Ishikawa, Naoto; Frost, Gina Marie (2001): (Table T1) Magnetic anisotropy of samples from ODP Hole 180-1117A [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.787082, Supplement to: Ishikawa, N; Frost, GM (2001): Data report: Magnetic anisotropy of samples in a fault zone at ODP Site 1117 in the western Woodlark Basin (Papua New Guinea). In: Huchon, P; Taylor, B; Klaus, A (eds.) Proceedings of the Ocean Drilling Program, Scientific Results, College Station, TX (Ocean Drilling Program), 180, 1-7, https://doi.org/10.2973/odp.proc.sr.180.174.2001
Always quote citation above when using data! You can download the citation in several formats below.
Abstract:
At Site 1117, drilled during Leg 180 of the Ocean Drilling Program in the Woodlark Basin, we cored a fault zone and recovered fault gouge, mylonitized and brecciated gabbros, and undeformed gabbro. We measured the anisotropy of magnetic susceptibility for the rock samples. The susceptibilities of the fault gouge samples were lower than those of the undeformed gabbro, and those of deformed gabbros were lowest. The anisotropy degrees of the fault gouge samples were higher than those of the deformed and undeformed gabbros. Oblate magnetic fabrics were dominant in the samples from the fault zone.
Project(s):
Ocean Drilling Program (ODP)
Coverage:
Latitude: -9.775430 * Longitude: 151.549080
Date/Time Start: 1998-07-26T11:00:00 * Date/Time End: 1998-07-28T04:00:00
Minimum Elevation: -1163.2 m * Maximum Elevation: -1163.2 m
Event(s):
180-1117A * Latitude: -9.775430 * Longitude: 151.549080 * Date/Time Start: 1998-07-26T11:00:00 * Date/Time End: 1998-07-28T04:00:00 * Elevation: -1163.2 m * Penetration: 111.1 m * Recovery: 6.42 m * Location: Solomon Sea * Campaign: Leg180 * Basis: Joides Resolution * Method/Device: Drilling/drill rig (DRILL) * Comment: 14 cores; 111.1 m cored; 0 m drilled; 5.8 % recovery
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Sample code/label | Sample label | Ishikawa, Naoto | DSDP/ODP/IODP sample designation | ||
| 2 | Piece | Piece | Ishikawa, Naoto | |||
| 3 | Sample comment | Sample comment | Ishikawa, Naoto | |||
| 4 | Volume | Vol | cm3 | Ishikawa, Naoto | ||
| 5 | Magnetic susceptibility, volume | kappa | 10-6 SI | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | |
| 6 | Principle axes K1 of normalized anisotropy tensor | K max | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | ||
| 7 | Principle axes K2 of normalized anisotropy tensor | K int | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | ||
| 8 | Principle axes K3 of normalized anisotropy tensor | K min | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | ||
| 9 | Magnitude of anisotropy | P` | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | ||
| 10 | Shape of susceptibility | T | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | ||
| 11 | Declination of principle axis K1 | D(Kmax) | deg | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | |
| 12 | Inclination of principle axis K1 | I(Kmax) | deg | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | |
| 13 | Declination of principle axis K2 | D(Kint) | deg | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | |
| 14 | Inclination of principle axis K2 | I(Kint) | deg | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | |
| 15 | Declination of principle axis K3 | D(Kmin) | deg | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 | |
| 16 | Inclination of principle axis K3 | I(Kmin) | deg | Ishikawa, Naoto | Susceptibility unit Kappabridge KLY-2 |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
263 data points
Data
| 1 Sample label | 2 Piece | 3 Sample comment | 4 Vol [cm3] | 5 kappa [10-6 SI] | 6 K max | 7 K int | 8 K min | 9 P` | 10 T | 11 D(Kmax) [deg] | 12 I(Kmax) [deg] | 13 D(Kint) [deg] | 14 I(Kint) [deg] | 15 D(Kmin) [deg] | 16 I(Kmin) [deg] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 180-1117A-1R-1,20-22 | measured on board | 8.00 | 7373.0 | 1.0529 | 1.0194 | 0.9277 | 1.141 | 0.489 | 275 | 11 | 6 | 7 | 130 | 77 | |
| 180-1117A-1R-1,29-31 | 8.00 | 10580.0 | 1.0567 | 1.0139 | 0.9294 | 1.140 | 0.356 | 270 | 20 | 13 | 33 | 154 | 50 | ||
| 180-1117A-1R-1,121-123 | 8.00 | 14090.0 | 1.0961 | 1.0322 | 0.8717 | 1.268 | 0.476 | 359 | 54 | 541 | 18 | 140 | 29 | ||
| 180-1117A-1R-1,128-130 | 8.00 | 7309.0 | 1.0485 | 1.0112 | 0.9403 | 1.117 | 0.335 | 290 | 69 | 148 | 17 | 54 | 12 | ||
| 180-1117A-1R-2,24-26 | 8.00 | 12040.0 | 1.1144 | 1.0674 | 0.8182 | 1.398 | 0.721 | 127 | 77 | 244 | 6 | 335 | 12 | ||
| 180-1117A-1R-2,71-73 | 8.00 | 9452.0 | 1.0394 | 1.0234 | 0.9372 | 1.118 | 0.700 | 127 | 14 | 329 | 74 | 218 | 6 | ||
| 180-1117A-1R-2,103-105 | 8.00 | 6484.0 | 1.0672 | 1.0402 | 0.8926 | 1.213 | 0.713 | 289 | 58 | 78 | 29 | 176 | 14 | ||
| 180-1117A-1R-2,125-127 | measured on board | 8.00 | 5770.0 | 1.0636 | 1.0290 | 0.9074 | 1.182 | 0.584 | 301 | 52 | 138 | 37 | 42 | 8 | |
| 180-1117A-1R-3,10-22 | measured on board | 8.00 | 5983.0 | 1.0676 | 1.0094 | 0.9230 | 1.158 | 0.230 | 290 | 65 | 108 | 25 | 198 | 1 | |
| 180-1117A-1R-3,45-47 | 8.00 | 2881.0 | 1.0430 | 1.0177 | 0.9393 | 1.116 | 0.531 | 266 | 61 | 71 | 28 | 165 | 6 | ||
| 180-1117A-1R-3,61-63 | 8.00 | 7449.0 | 1.0500 | 1.0066 | 0.9434 | 1.114 | 0.211 | 288 | 69 | 127 | 20 | 34 | 6 | ||
| 180-1117A-1R-3,76-78 | 8.00 | 4711.0 | 1.0413 | 1.0211 | 0.9376 | 1.118 | 0.627 | 63 | 66 | 297 | 14 | 202 | 18 | ||
| 180-1117A-2R-CC,7-9 | measured on board | 8.00 | 13780.0 | 1.0320 | 1.0246 | 0.9435 | 1.105 | 0.839 | 310 | 5 | 41 | 16 | 203 | 73 | |
| 180-1117A-7R-1 | 1 | 7.89 | 600.9 | 1.0335 | 1.0068 | 0.9597 | 1.078 | 0.293 | 266 | 61 | 275 | 0 | 85 | 29 | |
| 180-1117A-9R-1 | 8 | 8.42 | 674.4 | 1.0153 | 1.0010 | 0.9838 | 1.032 | 0.100 | 177 | 37 | 284 | 20 | 36 | 46 | |
| 180-1117A-9R-1 | 17 | measured on board | 10.77 | 546.0 | 1.0105 | 1.0036 | 0.9859 | 1.026 | 0.444 | 296 | 2 | 20 | 59 | 205 | 31 |
| 180-1117A-9R-2 | 19 | 8.95 | 489.5 | 1.0172 | 0.9976 | 0.9852 | 1.033 | -0.217 | 56 | 21 | 163 | 37 | 304 | 45 | |
| 180-1117A-11R-1 | 7 | measured on board | 6.78 | 63330.0 | 1.0282 | 1.0121 | 0.9597 | 1.075 | 0.542 | 109 | 13 | 16 | 11 | 246 | 73 |