Baines, A Graham; Cheadle, Michael J; John, Barbara E; Grimes, Craig B; Schwartz, Joshua J; Wooden, Joseph L (2009): (Table S1) Pb/U zircon ages of ODP Hole 118-735B [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.789169, In supplement to: Baines, AG et al. (2009): SHRIMP Pb/U zircon ages constrain gabbroic crustal accretion at Atlantis Bank on the ultraslow-spreading Southwest Indian Ridge. Earth and Planetary Science Letters, 287(3-4), 540-550, https://doi.org/10.1016/j.epsl.2009.09.002
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Ocean Drilling Program (ODP)
Coverage:
Median Latitude: -32.753717 * Median Longitude: 57.291100 * South-bound Latitude: -32.818240 * West-bound Longitude: 57.266200 * North-bound Latitude: -32.718910 * East-bound Longitude: 57.329570
Date/Time Start: 1987-12-06T04:45:00 * Date/Time End: 1998-05-10T15:50:00
Minimum DEPTH, sediment/rock: 0 m * Maximum DEPTH, sediment/rock: 1430 m
Event(s):
118-735B * Latitude: -32.724000 * Longitude: 57.266200 * Date/Time Start: 1987-12-06T04:45:00 * Date/Time End: 1987-12-11T01:00:00 * Elevation: -731.0 m * Penetration: 500.7 m * Recovery: 434.81 m * Location: South Indian Ridge, South Indian Ocean * Campaign: Leg118 * Basis: Joides Resolution * Method/Device: Drilling/drill rig (DRILL) * Comment: 88 cores; 500.7 m cored; 0 m drilled; 86.8 % recovery
179-1105A * Latitude: -32.718910 * Longitude: 57.277530 * Date/Time Start: 1998-05-02T06:50:00 * Date/Time End: 1998-05-10T15:50:00 * Elevation: 0.0 m * Penetration: 158 m * Recovery: 118.43 m * Location: Indian Ocean * Campaign: Leg179 * Basis: Joides Resolution * Method/Device: Drilling/drill rig (DRILL) * Comment: 30 cores; 143 m cored; 15 m drilled; 82.8 % recovery
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Event label | Event | ||||
| 2 | Sample code/label | Sample label | Baines, A Graham | DSDP/ODP/IODP sample designation | ||
| 3 | DEPTH, sediment/rock | Depth sed | m | Geocode – mbsf | ||
| 4 | Lithology/composition/facies | Lithology | Baines, A Graham | |||
| 5 | Sample comment | Sample comment | Baines, A Graham | grain/spot | ||
| 6 | Siphonodosaria hispidula | S. hispidula | # | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | |
| 7 | Uranium | U | mg/kg | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | |
| 8 | Thorium | Th | mg/kg | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | radiogenic |
| 9 | Lead-206 | 206Pb | mg/kg | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | |
| 10 | Lead-206 | 206Pb | % | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | of total 206Pb that is common 206Pb |
| 11 | Thorium-232/Uranium-238 ratio | 232Th/238U | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | atomic | |
| 12 | Uranium-238/Lead-206 ratio | 238U/206Pb | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | atomic | |
| 13 | Uranium-238/Lead-206, standard error | 238U/206Pb std e | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | atomic, absolute |
| 14 | Lead-207/Lead-206 ratio | 207Pb/206Pb | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | atomic | |
| 15 | Lead-207/Lead-206, standard error | 207Pb/206Pb std e | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | atomic, absolute |
| 16 | Lead-206/Uranium-238 ratio | 206Pb/238U | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | atomic | |
| 17 | Lead-206/Uranium-238, error | 206Pb/238U e | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | atomic, absolute |
| 18 | Age, dated | Age dated | ka | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 206Pb/238U, uncorrected ratios |
| 19 | Age, dated standard deviation | Age dated std dev | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 206Pb/238U, uncorrected ratios, 1 sigma |
| 20 | Age, dated | Age dated | ka | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 206Pb/238U, weighted average |
| 21 | Age, dated standard deviation | Age dated std dev | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 206Pb/238U, weighted average, 2 sigma |
| 22 | Age, dated standard deviation | Age dated std dev | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 206Pb/238U, weighted average, mean squared weighted deviation |
| 23 | Uranium-238/Lead-206 ratio | 238U/206Pb | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected atomic ratios | |
| 24 | Uranium-238/Lead-206, standard error | 238U/206Pb std e | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected atomic ratios, 1 sigma |
| 25 | Lead-207/Lead-206 ratio | 207Pb/206Pb | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected atomic ratios | |
| 26 | Lead-207/Lead-206, standard error | 207Pb/206Pb std e | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected atomic ratios, 1 sigma |
| 27 | Lead-206/Uranium-238 ratio | 206Pb/238U | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected atomic ratios | |
| 28 | Lead-206/Uranium-238, error | 206Pb/238U e | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected atomic ratios, 1 sigma |
| 29 | Age, dated | Age dated | ka | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected 206Pb/238U |
| 30 | Age, dated standard deviation | Age dated std dev | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected 206Pb/238U, 1 sigma |
| 31 | Age, dated | Age dated | ka | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected 206Pb/238U, weighted average |
| 32 | Age, dated standard deviation | Age dated std dev | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected 206Pb/238U, weighted average, 2 sigma |
| 33 | Age, dated standard deviation | Age dated std dev | ± | Baines, A Graham | Sensitive high-resolution ion microprobe (SHRIMP) | 230 Th corrected 206Pb/238U, weighted average, mean squared weighted deviation |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
3207 data points
Data
| 1 Event | 2 Sample label (DSDP/ODP/IODP sample designation) | 3 Depth sed [m] (mbsf) | 4 Lithology | 5 Sample comment (grain/spot) | 6 S. hispidula [#] (Sensitive high-resolution ion...) | 7 U [mg/kg] (Sensitive high-resolution ion...) | 8 Th [mg/kg] (radiogenic, Sensitive high-re...) | 9 206Pb [mg/kg] (Sensitive high-resolution ion...) | 10 206Pb [%] (of total 206Pb that is common...) | 11 232Th/238U (atomic, Sensitive high-resolu...) | 12 238U/206Pb (atomic, Sensitive high-resolu...) | 13 238U/206Pb std e [±] (atomic, absolute, Sensitive h...) | 14 207Pb/206Pb (atomic, Sensitive high-resolu...) | 15 207Pb/206Pb std e [±] (atomic, absolute, Sensitive h...) | 16 206Pb/238U (atomic, Sensitive high-resolu...) | 17 206Pb/238U e [±] (atomic, absolute, Sensitive h...) | 18 Age dated [ka] (206Pb/238U, uncorrected ratio...) | 19 Age dated std dev [±] (206Pb/238U, uncorrected ratio...) | 20 Age dated [ka] (206Pb/238U, weighted average,...) | 21 Age dated std dev [±] (206Pb/238U, weighted average,...) | 22 Age dated std dev [±] (206Pb/238U, weighted average,...) | 23 238U/206Pb (230 Th corrected atomic ratio...) | 24 238U/206Pb std e [±] (230 Th corrected atomic ratio...) | 25 207Pb/206Pb (230 Th corrected atomic ratio...) | 26 207Pb/206Pb std e [±] (230 Th corrected atomic ratio...) | 27 206Pb/238U (230 Th corrected atomic ratio...) | 28 206Pb/238U e [±] (230 Th corrected atomic ratio...) | 29 Age dated [ka] (230 Th corrected 206Pb/238U, ...) | 30 Age dated std dev [±] (230 Th corrected 206Pb/238U, ...) | 31 Age dated [ka] (230 Th corrected 206Pb/238U, ...) | 32 Age dated std dev [±] (230 Th corrected 206Pb/238U, ...) | 33 Age dated std dev [±] (230 Th corrected 206Pb/238U, ...) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 1.1 | 6 | 3 | 0.01 | 0.31 | 0.49 | 490.3 | 51.5 | 0.0488 | 0.0193 | 0.00203 | 0.00022 | 13100 | 1400 | 11570 | 360 | 1700 | 487.1 | 51.7 | 0.0484 | 0.0191 | 0.00205 | 0.00022 | 13200 | 1400 | 11640 | 370 | 1600 | |
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 2.1 | 6 | 3 | 0.01 | 5.78 | 0.47 | 833.1 | 110.2 | 0.0919 | 0.0395 | 0.00113 | 0.00016 | 7300 | 1000 | 823.8 | 110.1 | 0.0909 | 0.0390 | 0.00115 | 0.00016 | 7400 | 1100 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 3.1 | 5 | 2 | 0.01 | 25.53 | 0.47 | 552.8 | 68.9 | 0.2479 | 0.0816 | 0.00135 | 0.00025 | 8700 | 1600 | 548.7 | 69.1 | 0.2465 | 0.0812 | 0.00136 | 0.00025 | 8800 | 1600 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 4.1 | 6 | 2 | 0.01 | 5.32 | 0.45 | 522.5 | 56.9 | 0.0883 | 0.0329 | 0.00181 | 0.00021 | 11700 | 1400 | 518.8 | 57.1 | 0.0877 | 0.0327 | 0.00183 | 0.00022 | 11800 | 1400 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 5.1 | 5 | 2 | 0.01 | 3.70 | 0.51 | 702.4 | 93.8 | 0.0755 | 0.0294 | 0.00137 | 0.00019 | 8800 | 1200 | 695.8 | 93.8 | 0.0748 | 0.0292 | 0.00139 | 0.00019 | 8900 | 1300 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 6.1 | 5 | 2 | 0.01 | 4.67 | 0.50 | 423.4 | 47.1 | 0.0832 | 0.0297 | 0.00225 | 0.00027 | 14500 | 1700 | 421.0 | 47.3 | 0.0828 | 0.0295 | 0.00227 | 0.00027 | 14600 | 1700 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 7.1 | 5 | 3 | 0.01 | 1.75 | 0.52 | 534.0 | 61.8 | 0.0601 | 0.0238 | 0.00184 | 0.00022 | 11800 | 1400 | 530.2 | 62.0 | 0.0597 | 0.0236 | 0.00185 | 0.00022 | 11900 | 1400 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 8.1 | 9 | 3 | 0.10 | 90.59 | 0.35 | 105.5 | 5.4 | 0.7618 | 0.0521 | 0.00089 | 0.00065 | 5700 | 4200 | 105.4 | 5.5 | 0.7617 | 0.0521 | 0.00089 | 0.00065 | 5800 | 4200 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 9.1 | 5 | 3 | 0.01 | 3.77 | 0.55 | 543.4 | 59.3 | 0.0760 | 0.0258 | 0.00177 | 0.00020 | 11400 | 1300 | 539.5 | 59.4 | 0.0755 | 0.0256 | 0.00178 | 0.00021 | 11500 | 1300 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 10.1 | 9 | 6 | 0.01 | 6.02 | 0.75 | 569.0 | 51.1 | 0.0938 | 0.0265 | 0.00165 | 0.00016 | 10600 | 1000 | 565.3 | 51.2 | 0.0932 | 0.0263 | 0.00166 | 0.00016 | 10700 | 1000 | |||||||
| 118-735B | 118-735B-7D-1,10-18 | 26 | Deformed zircon bearing diorite vein cutting foliated clinopyroxene amphibole gabbro | 11.1 | 307 | 343 | 0.50 | 0.08 | 1.15 | 552.5 | 9.0 | 0.0469 | 0.0035 | 0.00181 | 0.00003 | 11600 | 200 | 549.9 | 9.0 | 0.0467 | 0.0035 | 0.00182 | 0.00003 | 11700 | 200 | |||||||
| 118-735B | 118-735B-14R-2,93-96 | 53 | Felsic vein | 1.1 | 42 | 10 | 0.10 | 16.16 | 0.25 | 435.1 | 18.7 | 0.1740 | 0.0188 | 0.00193 | 0.00010 | 12400 | 600 | 11700 | 640 | 5300 | 432.2 | 18.7 | 0.1730 | 0.0187 | 0.00194 | 0.00010 | 12500 | 600 | 11800 | 640 | 5200 | |
| 118-735B | 118-735B-14R-2,93-96 | 53 | Felsic vein | 2.1 | 70 | 22 | 0.10 | 7.88 | 0.32 | 550.8 | 20.1 | 0.1085 | 0.0126 | 0.00167 | 0.00007 | 10800 | 400 | 546.4 | 20.1 | 0.1077 | 0.0125 | 0.00169 | 0.00007 | 10900 | 400 | |||||||
| 118-735B | 118-735B-14R-2,93-96 | 53 | Felsic vein | 3.1 | 555 | 76 | 0.80 | 1.77 | 0.14 | 561.4 | 7.7 | 0.0602 | 0.0034 | 0.00175 | 0.00003 | 11300 | 200 | 556.5 | 7.8 | 0.0597 | 0.0034 | 0.00177 | 0.00003 | 11400 | 200 | |||||||
| 118-735B | 118-735B-14R-2,93-96 | 53 | Felsic vein | 4.1 | 470 | 76 | 0.80 | 1.51 | 0.17 | 513.2 | 7.1 | 0.0582 | 0.0034 | 0.00192 | 0.00003 | 12400 | 200 | 509.1 | 7.1 | 0.0578 | 0.0034 | 0.00194 | 0.00003 | 12500 | 200 | |||||||
| 118-735B | 118-735B-14R-2,93-96 | 53 | Felsic vein | 5.1 | 92 | 16 | 0.10 | 3.02 | 0.17 | 545.1 | 17.8 | 0.0701 | 0.0092 | 0.00178 | 0.00006 | 11500 | 400 | 540.5 | 17.8 | 0.0696 | 0.0091 | 0.00180 | 0.00006 | 11600 | 400 | |||||||
| 118-735B | 118-735B-14R-2,93-96 | 53 | Felsic vein | 6.1 | 42 | 9 | 0.10 | 13.26 | 0.23 | 476.5 | 20.6 | 0.1510 | 0.0188 | 0.00182 | 0.00009 | 11700 | 600 | 473.1 | 20.6 | 0.1501 | 0.0187 | 0.00184 | 0.00009 | 11800 | 600 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 1.1 | 135 | 51 | 0.20 | 2.52 | 0.39 | 535.2 | 13.7 | 0.0662 | 0.0067 | 0.00182 | 0.00005 | 11700 | 300 | 12040 | 200 | 900 | 531.2 | 13.8 | 0.0657 | 0.0067 | 0.00184 | 0.00005 | 11800 | 300 | 12130 | 210 | 800 | |
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 2.1 | 116 | 40 | 0.20 | 1.16 | 0.35 | 511.0 | 14.2 | 0.0554 | 0.0077 | 0.00193 | 0.00006 | 12500 | 400 | 507.2 | 14.2 | 0.0550 | 0.0076 | 0.00195 | 0.00006 | 12600 | 400 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 3.1 | 149 | 65 | 0.20 | 2.05 | 0.45 | 531.2 | 12.6 | 0.0625 | 0.0060 | 0.00184 | 0.00005 | 11900 | 300 | 527.3 | 12.6 | 0.0620 | 0.0060 | 0.00186 | 0.00005 | 12000 | 300 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 4.1 | 159 | 63 | 0.30 | 0.00 | 0.41 | 502.1 | 14.7 | 0.0407 | 0.0070 | 0.00201 | 0.00006 | 12900 | 400 | 498.6 | 14.7 | 0.0404 | 0.0069 | 0.00202 | 0.00006 | 13000 | 400 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 5.1 | 211 | 76 | 0.30 | 0.91 | 0.37 | 543.3 | 11.3 | 0.0535 | 0.0053 | 0.00182 | 0.00004 | 11700 | 300 | 539.1 | 11.3 | 0.0531 | 0.0053 | 0.00184 | 0.00004 | 11800 | 300 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 6.1 | 109 | 38 | 0.20 | 1.48 | 0.36 | 529.5 | 14.5 | 0.0579 | 0.0066 | 0.00186 | 0.00005 | 12000 | 300 | 525.5 | 14.6 | 0.0575 | 0.0066 | 0.00187 | 0.00005 | 12100 | 300 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 7.1 | 165 | 67 | 0.30 | 3.31 | 0.42 | 516.6 | 11.6 | 0.0724 | 0.0062 | 0.00187 | 0.00004 | 12100 | 300 | 512.9 | 11.6 | 0.0719 | 0.0061 | 0.00189 | 0.00005 | 12100 | 300 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 8.1 | 56 | 18 | 0.10 | 2.30 | 0.34 | 503.6 | 18.5 | 0.0644 | 0.0094 | 0.00194 | 0.00008 | 12500 | 500 | 499.9 | 18.6 | 0.0640 | 0.0094 | 0.00195 | 0.00008 | 12600 | 500 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 9.1 | 236 | 111 | 0.40 | 0.55 | 0.49 | 516.8 | 10.0 | 0.0506 | 0.0049 | 0.00192 | 0.00004 | 12400 | 300 | 513.2 | 10.0 | 0.0503 | 0.0049 | 0.00194 | 0.00004 | 12500 | 300 | |||||||
| 118-735B | 118-735B-28R-1,56-60 | 127 | Gabbro (mylonitic) | 10.1 | 148 | 61 | 0.20 | 2.04 | 0.43 | 526.9 | 12.9 | 0.0624 | 0.0062 | 0.00186 | 0.00005 | 12000 | 300 | 523.1 | 12.9 | 0.0619 | 0.0061 | 0.00187 | 0.00005 | 12100 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 1.1 | 149 | 51 | 0.20 | 2.09 | 0.36 | 547.1 | 25.5 | 0.0628 | 0.0069 | 0.00179 | 0.00009 | 11500 | 500 | 11770 | 170 | 800 | 542.8 | 25.5 | 0.0623 | 0.0069 | 0.00180 | 0.00009 | 11600 | 600 | 11870 | 170 | 700 | |
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 1.2 | 218 | 76 | 0.40 | 8.24 | 0.36 | 508.7 | 10.9 | 0.1113 | 0.0076 | 0.00180 | 0.00004 | 11600 | 300 | 505.0 | 10.9 | 0.1106 | 0.0076 | 0.00182 | 0.00004 | 11700 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 2.1 | 224 | 85 | 0.40 | 2.32 | 0.39 | 511.4 | 22.8 | 0.0646 | 0.0053 | 0.00191 | 0.00009 | 12300 | 600 | 507.7 | 22.8 | 0.0641 | 0.0053 | 0.00193 | 0.00009 | 12400 | 600 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 2.2 | 203 | 72 | 0.30 | 5.91 | 0.37 | 499.5 | 10.9 | 0.0930 | 0.0069 | 0.00188 | 0.00004 | 12100 | 300 | 495.9 | 11.0 | 0.0924 | 0.0068 | 0.00190 | 0.00005 | 12200 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 3.1 | 331 | 59 | 0.50 | 0.00 | 0.18 | 534.9 | 25.8 | 0.0414 | 0.0064 | 0.00188 | 0.00009 | 12100 | 600 | 530.5 | 25.9 | 0.0411 | 0.0064 | 0.00190 | 0.00009 | 12200 | 600 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 4.1 | 132 | 45 | 0.20 | 3.95 | 0.35 | 527.2 | 14.3 | 0.0774 | 0.0078 | 0.00182 | 0.00005 | 11700 | 300 | 523.2 | 14.3 | 0.0769 | 0.0077 | 0.00184 | 0.00005 | 11800 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 5.1 | 176 | 80 | 0.30 | 1.83 | 0.47 | 536.5 | 12.4 | 0.0608 | 0.0101 | 0.00183 | 0.00005 | 11800 | 300 | 532.6 | 12.5 | 0.0603 | 0.0100 | 0.00184 | 0.00005 | 11900 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 6.1 | 148 | 53 | 0.20 | 5.67 | 0.37 | 529.0 | 13.5 | 0.0910 | 0.0079 | 0.00178 | 0.00005 | 11500 | 300 | 525.0 | 13.5 | 0.0904 | 0.0079 | 0.00180 | 0.00005 | 11600 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 7.1 | 154 | 69 | 0.30 | 6.19 | 0.47 | 511.2 | 12.8 | 0.0952 | 0.0082 | 0.00184 | 0.00005 | 11800 | 300 | 507.6 | 12.8 | 0.0945 | 0.0081 | 0.00185 | 0.00005 | 11900 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 8.1 | 218 | 79 | 0.40 | 4.17 | 0.37 | 507.2 | 13.1 | 0.0792 | 0.0072 | 0.00189 | 0.00005 | 12200 | 300 | 503.6 | 13.1 | 0.0787 | 0.0071 | 0.00190 | 0.00005 | 12300 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 9.1 | 177 | 61 | 0.30 | 3.28 | 0.35 | 529.4 | 12.5 | 0.0722 | 0.0064 | 0.00183 | 0.00005 | 11800 | 300 | 525.3 | 12.5 | 0.0716 | 0.0064 | 0.00184 | 0.00005 | 11900 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 10.1 | 215 | 102 | 0.40 | 6.03 | 0.49 | 500.1 | 10.6 | 0.0939 | 0.0065 | 0.00188 | 0.00004 | 12100 | 300 | 496.7 | 10.6 | 0.0933 | 0.0065 | 0.00189 | 0.00004 | 12200 | 300 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 11.1 | 136 | 39 | 0.20 | 2.22 | 0.30 | 538.3 | 15.4 | 0.0638 | 0.0076 | 0.00182 | 0.00006 | 11700 | 400 | 534.1 | 15.4 | 0.0633 | 0.0075 | 0.00183 | 0.00006 | 11800 | 400 | |||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | core | 12.1 | 116 | 49 | 0.20 | 1.84 | 0.44 | 564.2 | 16.3 | 0.0608 | 0.0071 | 0.00174 | 0.00005 | 11200 | 300 | 559.9 | 16.4 | 0.0603 | 0.0070 | 0.00175 | 0.00005 | 11300 | 300 | ||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | rim | 12.2 | 106 | 45 | 0.20 | 0.00 | 0.44 | 568.9 | 18.8 | 0.0455 | 0.0073 | 0.00176 | 0.00006 | 11300 | 400 | 564.4 | 18.9 | 0.0451 | 0.0073 | 0.00177 | 0.00006 | 11400 | 400 | ||||||
| 118-735B | 118-735B-57R-3,44-47 | 278 | Magmatic gabbro breccia | 13.1 | 110 | 47 | 0.20 | 0.12 | 0.44 | 553.1 | 17.1 | 0.0472 | 0.0094 | 0.00181 | 0.00006 | 11600 | 400 | 548.9 | 17.1 | 0.0469 | 0.0093 | 0.00182 | 0.00006 | 11700 | 400 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 1.1 | 185 | 68 | 0.30 | 2.76 | 0.38 | 547.1 | 14.2 | 0.0681 | 0.0068 | 0.00178 | 0.00005 | 11400 | 300 | 11930 | 110 | 1100 | 542.9 | 14.2 | 0.0676 | 0.0068 | 0.00179 | 0.00005 | 11500 | 300 | 12020 | 110 | 1000 | |
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 2.1 | 166 | 60 | 0.30 | 2.03 | 0.37 | 540.5 | 13.7 | 0.0623 | 0.0065 | 0.00181 | 0.00005 | 11700 | 300 | 536.4 | 13.8 | 0.0619 | 0.0065 | 0.00183 | 0.00005 | 11800 | 300 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 3.1 | 479 | 206 | 0.80 | 1.00 | 0.44 | 521.9 | 9.2 | 0.0542 | 0.0034 | 0.00190 | 0.00003 | 12200 | 200 | 518.2 | 9.3 | 0.0538 | 0.0034 | 0.00191 | 0.00004 | 12300 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 4.1 | 467 | 225 | 0.70 | 2.28 | 0.50 | 537.5 | 7.9 | 0.0643 | 0.0038 | 0.00182 | 0.00003 | 11700 | 200 | 533.7 | 7.9 | 0.0638 | 0.0037 | 0.00183 | 0.00003 | 11800 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 5.1 | 510 | 191 | 0.80 | 1.62 | 0.39 | 524.7 | 7.9 | 0.0591 | 0.0037 | 0.00187 | 0.00003 | 12100 | 200 | 520.8 | 8.0 | 0.0586 | 0.0037 | 0.00189 | 0.00003 | 12200 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 5.2 | 618 | 245 | 1.00 | 1.34 | 0.41 | 533.7 | 6.8 | 0.0569 | 0.0031 | 0.00185 | 0.00002 | 11900 | 200 | 529.8 | 6.8 | 0.0565 | 0.0030 | 0.00186 | 0.00003 | 12000 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 6.1 | 600 | 246 | 1.00 | 0.53 | 0.42 | 540.5 | 7.8 | 0.0505 | 0.0033 | 0.00184 | 0.00003 | 11900 | 200 | 536.4 | 7.8 | 0.0501 | 0.0032 | 0.00186 | 0.00003 | 11900 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 6.2 | 672 | 273 | 1.10 | 3.08 | 0.42 | 510.7 | 6.1 | 0.0706 | 0.0033 | 0.00190 | 0.00002 | 12200 | 200 | 507.1 | 6.2 | 0.0701 | 0.0033 | 0.00191 | 0.00002 | 12300 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 7.1 | 391 | 238 | 0.60 | 1.48 | 0.63 | 529.7 | 9.1 | 0.0580 | 0.0043 | 0.00186 | 0.00003 | 12000 | 200 | 526.2 | 9.1 | 0.0576 | 0.0042 | 0.00187 | 0.00003 | 12100 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 7.2 | 612 | 348 | 1.00 | 1.21 | 0.59 | 536.2 | 6.8 | 0.0558 | 0.0031 | 0.00184 | 0.00002 | 11900 | 200 | 532.6 | 6.8 | 0.0554 | 0.0030 | 0.00186 | 0.00002 | 12000 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 8.1 | 358 | 122 | 0.60 | 2.74 | 0.35 | 555.8 | 10.4 | 0.0679 | 0.0050 | 0.00175 | 0.00004 | 11300 | 200 | 551.4 | 10.5 | 0.0674 | 0.0049 | 0.00177 | 0.00004 | 11400 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 9.1 | 399 | 187 | 0.60 | 1.57 | 0.48 | 538.1 | 9.4 | 0.0586 | 0.0043 | 0.00183 | 0.00003 | 11800 | 200 | 534.2 | 9.4 | 0.0582 | 0.0043 | 0.00184 | 0.00003 | 11900 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 10.1 | 699 | 428 | 1.10 | 0.23 | 0.63 | 554.3 | 20.8 | 0.0481 | 0.0024 | 0.00180 | 0.00007 | 11600 | 400 | 550.5 | 20.9 | 0.0478 | 0.0024 | 0.00181 | 0.00007 | 11700 | 400 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 10.2 | 490 | 269 | 0.80 | 2.05 | 0.57 | 521.7 | 7.3 | 0.0625 | 0.0042 | 0.00188 | 0.00003 | 12100 | 200 | 518.2 | 7.4 | 0.0620 | 0.0041 | 0.00189 | 0.00003 | 12200 | 200 | |||||||
| 118-735B | 176-735B-90R-8,49-54 | 517 | Hornblende quartz diorite to granodiorite dike cutting troctolite | 11.1 | 260 | 99 | 0.40 | 0.00 | 0.40 | 562.6 | 22.3 | 0.0461 | 0.0038 | 0.00178 | 0.00007 | 11500 | 500 | 558.1 | 22.3 | 0.0458 | 0.0038 | 0.00179 | 0.00007 | 11500 | 500 | |||||||
| 118-735B | 176-735B-110R-4,8-13 | 638 | Clinopyroxene, biotite, hornblende diorite dike cutting olivine gabbro | 1.1 | 263 | 124 | 0.40 | 2.99 | 0.49 | 535.2 | 10.2 | 0.0699 | 0.0052 | 0.00181 | 0.00004 | 11700 | 200 | 11850 | 170 | 1100 | 531.4 | 10.2 | 0.0694 | 0.0052 | 0.00183 | 0.00004 | 11800 | 200 | 11940 | 170 | 1100 | |
| 118-735B | 176-735B-110R-4,8-13 | 638 | Clinopyroxene, biotite, hornblende diorite dike cutting olivine gabbro | 2.1 | 382 | 291 | 0.60 | 1.51 | 0.79 | 555.7 | 10.8 | 0.0582 | 0.0039 | 0.00177 | 0.00004 | 11400 | 200 | 552.2 | 10.9 | 0.0578 | 0.0039 | 0.00178 | 0.00004 | 11500 | 200 | |||||||
| 118-735B | 176-735B-110R-4,8-13 | 638 | Clinopyroxene, biotite, hornblende diorite dike cutting olivine gabbro | 3.1 | 322 | 211 | 0.50 | 1.85 | 0.68 | 545.3 | 9.3 | 0.0609 | 0.0043 | 0.00180 | 0.00003 | 11600 | 200 | 541.7 | 9.4 | 0.0605 | 0.0043 | 0.00181 | 0.00003 | 11700 | 200 | |||||||
| 118-735B | 176-735B-110R-4,8-13 | 638 | Clinopyroxene, biotite, hornblende diorite dike cutting olivine gabbro | 4.1 | 316 | 194 | 0.50 | 1.32 | 0.64 | 532.9 | 9.2 | 0.0567 | 0.0043 | 0.00185 | 0.00003 | 11900 | 200 | 529.4 | 9.2 | 0.0563 | 0.0042 | 0.00186 | 0.00003 | 12000 | 200 | |||||||
| 118-735B | 176-735B-110R-4,8-13 | 638 | Clinopyroxene, biotite, hornblende diorite dike cutting olivine gabbro | 5.1 | 401 | 209 | 0.70 | 1.55 | 0.54 | 512.3 | 7.8 | 0.0585 | 0.0037 | 0.00192 | 0.00003 | 12400 | 200 | 508.9 | 7.8 | 0.0582 | 0.0037 | 0.00194 | 0.00003 | 12500 | 200 | |||||||
| 118-735B | 176-735B-110R-4,8-13 | 638 | Clinopyroxene, biotite, hornblende diorite dike cutting olivine gabbro | 6.1 | 319 | 126 | 0.50 | 1.12 | 0.41 | 520.3 | 8.9 | 0.0551 | 0.0044 | 0.00190 | 0.00003 | 12200 | 200 | 516.5 | 8.9 | 0.0547 | 0.0044 | 0.00192 | 0.00003 | 12300 | 200 | |||||||
| 118-735B | 176-735B-110R-4,8-13 | 638 | Clinopyroxene, biotite, hornblende diorite dike cutting olivine gabbro | 7.1 | 401 | 262 | 0.60 | 2.13 | 0.68 | 536.3 | 8.4 | 0.0631 | 0.0055 | 0.00182 | 0.00003 | 11800 | 200 | 532.9 | 8.5 | 0.0627 | 0.0055 | 0.00184 | 0.00003 | 11800 | 200 | |||||||
| 118-735B | 176-735B-110R-4,8-13 | 638 | Clinopyroxene, biotite, hornblende diorite dike cutting olivine gabbro | 8.1 | 469 | 221 | 0.80 | 3.13 | 0.49 | 523.9 | 7.6 | 0.0710 | 0.0039 | 0.00185 | 0.00003 | 11900 | 200 | 520.2 | 7.6 | 0.0705 | 0.0039 | 0.00186 | 0.00003 | 12000 | 200 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 1.1 | 232 | 124 | 0.40 | 5.24 | 0.55 | 510.6 | 9.5 | 0.0877 | 0.0058 | 0.00186 | 0.00004 | 12000 | 200 | 11950 | 130 | 1600 | 507.2 | 9.6 | 0.0871 | 0.0057 | 0.00187 | 0.00004 | 12000 | 200 | 12040 | 130 | 1500 | |
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 2.1 | 188 | 78 | 0.30 | 3.10 | 0.43 | 533.3 | 21.5 | 0.0708 | 0.0059 | 0.00182 | 0.00007 | 11700 | 500 | 529.4 | 21.5 | 0.0703 | 0.0059 | 0.00183 | 0.00008 | 11800 | 500 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 2.2 | 218 | 120 | 0.40 | 4.84 | 0.57 | 523.3 | 10.2 | 0.0845 | 0.0058 | 0.00182 | 0.00004 | 11700 | 200 | 519.8 | 10.2 | 0.0840 | 0.0057 | 0.00183 | 0.00004 | 11800 | 200 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 3.1 | 69 | 30 | 0.10 | 1.91 | 0.45 | 546.2 | 26.0 | 0.0614 | 0.0079 | 0.00180 | 0.00009 | 11600 | 600 | 542.1 | 26.1 | 0.0609 | 0.0078 | 0.00181 | 0.00009 | 11700 | 600 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 3.2 | 201 | 44 | 0.30 | 7.19 | 0.23 | 527.0 | 10.1 | 0.1031 | 0.0064 | 0.00176 | 0.00004 | 11300 | 200 | 522.7 | 10.1 | 0.1023 | 0.0064 | 0.00178 | 0.00004 | 11400 | 200 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 4.1 | 175 | 77 | 0.30 | 2.21 | 0.46 | 514.6 | 20.4 | 0.0637 | 0.0046 | 0.00190 | 0.00008 | 12200 | 500 | 511.0 | 20.5 | 0.0633 | 0.0046 | 0.00191 | 0.00008 | 12300 | 500 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 4.2 | 214 | 109 | 0.40 | 8.04 | 0.53 | 483.2 | 10.6 | 0.1098 | 0.0076 | 0.00190 | 0.00005 | 12300 | 300 | 480.1 | 10.7 | 0.1092 | 0.0075 | 0.00192 | 0.00005 | 12300 | 300 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 5.1 | 206 | 108 | 0.30 | 6.06 | 0.54 | 518.4 | 12.0 | 0.0941 | 0.0074 | 0.00181 | 0.00005 | 11700 | 300 | 514.9 | 12.1 | 0.0935 | 0.0073 | 0.00183 | 0.00005 | 11800 | 300 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 6.1 | 387 | 248 | 0.60 | 2.66 | 0.66 | 531.0 | 9.4 | 0.0673 | 0.0046 | 0.00183 | 0.00003 | 11800 | 200 | 527.5 | 9.4 | 0.0668 | 0.0046 | 0.00185 | 0.00003 | 11900 | 200 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 7.1 | 381 | 93 | 0.60 | 3.54 | 0.25 | 524.6 | 9.4 | 0.0743 | 0.0050 | 0.00184 | 0.00004 | 11800 | 200 | 520.5 | 9.4 | 0.0737 | 0.0050 | 0.00185 | 0.00004 | 11900 | 200 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 8.1 | 527 | 279 | 0.90 | 1.94 | 0.55 | 515.5 | 8.0 | 0.0616 | 0.0039 | 0.00190 | 0.00003 | 12300 | 200 | 512.1 | 8.0 | 0.0612 | 0.0039 | 0.00192 | 0.00003 | 12300 | 200 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 9.1 | 386 | 155 | 0.60 | 3.15 | 0.41 | 511.4 | 9.3 | 0.0712 | 0.0049 | 0.00189 | 0.00004 | 12200 | 200 | 507.8 | 9.4 | 0.0707 | 0.0049 | 0.00191 | 0.00004 | 12300 | 200 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 10.1 | 914 | 410 | 1.50 | 2.10 | 0.46 | 533.7 | 6.5 | 0.0629 | 0.0032 | 0.00183 | 0.00002 | 11800 | 200 | 529.8 | 6.6 | 0.0624 | 0.0031 | 0.00185 | 0.00002 | 11900 | 200 | |||||||
| 118-735B | 176-735B-126R-5,85-98 | 762 | Hornblende quartz diorite, tonalite and granodiorite dike cutting olivine gabbro | 11.1 | 723 | 552 | 1.20 | 2.50 | 0.79 | 507.8 | 6.8 | 0.0660 | 0.0035 | 0.00192 | 0.00003 | 12400 | 200 | 504.9 | 6.8 | 0.0656 | 0.0035 | 0.00193 | 0.00003 | 12400 | 200 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | rim | 1.1 | 7572 | 2817 | 13.90 | 0.30 | 0.38 | 468.7 | 1.6 | 0.0486 | 0.0008 | 0.00213 | 0.00001 | 13700 | 50 | 11950 | 170 | 400 | 465.6 | 1.6 | 0.0483 | 0.0008 | 0.00214 | 0.00001 | 13800 | 50 | 12040 | 170 | 400 |
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 2.1 | 173 | 82 | 0.30 | 0.39 | 0.49 | 536.3 | 10.9 | 0.0494 | 0.0045 | 0.00186 | 0.00004 | 12000 | 300 | 532.5 | 10.9 | 0.0490 | 0.0045 | 0.00187 | 0.00004 | 12100 | 300 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 3.1 | 65 | 36 | 0.10 | 0.38 | 0.57 | 536.2 | 18.8 | 0.0492 | 0.0079 | 0.00186 | 0.00007 | 12000 | 400 | 532.5 | 18.9 | 0.0489 | 0.0079 | 0.00187 | 0.00007 | 12100 | 400 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | Young component | 4.1 | 122 | 74 | 0.20 | -0.10 | 0.63 | 594.6 | 15.2 | 0.0455 | 0.0064 | 0.00168 | 0.00005 | 10800 | 300 | 590.2 | 15.2 | 0.0451 | 0.0064 | 0.00170 | 0.00005 | 10900 | 300 | ||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | rim | 5.1 | 381 | 212 | 0.60 | 0.66 | 0.58 | 552.3 | 14.1 | 0.0515 | 0.0038 | 0.00180 | 0.00005 | 11600 | 300 | 10840 | 280 | 100 | 548.4 | 14.1 | 0.0511 | 0.0038 | 0.00181 | 0.00005 | 11700 | 300 | 10920 | 280 | 200 |
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 6.1 | 63 | 34 | 0.10 | 0.79 | 0.57 | 529.3 | 16.5 | 0.0525 | 0.0072 | 0.00187 | 0.00006 | 12100 | 400 | 525.7 | 16.6 | 0.0521 | 0.0072 | 0.00189 | 0.00006 | 12200 | 400 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 7.1 | 206 | 142 | 0.30 | 0.17 | 0.71 | 536.2 | 9.9 | 0.0476 | 0.0041 | 0.00186 | 0.00004 | 12000 | 200 | 532.8 | 10.0 | 0.0473 | 0.0040 | 0.00187 | 0.00004 | 12100 | 200 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 8.1 | 287 | 203 | 0.50 | 0.04 | 0.73 | 541.5 | 8.5 | 0.0466 | 0.0035 | 0.00185 | 0.00003 | 11900 | 200 | 538.1 | 8.5 | 0.0463 | 0.0034 | 0.00186 | 0.00003 | 12000 | 200 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 9.1 | 182 | 122 | 0.30 | 0.63 | 0.69 | 540.5 | 10.3 | 0.0512 | 0.0043 | 0.00184 | 0.00004 | 11800 | 200 | 537.0 | 10.3 | 0.0509 | 0.0043 | 0.00185 | 0.00004 | 11900 | 200 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 10.1 | 565 | 449 | 0.90 | 0.53 | 0.82 | 542.7 | 12.8 | 0.0505 | 0.0032 | 0.00183 | 0.00004 | 11800 | 300 | 539.5 | 12.8 | 0.0502 | 0.0031 | 0.00184 | 0.00004 | 11900 | 300 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 11.1 | 960 | 1202 | 1.60 | 0.87 | 1.29 | 516.1 | 11.2 | 0.0532 | 0.0023 | 0.00192 | 0.00004 | 12400 | 300 | 514.0 | 11.3 | 0.0530 | 0.0023 | 0.00193 | 0.00004 | 12400 | 300 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | rim | 12.1 | 2309 | 1549 | 3.90 | 0.00 | 0.69 | 506.5 | 10.3 | 0.0455 | 0.0014 | 0.00198 | 0.00004 | 12700 | 300 | 503.5 | 10.4 | 0.0452 | 0.0014 | 0.00199 | 0.00004 | 12800 | 300 | ||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 12.2 | 321 | 284 | 0.50 | 0.83 | 0.91 | 592.7 | 10.5 | 0.0528 | 0.0042 | 0.00167 | 0.00003 | 10800 | 200 | 589.0 | 10.5 | 0.0525 | 0.0042 | 0.00168 | 0.00003 | 10800 | 200 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | rim | 13.1 | 2019 | 1309 | 3.50 | 0.14 | 0.67 | 500.7 | 11.1 | 0.0474 | 0.0015 | 0.00199 | 0.00004 | 12800 | 300 | 497.7 | 11.1 | 0.0471 | 0.0015 | 0.00201 | 0.00005 | 12900 | 300 | ||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 13.2 | 135 | 74 | 0.20 | 0.06 | 0.56 | 546.9 | 12.1 | 0.0468 | 0.0048 | 0.00183 | 0.00004 | 11800 | 300 | 543.0 | 12.1 | 0.0464 | 0.0048 | 0.00184 | 0.00004 | 11900 | 300 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | rim | 14.1 | 1080 | 239 | 1.70 | 0.98 | 0.23 | 558.5 | 12.2 | 0.0540 | 0.0024 | 0.00177 | 0.00004 | 11400 | 300 | 553.7 | 12.2 | 0.0536 | 0.0023 | 0.00179 | 0.00004 | 11500 | 300 | ||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 15.1 | 418 | 380 | 0.70 | 0.40 | 0.94 | 529.2 | 12.7 | 0.0494 | 0.0031 | 0.00188 | 0.00005 | 12100 | 300 | 526.3 | 12.8 | 0.0492 | 0.0031 | 0.00189 | 0.00005 | 12200 | 300 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 16.1 | 150 | 72 | 0.20 | -0.30 | 0.50 | 589.8 | 13.8 | 0.0439 | 0.0048 | 0.00170 | 0.00004 | 11000 | 300 | 585.2 | 13.9 | 0.0435 | 0.0048 | 0.00171 | 0.00004 | 11000 | 300 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | 17.1 | 643 | 511 | 1.10 | 0.45 | 0.82 | 520.2 | 11.8 | 0.0499 | 0.0027 | 0.00191 | 0.00004 | 12300 | 300 | 517.2 | 11.8 | 0.0496 | 0.0026 | 0.00193 | 0.00004 | 12400 | 300 | |||||||
| 118-735B | 176-735B-137R-2,71-75 | 854 | Disseminated oxide, amphibole diorite dike cutting olivine gabbro | rim | 18.1 | 1112 | 830 | 1.90 | 0.36 | 0.77 | 499.2 | 10.6 | 0.0492 | 0.0020 | 0.00200 | 0.00004 | 12900 | 300 | 496.3 | 10.7 | 0.0489 | 0.0020 | 0.00201 | 0.00004 | 12900 | 300 | ||||||
| 118-735B | 176-735B-154R-3,52-55 | 1008 | Orthopyroxene-bearing, disseminated oxide gabbro infiltration into olivine gabbro | 1.1 | 114 | 101 | 0.20 | 3.46 | 0.92 | 516.0 | 17.1 | 0.0736 | 0.0094 | 0.00187 | 0.00007 | 12000 | 400 | 11540 | 280 | 1100 | 513.3 | 17.1 | 0.0733 | 0.0093 | 0.00188 | 0.00007 | 12100 | 400 | 11620 | 290 | 1100 | |
| 118-735B | 176-735B-154R-3,52-55 | 1008 | Orthopyroxene-bearing, disseminated oxide gabbro infiltration into olivine gabbro | 2.1 | 369 | 206 | 0.60 | 6.27 | 0.58 | 526.1 | 9.8 | 0.0958 | 0.0059 | 0.00178 | 0.00004 | 11500 | 200 | 522.6 | 9.8 | 0.0952 | 0.0059 | 0.00179 | 0.00004 | 11600 | 200 | |||||||
| 118-735B | 176-735B-154R-3,52-55 | 1008 | Orthopyroxene-bearing, disseminated oxide gabbro infiltration into olivine gabbro | 3.1 | 68 | 29 | 0.10 | 13.14 | 0.45 | 458.8 | 18.9 | 0.1501 | 0.0167 | 0.00189 | 0.00009 | 12200 | 600 | 456.0 | 18.9 | 0.1493 | 0.0166 | 0.00191 | 0.00009 | 12300 | 600 | |||||||
| 118-735B | 176-735B-154R-3,52-55 | 1008 | Orthopyroxene-bearing, disseminated oxide gabbro infiltration into olivine gabbro | 4.1 | 436 | 275 | 0.70 | 3.32 | 0.65 | 547.1 | 9.6 | 0.0725 | 0.0047 | 0.00177 | 0.00003 | 11400 | 200 | 543.4 | 9.6 | 0.0720 | 0.0047 | 0.00178 | 0.00003 | 11500 | 200 | |||||||
| 118-735B | 176-735B-202R-7,85-94 | 1430 | Disseminated oxide amphibole diorite dike, cutting olivine gabbro and troctolitic microgabbro | 1.1 | 655 | 226 | 1.10 | 1.92 | 0.36 | 532.5 | 6.8 | 0.0614 | 0.0033 | 0.00184 | 0.00002 | 11900 | 200 | 11760 | 200 | 1000 | 528.4 | 6.8 | 0.0610 | 0.0033 | 0.00186 | 0.00003 | 12000 | 200 | 11860 | 200 | 1000 | |
| 118-735B | 176-735B-202R-7,85-94 | 1430 | Disseminated oxide amphibole diorite dike, cutting olivine gabbro and troctolitic microgabbro | 2.1 | 144 | 54 | 0.20 | 4.21 | 0.39 | 513.8 | 13.0 | 0.0795 | 0.0068 | 0.00186 | 0.00005 | 12000 | 300 | 510.1 | 13.0 | 0.0790 | 0.0067 | 0.00188 | 0.00005 | 12100 | 300 | |||||||
| 118-735B | 176-735B-202R-7,85-94 | 1430 | Disseminated oxide amphibole diorite dike, cutting olivine gabbro and troctolitic microgabbro | 3.1 | 108 | 43 | 0.20 | 0.00 | 0.41 | 562.3 | 18.0 | 0.0457 | 0.0064 | 0.00178 | 0.00006 | 11500 | 400 | 557.9 | 18.0 | 0.0453 | 0.0064 | 0.00179 | 0.00006 | 11600 | 400 | |||||||
| 118-735B | 176-735B-202R-7,85-94 | 1430 | Disseminated oxide amphibole diorite dike, cutting olivine gabbro and troctolitic microgabbro | 4.1 | 633 | 174 | 1.00 | 0.82 | 0.28 | 541.5 | 7.8 | 0.0528 | 0.0030 | 0.00183 | 0.00003 | 11800 | 200 | 537.2 | 7.8 | 0.0524 | 0.0030 | 0.00185 | 0.00003 | 11900 | 200 | |||||||
| 118-735B | 176-735B-202R-7,85-94 | 1430 | Disseminated oxide amphibole diorite dike, cutting olivine gabbro and troctolitic microgabbro | 5.1 | 32 | 14 | 0.05 | 5.68 | 0.47 | 570.6 | 33.6 | 0.0911 | 0.0214 | 0.00165 | 0.00011 | 10600 | 700 | 566.2 | 33.7 | 0.0904 | 0.0213 | 0.00167 | 0.00011 | 10700 | 700 | |||||||
| 118-735B | 176-735B-202R-7,85-94 | 1430 | Disseminated oxide amphibole diorite dike, cutting olivine gabbro and troctolitic microgabbro | 6.1 | 184 | 96 | 0.30 | 3.77 | 0.54 | 537.6 | 12.0 | 0.0761 | 0.0064 | 0.00179 | 0.00004 | 11500 | 300 | 533.8 | 12.0 | 0.0756 | 0.0064 | 0.00180 | 0.00004 | 11600 | 300 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 1.1 | 23 | 10 | 0.04 | 2.93 | 0.44 | 503.4 | 27.4 | 0.0694 | 0.0151 | 0.00437 | 0.00025 | 12400 | 700 | 11820 | 230 | 900 | 500.0 | 27.5 | 0.0690 | 0.0150 | 0.00194 | 0.00011 | 12500 | 700 | 11910 | 230 | 900 | |
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 2.1 | 24 | 10 | 0.04 | -0.09 | 0.43 | 514.2 | 25.9 | 0.0456 | 0.0107 | 0.00441 | 0.00023 | 12500 | 700 | 510.5 | 26.0 | 0.0452 | 0.0106 | 0.00196 | 0.00010 | 12600 | 700 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 3.1 | 28 | 13 | 0.05 | 4.34 | 0.46 | 498.3 | 24.5 | 0.0806 | 0.0146 | 0.00435 | 0.00023 | 12400 | 700 | 494.9 | 24.6 | 0.0801 | 0.0145 | 0.00193 | 0.00010 | 12500 | 700 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 4.1 | 14 | 6 | 0.02 | 3.40 | 0.45 | 555.6 | 40.9 | 0.0731 | 0.0212 | 0.00394 | 0.00031 | 11200 | 900 | 551.4 | 40.9 | 0.0726 | 0.0210 | 0.00175 | 0.00014 | 11300 | 900 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 5.1 | 22 | 10 | 0.04 | -1.05 | 0.44 | 537.1 | 31.3 | 0.0380 | 0.0113 | 0.00426 | 0.00026 | 12100 | 700 | 533.1 | 31.3 | 0.0377 | 0.0112 | 0.00190 | 0.00011 | 12200 | 700 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 6.1 | 19 | 9 | 0.03 | 1.58 | 0.48 | 577.1 | 38.3 | 0.0587 | 0.0170 | 0.00387 | 0.00027 | 11000 | 800 | 572.6 | 38.4 | 0.0583 | 0.0168 | 0.00172 | 0.00012 | 11100 | 800 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 7.1 | 18 | 8 | 0.03 | 0.62 | 0.44 | 602.0 | 38.9 | 0.0512 | 0.0137 | 0.00374 | 0.00025 | 10600 | 700 | 597.0 | 39.0 | 0.0508 | 0.0136 | 0.00167 | 0.00011 | 10700 | 700 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 8.1 | 20 | 9 | 0.03 | -0.76 | 0.46 | 541.4 | 29.8 | 0.0403 | 0.0110 | 0.00422 | 0.00024 | 12000 | 700 | 537.5 | 29.9 | 0.0400 | 0.0110 | 0.00188 | 0.00011 | 12100 | 700 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 9.1 | 43 | 18 | 0.10 | 2.46 | 0.44 | 563.8 | 23.8 | 0.0657 | 0.0109 | 0.00392 | 0.00017 | 11100 | 500 | 559.4 | 23.9 | 0.0652 | 0.0108 | 0.00174 | 0.00008 | 11200 | 500 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 10.1 | 51 | 22 | 0.10 | -0.21 | 0.44 | 556.2 | 21.7 | 0.0446 | 0.0081 | 0.00408 | 0.00016 | 11600 | 500 | 552.0 | 21.7 | 0.0443 | 0.0080 | 0.00182 | 0.00007 | 11700 | 500 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 11.1 | 322 | 113 | 0.50 | 1.62 | 0.36 | 528.5 | 8.3 | 0.0591 | 0.0039 | 0.00422 | 0.00007 | 12000 | 200 | 524.6 | 8.3 | 0.0587 | 0.0038 | 0.00188 | 0.00003 | 12100 | 200 | |||||||
| 179-1105A | 179-1105A-8R-4,21-25 | 57 | Diffuse oxide diorite dike intruding an oxide and olivine-bearing gabbro | 12.1 | 323 | 132 | 0.50 | 1.25 | 0.42 | 539.9 | 8.3 | 0.0562 | 0.0037 | 0.00415 | 0.00007 | 11800 | 200 | 535.9 | 8.3 | 0.0558 | 0.0036 | 0.00184 | 0.00003 | 11900 | 200 | |||||||
| K653-17 | JAMSTEC sample6 K653-17 | 0 | Gabbro mylonite | 1.1 | 82 | 35 | 0.12 | -25.30 | 0.44 | 571.5 | 16.2 | 0.0432 | 0.0097 | 0.00175 | 0.00005 | 11300 | 300 | 11190 | 300 | 1000 | 567.0 | 16.3 | 0.0428 | 0.0096 | 0.00177 | 0.00006 | 11400 | 400 | 11270 | 310 | 900 | |
| K653-17 | JAMSTEC sample6 K653-17 | 0 | Gabbro mylonite | 2.1 | 57 | 32 | 0.09 | -26.41 | 0.57 | 535.6 | 17.3 | 0.0947 | 0.0138 | 0.00187 | 0.00006 | 11300 | 400 | 531.9 | 17.3 | 0.0938 | 0.0137 | 0.00177 | 0.00007 | 11400 | 400 | |||||||
| K653-17 | JAMSTEC sample6 K653-17 | 0 | Gabbro mylonite | 3.1 | 77 | 28 | 0.12 | -1.88 | 0.38 | 559.0 | 15.6 | 0.0546 | 0.0080 | 0.00179 | 0.00005 | 11400 | 300 | 554.5 | 15.7 | 0.0542 | 0.0080 | 0.00179 | 0.00005 | 11500 | 400 | |||||||
| K653-17 | JAMSTEC sample6 K653-17 | 0 | Gabbro mylonite | 4.1 | 36 | 20 | 0.06 | 37.82 | 0.58 | 526.2 | 21.4 | 0.0988 | 0.0162 | 0.00190 | 0.00008 | 11500 | 500 | 522.6 | 21.4 | 0.0984 | 0.0161 | 0.00179 | 0.00008 | 11500 | 500 | |||||||
| K653-17 | JAMSTEC sample6 K653-17 | 0 | Gabbro mylonite | 5.1 | 16 | 9 | 0.02 | 29.49 | 0.60 | 580.4 | 35.6 | 0.1587 | 0.0308 | 0.00172 | 0.00011 | 9600 | 700 | 576.1 | 35.7 | 0.1579 | 0.0306 | 0.00149 | 0.00011 | 9600 | 700 | |||||||
| K653-17 | JAMSTEC sample6 K653-17 | 0 | Gabbro mylonite | 6.1 | 20 | 14 | 0.04 | 55.73 | 0.74 | 497.5 | 26.3 | 0.1467 | 0.0248 | 0.00201 | 0.00011 | 11400 | 700 | 494.6 | 26.4 | 0.1463 | 0.0247 | 0.00177 | 0.00011 | 11400 | 700 | |||||||
| K653-17 | JAMSTEC sample6 K653-17 | 0 | Gabbro mylonite | 7.1 | 85 | 36 | 0.12 | -7.92 | 0.44 | 600.3 | 17.0 | 0.0641 | 0.0103 | 0.00167 | 0.00005 | 10500 | 300 | 595.3 | 17.0 | 0.0635 | 0.0102 | 0.00164 | 0.00005 | 10600 | 300 | |||||||
| K653-17 | JAMSTEC sample6 K653-17 | 0 | Gabbro mylonite | 8.1 | 56 | 43 | 0.09 | -6.73 | 0.79 | 561.0 | 18.4 | 0.0468 | 0.0115 | 0.00178 | 0.00006 | 11500 | 400 | 557.5 | 18.5 | 0.0465 | 0.0115 | 0.00179 | 0.00006 | 11600 | 400 |