Nishitani, Tadashi (1986): (Table 3) The ratio Fe/(Ti + Ti), x, Curie temperature, and oxidation parameter z, at DSDP Hole 92-597C [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.790816, In supplement to: Nishitani, T (1986): Electron microprobe and thermomagnetic analysis of basalt samples from Hole 597C. In: Leinen, M; Rea DK; et al. (eds.), Initial Reports of the Deep Sea Drilling Project, Washington (U.S. Govt. Printing Office), 92, 481-489, https://doi.org/10.2973/dsdp.proc.92.129.1986
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -18.807200 * Longitude: -129.770300
Date/Time Start: 1983-03-02T00:00:00 * Date/Time End: 1983-03-02T00:00:00
Minimum DEPTH, sediment/rock: 56.83 m * Maximum DEPTH, sediment/rock: 132.63 m
Event(s):
92-597C * Latitude: -18.807200 * Longitude: -129.770300 * Date/Time: 1983-03-02T00:00:00 * Elevation: -4164.0 m * Penetration: 143.5 m * Recovery: 55.2 m * Location: South Pacific Ocean * Campaign: Leg92 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 11 cores; 97 m cored; 3 m drilled; 56.9 % recovery
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Sample code/label | Sample label | Nishitani, Tadashi | DSDP/ODP/IODP sample designation | ||
| 2 | DEPTH, sediment/rock | Depth sed | m | Geocode – mbsf | ||
| 3 | Ratio | Ratio | Nishitani, Tadashi | Fe/(Fe + Ti) | ||
| 4 | Standard deviation | Std dev | ± | Nishitani, Tadashi | Fe/(Fe + Ti) | |
| 5 | x | x | Nishitani, Tadashi | see reference(s) | ||
| 6 | Standard deviation | Std dev | ± | Nishitani, Tadashi | see reference(s) | x |
| 7 | Curie temperature | Curie temp | °C | Nishitani, Tadashi | see reference(s) | T1 - observed during heating |
| 8 | Curie temperature | Curie temp | °C | Nishitani, Tadashi | see reference(s) | T2 - the highest, observed during heating |
| 9 | Curie temperature | Curie temp | °C | Nishitani, Tadashi | see reference(s) | T3 - observed during cooling |
| 10 | Oxidation parameter | z | Nishitani, Tadashi | see reference(s) | z1 - oxidation parameters determined using the Tc-z diagram of Nishitani and Kono (1983) | |
| 11 | Oxidation parameter | z | Nishitani, Tadashi | see reference(s) | z2 - oxidation parameters determined by electron microprobe analysis | |
| 12 | Standard deviation | Std dev | ± | Nishitani, Tadashi | see reference(s) | z2 |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
184 data points