core. This leads to dilution of CH4 concentration in interstitial water and, in many cases, decomposition of CH4 hydrate before a degassing experiment begins. Second, degassing experiments were conducted after the PCS had equilibrated in an ice-water bath (0ºC). This temperature is significantly lower than in situ values in the sediment formation before core recovery. Our results and interpretations for PCS cores collected on Leg 164 imply that pressurized containers formerly used by the Deep Sea Drilling Project (DSDP) and currently used by ODP are not appropriately designed for direct detection of gas hydrate in sediment at in situ conditions through volume-pressure relationships.
Median Latitude: 32.137380 * Median Longitude: -75.831910 * South-bound Latitude: 31.785700 * West-bound Longitude: -76.191300 * North-bound Latitude: 32.493900 * East-bound Longitude: -75.468500
Date/Time Start: 1995-11-08T12:45:00 * Date/Time End: 1995-12-17T07:25:00
Datasets listed in this publication series
- Dickens, GR; Wallace, PJ; Paull, CK et al. (2000): (Table 1) Description of PCS cores of ODP Leg 164 sites. https://doi.org/10.1594/PANGAEA.803845
- Dickens, GR; Wallace, PJ; Paull, CK et al. (2000): (Table 2) Gas-release characteristics of PCS cores from ODP Leg 164 sites. https://doi.org/10.1594/PANGAEA.803846
- Dickens, GR; Wallace, PJ; Paull, CK et al. (2000): (Table 3) Water and gas characteristics of PCS cores from ODP Leg 164 sites. https://doi.org/10.1594/PANGAEA.803847
- Dickens, GR; Wallace, PJ; Paull, CK et al. (2000): (Table 4) Predicted volume-pressure characteristics of PCS cores from ODP Leg 164 sites. https://doi.org/10.1594/PANGAEA.803848