Morin, Roger H; von Herzen, Richard P (1986): (Table 2) Geothermal properties at DSDP Hole 90-587 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.793159, In supplement to: Morin, RH; von Herzen, RP (1986): Geothermal measurements at Deep Sea Drilling Project Site 587. In: Kennett, JP; von der Borch, CC; et al. (eds.), Initial Reports of the Deep Sea Drilling Project, Washington (U.S. Govt. Printing Office), 90, 1317-1324, https://doi.org/10.2973/dsdp.proc.90.137.1986
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -21.184700 * Longitude: 161.333200
Date/Time Start: 1982-12-03T00:00:00 * Date/Time End: 1982-12-03T00:00:00
Minimum DEPTH, sediment/rock: 0.0 m * Maximum DEPTH, sediment/rock: 108.7 m
Event(s):
90-587 * Latitude: -21.184700 * Longitude: 161.333200 * Date/Time: 1982-12-03T00:00:00 * Elevation: -1101.0 m * Penetration: 147 m * Recovery: 89 m * Location: South Pacific/Coral Sea/BANK * Campaign: Leg90 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 13 cores; 108.6 m cored; 38.4 m drilled; 82 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | Sample code/label | Sample label | Morin, Roger H | DSDP/ODP/IODP sample designation | ||
2 | DEPTH, sediment/rock | Depth sed | m | Geocode – mbsf | ||
3 | Temperature, in rock/sediment, maximum | t max | °C | Morin, Roger H | ||
4 | Temperature, in rock/sediment, minimum | t min | °C | Morin, Roger H | ||
5 | Temperature, in rock/sediment | t | °C | Morin, Roger H | Estimated | Uncertainties are subjective estimates based upon accuracy of theoretical fit |
6 | Temperature, standard deviation | T std dev | ± | Morin, Roger H | Estimated | Uncertainties are subjective estimates based upon accuracy of theoretical fit |
7 | Temperature (thermal) gradient | T grad | 10-3 °C/cm | Morin, Roger H | ||
8 | Temperature (thermal) gradient, standard deviation | T grad std dev | ± | Morin, Roger H | ||
9 | Conductivity, thermal | k | W/m/K | Morin, Roger H | Uncertainty includes standard experimental error of ± 4 and ± 4% possible systematic error (weighted harmonic mean) | |
10 | Conductivity, thermal, standard deviation | k std dev | ± | Morin, Roger H | Uncertainty includes standard experimental error of ± 4 and ± 4% possible systematic error (weighted harmonic mean) | |
11 | Heat flow | HF | mW/m2 | Morin, Roger H | #1. Uncertainty computed as RMS sum of errors in thermal gradient and conductivity | |
12 | Heat flow, standard deviation | HF std dev | ± | Morin, Roger H | #1. Uncertainty computed as RMS sum of errors in thermal gradient and conductivity | |
13 | Heat flow | HF | mW/m2 | Morin, Roger H | Average. Uncertainty computed as weighted RMS sum of interval heat flow errors | |
14 | Heat flow, standard deviation | HF std dev | ± | Morin, Roger H | Average. Uncertainty computed as weighted RMS sum of interval heat flow errors |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
38 data points
Data
1 Sample label (DSDP/ODP/IODP sample designation) | 2 Depth sed [m] (mbsf) | 3 t max [°C] | 4 t min [°C] | 5 t [°C] (Uncertainties are subjective ...) | 6 T std dev [±] (Uncertainties are subjective ...) | 7 T grad [10-3 °C/cm] | 8 T grad std dev [±] | 9 k [W/m/K] (Uncertainty includes standard...) | 10 k std dev [±] (Uncertainty includes standard...) | 11 HF [mW/m2] (#1. Uncertainty computed as R...) | 12 HF std dev [±] (#1. Uncertainty computed as R...) | 13 HF [mW/m2] (Average. Uncertainty computed...) | 14 HF std dev [±] (Average. Uncertainty computed...) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Seafloor | 0.0 | 4.10 | 0.10 | ||||||||||
90-587-4 | 31.9 | 6.57 | 6.42 | 6.45 | 0.01 | 0.74 | 0.03 | 1.06 | 0.08 | 78.4 | 7.1 | ||
90-587-8 | 70.3 | 8.64 | 8.00 | 8.13 | 0.02 | 0.44 | 0.01 | 1.39 | 0.11 | 61.2 | 5.1 | 56.9 | 5.2 |
90-587-12 | 108.7 | 10.74 | 8.65 | 9.08 | 0.04 | 0.25 | 0.01 | 1.39 | 0.11 | 34.8 | 3.1 |