Jarrard, Richard D; Kerneklian, Marcy J (2007): (Table T1) Density and porosity measurements of basalt core plugs from ODP Site 206-1256 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.775807, Supplement to: Jarrard, RD; Kerneklian, MJ (2007): Data report: Physical properties of the upper oceanic crust of ODP Site 1256: Multisensor track and moisture and density measurements. In: Teagle, DAH; Wilson, DS; Acton, GD; Vanko, DA (eds.) Proceedings of the Ocean Drilling Program, Scientific Results, College Station, TX (Ocean Drilling Program), 206, 1-11, https://doi.org/10.2973/odp.proc.sr.206.011.2007
Always quote citation above when using data! You can download the citation in several formats below.
Abstract:
Bulk density, porosity, and matrix density were measured on 88 basalt core plugs from Ocean Drilling Program Site 1256. Shipboard measurements using the multisensor track were reprocessed and edited to minimize the effects of core segmentation and calibration problems and are presented in this data report.
Project(s):
Ocean Drilling Program (ODP)
Coverage:
Median Latitude: 0.736180 * Median Longitude: -91.934330 * South-bound Latitude: 0.736050 * West-bound Longitude: -91.934350 * North-bound Latitude: 0.736310 * East-bound Longitude: -91.934310
Date/Time Start: 2002-11-17T06:30:00 * Date/Time End: 2002-11-23T03:45:00
Minimum DEPTH, sediment/rock: 245.49 m * Maximum DEPTH, sediment/rock: 747.69 m
Event(s):
206-1256C * Latitude: 0.736310 * Longitude: -91.934310 * Date/Time Start: 2002-11-17T06:30:00 * Date/Time End: 2002-11-23T03:45:00 * Elevation: -3634.7 m * Penetration: 340.3 m * Recovery: 61.07 m * Location: North Pacific Ocean * Campaign: Leg206 * Basis: Joides Resolution * Method/Device: Drilling/drill rig (DRILL) * Comment: 14 cores; 120.2 m cored; 220.1 m drilled; 50.8 % recovery
206-1256D * Latitude: 0.736050 * Longitude: -91.934350 * Date/Time: 2002-11-23T03:45:00 * Elevation: -3634.7 m * Penetration: 752 m * Recovery: 227.3 m * Location: North Pacific Ocean * Campaign: Leg206 * Basis: Joides Resolution * Method/Device: Drilling/drill rig (DRILL) * Comment: 73 cores; 475.9 m cored; 276.1 m drilled; 47.8 % recovery
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Event label | Event | ||||
| 2 | Sample code/label | Sample label | Jarrard, Richard D | DSDP/ODP/IODP sample designation | ||
| 3 | DEPTH, sediment/rock | Depth sed | m | Geocode – mbsf | ||
| 4 | Density, wet bulk | WBD | g/cm3 | Jarrard, Richard D | Calculated from weight/volume | |
| 5 | Porosity | Poros | % vol | Jarrard, Richard D | Calculated from weight/volume | |
| 6 | Density, grain | Density grain | g/cm3 | Jarrard, Richard D | Calculated from weight/volume |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
352 data points
Data
| 1 Event | 2 Sample label | 3 Depth sed [m] | 4 WBD [g/cm3] | 5 Poros [% vol] | 6 Density grain [g/cm3] |
|---|---|---|---|---|---|
| 206-1256C | 206-1256C-4R-1,49-51 | 245.49 | 2.93 | 3.8 | 3.01 |
| 206-1256C | 206-1256C-5R-2,121-133 | 255.10 | 2.90 | 4.6 | 2.99 |
| 206-1256C | 206-1256C-6R-4,74-76 | 261.81 | 2.75 | 8.2 | 2.90 |
| 206-1256C | 206-1256C-7R-5,17-19 | 271.08 | 2.92 | 3.6 | 2.99 |
| 206-1256C | 206-1256C-8R-6,107-109 | 282.53 | 2.93 | 3.3 | 2.99 |
| 206-1256C | 206-1256C-9R-7,77-79 | 293.85 | 2.95 | 3.7 | 3.02 |
| 206-1256C | 206-1256C-10R-2,10-12 | 295.45 | 2.95 | 3.5 | 3.02 |
| 206-1256C | 206-1256C-11R-5,105-107 | 310.27 | 2.92 | 4.2 | 3.00 |
| 206-1256C | 206-1256C-11R-7,5-7 | 312.09 | 2.92 | 4.5 | 3.01 |
| 206-1256C | 206-1256C-12R-2,36-38 | 314.60 | 2.90 | 4.3 | 2.98 |
| 206-1256D | 206-1256D-2R-1,14-16 | 276.24 | 2.90 | 4.8 | 3.00 |
| 206-1256D | 206-1256D-3R-3,92-74 | 281.44 | 2.94 | 4.5 | 3.03 |
| 206-1256D | 206-1256D-4R-3,47-49 | 288.17 | 2.94 | 4.6 | 3.04 |
| 206-1256D | 206-1256D-5R-4,49-51 | 294.29 | 2.93 | 3.8 | 3.01 |
| 206-1256D | 206-1256D-6R-3,81-83 | 298.02 | 2.92 | 3.7 | 3.00 |
| 206-1256D | 206-1256D-7R-3,110-112 | 307.78 | 2.93 | 4.0 | 3.01 |
| 206-1256D | 206-1256D-8R-6,30-32 | 319.41 | 2.93 | 3.8 | 3.01 |
| 206-1256D | 206-1256D-9R-4,89-91 | 327.26 | 2.94 | 3.9 | 3.02 |
| 206-1256D | 206-1256D-10R-4,112-114 | 332.15 | 2.92 | 4.8 | 3.02 |
| 206-1256D | 206-1256D-11R-4,48-50 | 336.12 | 2.92 | 3.9 | 3.00 |
| 206-1256D | 206-1256D-12R-8,83-85 | 351.33 | 2.93 | 3.1 | 2.99 |
| 206-1256D | 206-1256D-13R-1,141-143 | 351.71 | 2.76 | 9.6 | 2.94 |
| 206-1256D | 206-1256D-13R-3,38-40 | 353.62 | 2.66 | 12.4 | 2.89 |
| 206-1256D | 206-1256D-13R-3,66-68 | 353.90 | 2.74 | 11.1 | 2.95 |
| 206-1256D | 206-1256D-15R-2,113-115 | 366.83 | 2.67 | 11.6 | 2.88 |
| 206-1256D | 206-1256D-16R-1,96-98 | 369.86 | 2.74 | 9.1 | 2.91 |
| 206-1256D | 206-1256D-18R-2,81-83 | 380.07 | 2.81 | 7.8 | 2.96 |
| 206-1256D | 206-1256D-19R-1,7-9 | 382.77 | 2.60 | 13.9 | 2.86 |
| 206-1256D | 206-1256D-20R-1,21-23 | 387.61 | 2.70 | 11.5 | 2.92 |
| 206-1256D | 206-1256D-21R-1,64-66 | 397.44 | 2.81 | 8.1 | 2.97 |
| 206-1256D | 206-1256D-22R-3,6-8 | 408.61 | 2.89 | 4.0 | 2.97 |
| 206-1256D | 206-1256D-23R-1,13-15 | 410.43 | 2.71 | 8.8 | 2.87 |
| 206-1256D | 206-1256D-24R-2,87-89 | 421.83 | 2.87 | 4.5 | 2.96 |
| 206-1256D | 206-1256D-25R-1,78-80 | 429.58 | 2.89 | 3.8 | 2.96 |
| 206-1256D | 206-1256D-26R-1,50-52 | 438.80 | 2.88 | 3.7 | 2.95 |
| 206-1256D | 206-1256D-26R-3,75-77 | 441.67 | 2.89 | 3.7 | 2.97 |
| 206-1256D | 206-1256D-27R-1,127-129 | 446.67 | 2.91 | 3.6 | 2.98 |
| 206-1256D | 206-1256D-27R-2,73-75 | 447.57 | 2.78 | 7.2 | 2.92 |
| 206-1256D | 206-1256D-28R-1,128-130 | 452.18 | 2.81 | 4.6 | 2.90 |
| 206-1256D | 206-1256D-31R-1,21-23 | 466.21 | 2.90 | 4.1 | 2.98 |
| 206-1256D | 206-1256D-32R-1,129-131 | 476.49 | 2.93 | 3.1 | 2.99 |
| 206-1256D | 206-1256D-32R-2,140-142 | 478.05 | 2.83 | 5.5 | 2.93 |
| 206-1256D | 206-1256D-32R-4,14-16 | 479.46 | 2.86 | 4.5 | 2.95 |
| 206-1256D | 206-1256D-32R-2,28-30 | 482.58 | 2.92 | 3.8 | 2.99 |
| 206-1256D | 206-1256D-34R-1,106-108 | 485.46 | 2.92 | 3.6 | 2.99 |
| 206-1256D | 206-1256D-35R-2,11-13 | 490.36 | 2.92 | 3.4 | 2.99 |
| 206-1256D | 206-1256D-36R-2,12-14 | 495.57 | 2.91 | 3.6 | 2.98 |
| 206-1256D | 206-1256D-37R-1,80-82 | 500.90 | 2.58 | 15.5 | 2.87 |
| 206-1256D | 206-1256D-38R-1,51-53 | 504.81 | 2.89 | 3.1 | 2.95 |
| 206-1256D | 206-1256D-39R-1,118-120 | 514.68 | 2.91 | 3.1 | 2.97 |
| 206-1256D | 206-1256D-41R-2,132-134 | 527.32 | 2.85 | 4.5 | 2.94 |
| 206-1256D | 206-1256D-42R-1,70-72 | 530.10 | 2.90 | 3.1 | 2.96 |
| 206-1256D | 206-1256D-42R-1,89-91 | 530.29 | 2.84 | 5.6 | 2.95 |
| 206-1256D | 206-1256D-42R-1,102-104 | 530.42 | 2.94 | 3.4 | 3.01 |
| 206-1256D | 206-1256D-43R-1,91-93 | 534.81 | 2.87 | 5.1 | 2.97 |
| 206-1256D | 206-1256D-44R-2,36-38 | 544.96 | 2.71 | 9.1 | 2.88 |
| 206-1256D | 206-1256D-46R-2,109-111 | 563.60 | 2.77 | 8.3 | 2.93 |
| 206-1256D | 206-1256D-46R-3,37-39 | 564.32 | 2.68 | 13.1 | 2.93 |
| 206-1256D | 206-1256D-47R-2,90-92 | 573.40 | 2.86 | 5.2 | 2.96 |
| 206-1256D | 206-1256D-48R-2,17-19 | 578.45 | 2.82 | 5.6 | 2.93 |
| 206-1256D | 206-1256D-49R-2,136-138 | 584.47 | 2.87 | 4.8 | 2.97 |
| 206-1256D | 206-1256D-50R-1,32-34 | 591.82 | 2.88 | 4.8 | 2.97 |
| 206-1256D | 206-1256D-51R-1,54-56 | 596.64 | 2.60 | 9.0 | 2.76 |
| 206-1256D | 206-1256D-52R-1,24-26 | 600.94 | 2.89 | 4.9 | 2.98 |
| 206-1256D | 206-1256D-53R-3,18-20 | 612.92 | 2.89 | 4.3 | 2.97 |
| 206-1256D | 206-1256D-54R-2,136-138 | 620.89 | 2.91 | 3.6 | 2.98 |
| 206-1256D | 206-1256D-55R-1,132-134 | 628.72 | 2.88 | 5.3 | 2.98 |
| 206-1256D | 206-1256D-56R-3,109-111 | 640.65 | 2.86 | 5.1 | 2.96 |
| 206-1256D | 206-1256D-57R-2,44-46 | 647.29 | 2.87 | 4.9 | 2.96 |
| 206-1256D | 206-1256D-57R-2,112-114 | 647.97 | 2.63 | 12.4 | 2.86 |
| 206-1256D | 206-1256D-57R-3,10-12 | 648.35 | 2.28 | 22.5 | 2.64 |
| 206-1256D | 206-1256D-58R-2,41-43 | 656.71 | 2.90 | 3.8 | 2.97 |
| 206-1256D | 206-1256D-59R-2,3-5 | 660.40 | 2.84 | 5.7 | 2.95 |
| 206-1256D | 206-1256D-60R-1,85-87 | 669.45 | 2.86 | 4.6 | 2.95 |
| 206-1256D | 206-1256D-61R-1,39-41 | 678.39 | 2.81 | 7.1 | 2.95 |
| 206-1256D | 206-1256D-61R-1,77-79 | 678.77 | 2.82 | 6.9 | 2.95 |
| 206-1256D | 206-1256D-63R-1,140-142 | 697.90 | 2.92 | 3.0 | 2.98 |
| 206-1256D | 206-1256D-64R-2,90-92 | 703.45 | 2.91 | 2.4 | 2.96 |
| 206-1256D | 206-1256D-65R-3,62-64 | 709.14 | 2.92 | 4.4 | 3.01 |
| 206-1256D | 206-1256D-66R-1,9-11 | 710.49 | 2.90 | 3.9 | 2.98 |
| 206-1256D | 206-1256D-67R-2,14-16 | 716.38 | 2.89 | 3.6 | 2.96 |
| 206-1256D | 206-1256D-68R-1,48-50 | 719.98 | 2.87 | 4.3 | 2.96 |
| 206-1256D | 206-1256D-69R-1,65-67 | 724.75 | 2.95 | 3.0 | 3.01 |
| 206-1256D | 206-1256D-70R-1,26-28 | 728.96 | 2.86 | 5.1 | 2.96 |
| 206-1256D | 206-1256D-71R-1,125-127 | 734.55 | 2.91 | 4.0 | 2.99 |
| 206-1256D | 206-1256D-72R-2,32-34 | 739.72 | 2.93 | 3.5 | 3.00 |
| 206-1256D | 206-1256D-73R-1,56-58 | 742.96 | 2.92 | 4.4 | 3.01 |
| 206-1256D | 206-1256D-74R-1,49-51 | 747.69 | 2.82 | 7.4 | 2.96 |