Leinen, Margaret W (1985): (Table 3) Quartz accumulation rates at DSDP Hole 86-576A [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.802654, In supplement to: Leinen, MW (1985): Quartz content of Northwest Pacific Hole 576A and implications for Cenozoic eolian transport. In: Heath GR; Burckle LH; et al. (eds.), Initial Reports of the Deep Sea Drilling Project, Washington (U.S. Govt. Printing Office), 86, 581-588, https://doi.org/10.2973/dsdp.proc.86.125.1985
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 32.356300 * Longitude: 164.275300
Date/Time Start: 1982-05-16T00:00:00 * Date/Time End: 1982-05-16T00:00:00
Minimum DEPTH, sediment/rock: 0.23 m * Maximum DEPTH, sediment/rock: 59.46 m
Event(s):
86-576A * Latitude: 32.356300 * Longitude: 164.275300 * Date/Time: 1982-05-16T00:00:00 * Elevation: -6217.0 m * Penetration: 65.7 m * Recovery: 66.2 m * Location: North Pacific * Campaign: Leg86 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 7 cores; 65.7 m cored; 0 m drilled; 100.8 % recovery
Comment:
Sediment depth is given in mbsf. Sub-bottom depths were calculated by G. R. Heath on the basis of correlation with Holes 576 and 576B. Samples 86-576A-6-6,17-20 to 86-576A-7-3,35-38 are carbonate turbidites.
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Sample code/label | Sample label | Leinen, Margaret W | DSDP/ODP/IODP sample designation | ||
| 2 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
| 3 | Quartz | Qz | % | Leinen, Margaret W | see reference(s) | |
| 4 | AGE | Age | ka BP | Geocode | ||
| 5 | Accumulation rate, quartz | Acc rat Qz | g/cm2/ka | Leinen, Margaret W | Calculated, see reference(s) |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
93 data points
Data
| 1 Sample label | 2 Depth sed [m] | 3 Qz [%] | 4 Age [ka BP] | 5 Acc rat Qz [g/cm2/ka] |
|---|---|---|---|---|
| 86-576A-1-1,21-25 | 0.23 | 16.63 | 260 | 0.2370 |
| 86-576A-1-3,81-85 | 3.83 | 18.11 | 530 | 0.2540 |
| 86-576A-1-6,80-83 | 8.31 | 15.52 | 870 | 0.1660 |
| 86-576A-2-3,47-50 | 12.19 | 17.35 | 1320 | 0.1290 |
| 86-576A-3-1,47-50 | 18.69 | 13.06 | 2560 | 0.0470 |
| 86-576A-3-3,70-73 | 21.91 | 8.87 | 3590 | 0.0330 |
| 86-576A-3-4,117-120 | 23.89 | 11.66 | 4390 | 0.0370 |
| 86-576A-3-5,127-130 | 25.49 | 9.02 | 5860 | 0.0083 |
| 86-576A-3-6,110-113 | 26.81 | 14.64 | 7600 | 0.0140 |
| 86-576A-4-1,50-53 | 28.21 | 10.92 | 9440 | 0.0100 |
| 86-576A-4-2,103-106 | 30.25 | 8.57 | 12130 | 0.0072 |
| 86-576A-4-3,98-101 | 31.69 | 5.81 | 14030 | 0.0048 |
| 86-576A-4-4,104-107 | 33.25 | 5.86 | 16350 | 0.0027 |
| 86-576A-4-5,20-23 | 33.91 | 4.25 | 17940 | 0.0020 |
| 86-576A-4-6,60-63 | 35.81 | 5.31 | 25000 | 0.0026 |
| 86-576A-5-1,87-90 | 38.09 | 5.16 | 28000 | 0.0025 |
| 86-576A-5-2,40-43 | 39.11 | 1.76 | 31000 | 0.0008 |
| 86-576A-5-3,30-33 | 40.51 | 2.64 | 34000 | 0.0013 |
| 86-576A-5-5,137-140 | 44.59 | 4.67 | 44000 | 0.0024 |
| 86-576A-5-6,130-133 | 46.01 | 2.88 | 47000 | 0.0014 |
| 86-576A-5-7,25-28 | 46.46 | 6.18 | 48000 | 0.0030 |
| 86-576A-6-1,90-93 | 47.61 | 3.96 | 51000 | 0.0019 |
| 86-576A-6-2,47-50 | 48.69 | 4.21 | 54000 | 0.0020 |
| 86-576A-6-3,93-96 | 50.65 | 4.81 | 58000 | 0.0024 |
| 86-576A-6-4,11-14 | 51.32 | 6.12 | 60000 | 0.0032 |
| 86-576A-6-5,12-15 | 52.83 | 5.41 | 64000 | 0.0028 |
| 86-576A-6-5,127-13 | 53.99 | 4.54 | 66000 | 0.0024 |
| 86-576A-6-6,17-20 | 54.39 | 5.29 | ||
| 86-576A-6-7,22-25 | 55.93 | 3.91 | ||
| 86-576A-7-1,137-140 | 57.59 | 4.16 | ||
| 86-576A-7-2,22-25 | 57.93 | 5.50 | ||
| 86-576A-7-3,17-20 | 59.39 | 6.46 | ||
| 86-576A-7-3,35-38 | 59.46 | 3.51 |