Rea, David K; Janecek, Thomas R (1982): (Table 3) Aeolian component of North Pacific pelagic sediments [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.761373, Supplement to: Rea, DK; Janecek, TR (1982): Late Cenozoic changes in atmospheric circulation deduced from North Pacific eolian sediments. Marine Geology, 49(1-2), 149-167, https://doi.org/10.1016/0025-3227(82)90034-2
Always quote citation above when using data! You can download the citation in several formats below.
Abstract:
Isolation and analysis of the eolian component of late Cenozoic pelagic sediments from the North Pacific provides direct information concerning changes in atmospheric circulation. A 50% increase in intensity of both the prevailing westerlies and the tradewinds coincides with increasing pole-to-equator temperature gradients resulting from the onset of northern hemisphere glaciation. At the same time, the mass flux of dust from continents to the North Pacific increased by a factor of 4.5, apparently reflecting significantly increased continental aridity associated with the late Cenozoic glacial ages.
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Median Latitude: 27.271512 * Median Longitude: 167.250554 * South-bound Latitude: 15.818500 * West-bound Longitude: 124.650800 * North-bound Latitude: 36.868500 * East-bound Longitude: -157.817330
Date/Time Start: 1973-06-26T00:00:00 * Date/Time End: 1978-08-02T00:00:00
Minimum Elevation: -5705.0 m * Maximum Elevation: -2525.0 m
Event(s):
31-292 * Latitude: 15.818500 * Longitude: 124.650800 * Date/Time: 1973-06-26T00:00:00 * Elevation: -2943.0 m * Penetration: 443.5 m * Recovery: 242.8 m * Location: North Pacific/Philippine Sea/CONT RISE * Campaign: Leg31 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 46 cores; 434 m cored; 9.5 m drilled; 56 % recovery
32-305 * Latitude: 32.002200 * Longitude: 157.850000 * Date/Time: 1973-08-29T00:00:00 * Elevation: -2903.0 m * Penetration: 640.5 m * Recovery: 212.2 m * Location: North Pacific/CONT RISE * Campaign: Leg32 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 67 cores; 622 m cored; 9 m drilled; 34.1 % recovery
32-310 * Latitude: 36.868500 * Longitude: 176.901500 * Date/Time: 1973-09-19T00:00:00 * Elevation: -3516.0 m * Penetration: 193.5 m * Recovery: 145.2 m * Location: North Pacific/CONT RISE * Campaign: Leg32 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 21 cores; 193.5 m cored; 0 m drilled; 75.1 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | Event label | Event | ||||
2 | AGE | Age | ka BP | Geocode | ||
3 | Sedimentation rate | SR | cm/ka | Rea, David K | ||
4 | Density, dry bulk | DBD | g/cm3 | Rea, David K | ||
5 | Accumulation rate, mass | MAR | g/cm2/ka | Rea, David K | ||
6 | Dust, aeolian | Dust | % | Rea, David K | (wt %) | |
7 | Accumulation rate, dust | DMAR | g/cm2/ka | Rea, David K | ||
8 | Median, grain size | D50 | phi | Rea, David K | Calculated after FOLK | Aeolian grain size |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
442 data points
Data
1 Event | 2 Age [ka BP] | 3 SR [cm/ka] | 4 DBD [g/cm3] | 5 MAR [g/cm2/ka] | 6 Dust [%] | 7 DMAR [g/cm2/ka] | 8 D50 [phi] |
---|---|---|---|---|---|---|---|
32-305 | 500 | 0.900 | 0.950 | 0.855 | 10.0 | 0.086 | 8.25 |
32-305 | 1500 | 0.400 | 1.070 | 0.428 | 7.6 | 0.033 | 8.35 |
32-305 | 2500 | 1.100 | 1.080 | 1.188 | 6.5 | 0.077 | 8.72 |
32-305 | 3500 | 1.300 | 1.090 | 1.417 | 4.7 | 0.067 | 8.64 |
32-305 | 4500 | 1.300 | 0.850 | 1.105 | 9.2 | 0.102 | 8.53 |
32-305 | 5500 | 0.500 | 0.960 | 0.480 | 9.1 | 0.044 | 8.82 |
32-305 | 6500 | 0.400 | 1.010 | 0.404 | 8.9 | 0.036 | 8.51 |
32-310 | 500 | 1.250 | 0.820 | 1.020 | 24.8 | 0.253 | 8.05 |
32-310 | 1500 | 1.250 | 0.770 | 0.960 | 17.1 | 0.164 | 8.16 |
32-310 | 2500 | 1.250 | 0.890 | 1.110 | 14.4 | 0.160 | 8.16 |
32-310 | 3500 | 1.250 | 0.940 | 1.180 | 4.7 | 0.055 | 8.40 |
32-310 | 5500 | 1.200 | 1.100 | 1.320 | 22.5 | 0.297 | 8.22 |
32-310 | 6500 | 0.600 | 1.100 | 0.660 | 21.1 | 0.139 | 8.31 |
32-310 | 7500 | 0.150 | 1.130 | 0.170 | 12.8 | 0.022 | 8.35 |
32-310 | 8500 | 0.150 | 1.130 | 0.170 | 9.0 | 0.015 | 8.35 |
32-310 | 9500 | 0.150 | 0.930 | 0.140 | 44.8 | 0.063 | 8.29 |
32-310 | 10500 | 0.200 | 0.950 | 0.190 | 8.9 | 0.017 | 8.60 |
GPC-3 | 300 | 0.243 | 1.307 | 0.318 | 57.7 | 0.183 | 8.70 |
GPC-3 | 1440 | 0.208 | 1.422 | 0.296 | 77.2 | 0.228 | 8.65 |
GPC-3 | 1500 | 0.167 | 1.449 | 0.242 | 77.8 | 0.188 | |
GPC-3 | 1880 | 0.158 | 1.402 | 0.221 | 77.3 | 0.171 | 8.64 |
GPC-3 | 1910 | 0.167 | 1.400 | 0.233 | 78.0 | 0.182 | |
GPC-3 | 1940 | 0.167 | 1.398 | 0.233 | 78.8 | 0.184 | |
GPC-3 | 2960 | 0.069 | 1.398 | 0.096 | 73.7 | 0.071 | 8.72 |
GPC-3 | 3860 | 0.029 | 1.325 | 0.038 | 73.6 | 0.028 | 8.80 |
GPC-3 | 4620 | 0.032 | 1.340 | 0.042 | 61.2 | 0.026 | 8.86 |
GPC-3 | 5640 | 0.029 | 1.360 | 0.040 | 66.1 | 0.026 | 8.79 |
GPC-3 | 6710 | 0.028 | 1.283 | 0.036 | 65.8 | 0.024 | 8.84 |
GPC-3 | 7790 | 0.028 | 1.363 | 0.038 | 57.7 | 0.022 | 8.83 |
GPC-3 | 8860 | 0.028 | 1.292 | 0.036 | 62.3 | 0.022 | 8.92 |
GPC-3 | 9930 | 0.028 | 1.251 | 0.035 | 44.2 | 0.015 | 8.76 |
GPC-3 | 11360 | 0.028 | 1.274 | 0.036 | 59.5 | 0.021 | |
GPC-3 | 12070 | 0.028 | 1.262 | 0.036 | 60.9 | 0.022 | 8.90 |
31-292 | 500 | 1.000 | 0.580 | 0.580 | 44.1 | 0.256 | 8.33 |
31-292 | 1500 | 1.100 | 1.090 | 1.200 | 41.9 | 0.503 | 8.44 |
31-292 | 2500 | 0.700 | 0.970 | 0.680 | 20.2 | 0.137 | |
31-292 | 3500 | 1.100 | 1.040 | 1.140 | 25.7 | 0.293 | 8.48 |
31-292 | 4500 | 0.800 | 1.000 | 0.800 | 22.4 | 0.179 | 8.55 |
31-292 | 5500 | 1.500 | 1.000 | 1.500 | 15.5 | 0.232 | 8.52 |
31-292 | 6500 | 0.450 | 1.070 | 0.480 | 11.6 | 0.056 | 8.72 |
31-292 | 10500 | 0.400 | 1.180 | 0.470 | 14.5 | 0.068 | |
31-292 | 11500 | 0.400 | 1.100 | 0.440 | 17.6 | 0.077 | |
31-292 | 12500 | 0.900 | 1.220 | 1.100 | 25.4 | 0.279 | |
31-292 | 13500 | 0.900 | 1.220 | 1.100 | 19.1 | 0.210 | |
31-292 | 14500 | 0.420 | 1.190 | 0.500 | 11.9 | 0.060 | |
31-292 | 17500 | 1.100 | 1.170 | 1.290 | 8.0 | 0.103 | |
31-292 | 18500 | 0.130 | 1.080 | 0.140 | 15.6 | 0.022 | |
31-292 | 19500 | 0.130 | 1.080 | 0.140 | 10.1 | 0.014 | |
31-292 | 21500 | 1.300 | 1.090 | 1.420 | 12.9 | 0.183 | |
31-292 | 22500 | 1.300 | 0.980 | 1.270 | 13.7 | 0.174 | |
31-292 | 23500 | 1.300 | 1.120 | 1.460 | 16.3 | 0.238 | |
31-292 | 24500 | 6.000 | 1.210 | 7.260 | 8.7 | 0.632 | |
31-292 | 25500 | 4.000 | 1.100 | 4.400 | 15.1 | 0.664 | |
31-292 | 26500 | 1.100 | 1.100 | 1.210 | 9.6 | 0.116 | |
31-292 | 27500 | 1.100 | 1.100 | 1.210 | 5.2 | 0.063 | |
31-292 | 28500 | 1.100 | 1.100 | 1.210 | 2.4 | 0.029 | |
31-292 | 29500 | 1.100 | 1.100 | 1.210 | 6.9 | 0.083 | |
31-292 | 30500 | 1.100 | 1.100 | 1.210 | 3.4 | 0.041 | |
31-292 | 31500 | 1.100 | 1.310 | 1.440 | 1.7 | 0.024 | |
31-292 | 32500 | 1.100 | 1.310 | 1.440 | 5.5 | 0.079 | |
31-292 | 33500 | 1.100 | 1.310 | 1.440 | 9.2 | 0.132 | |
31-292 | 34500 | 0.470 | 1.060 | 0.500 | 18.9 | 0.094 | |
31-292 | 35500 | 0.470 | 1.060 | 0.500 | 10.3 | 0.052 | |
31-292 | 38500 | 0.470 | 1.060 | 0.500 | 16.3 | 0.082 | |
31-292 | 40500 | 0.470 | 1.060 | 0.500 | 16.5 | 0.082 | |
31-292 | 41500 | 0.470 | 1.060 | 0.500 | 4.0 | 0.020 | |
31-292 | 44500 | 0.470 | 1.060 | 0.500 | 4.3 | 0.022 | |
62-463 | 10 | 0.240 | 1.140 | 0.274 | 10.2 | 0.028 | 8.45 |
62-463 | 730 | 0.210 | 1.070 | 0.225 | 13.0 | 0.029 | 8.35 |
62-463 | 1910 | 0.620 | 1.030 | 0.639 | 8.1 | 0.052 | 8.58 |
62-463 | 2000 | 0.620 | 1.100 | 0.682 | 6.2 | 0.042 | 8.50 |
62-463 | 2330 | 0.750 | 0.950 | 0.712 | 3.2 | 0.023 | 8.60 |
62-463 | 2720 | 0.750 | 0.850 | 0.638 | 3.8 | 0.024 | 8.56 |
62-463 | 2930 | 0.750 | 1.050 | 0.788 | 6.2 | 0.049 | 8.66 |
62-463 | 3800 | 0.200 | 1.240 | 0.248 | 4.3 | 0.011 | 8.59 |
62-463 | 4040 | 0.280 | 1.100 | 0.308 | 8.3 | 0.026 | 8.32 |
62-463 | 5430 | 0.110 | 1.010 | 0.111 | 3.6 | 0.004 | 8.59 |
62-463 | 6310 | 0.390 | 1.100 | 0.429 | 4.1 | 0.018 | 8.55 |
62-463 | 6830 | 0.390 | 1.100 | 0.429 | 2.0 | 0.009 | 8.75 |