Giry, Cyril; Felis, Thomas; Kölling, Martin; Scheffers, Sander R (2010): (Figure 4 and Figure 5) 10-year long Sr/Ca and stable isotope records from individual skeletal element of coral sample BON-9-A [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.753124, In supplement to: Giry, C et al. (2010): Geochemistry and skeletal structure of Diploria strigosa, implications for coral-based climate reconstruction. Palaeogeography, Palaeoclimatology, Palaeoecology, 298, 378-387, https://doi.org/10.1016/j.palaeo.2010.10.022
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Integrierte Analyse zwischeneiszeitlicher Klimadynamik (INTERDYNAMIK)
Funding:
German Research Foundation (DFG), grant/award no. 25575884: Integrierte Analyse zwischeneiszeitlicher Klimadynamik
Coverage:
Latitude: 12.081800 * Longitude: -68.231900
Minimum DISTANCE: 3.00 cm * Maximum DISTANCE: 10.05 cm
Event(s):
BON-9-A * Latitude: 12.081800 * Longitude: -68.231900 * Elevation: 5.0 m * Location: Southern Caribbean Sea, Bonaire * Campaign: CaribClim_Coral_2006 * Method/Device: Drilling/drill rig (DRILL) * Comment: Young fossil coral (1912 AD)
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DISTANCE | Distance | cm | Geocode | ||
2 | Diploria strigosa, Strontium/Calcium ratio | D. strigosa Sr/Ca | mmol/mol | Giry, Cyril | ICP-OES, Perkin-Elmer, Optima 3300R | |
3 | Diploria strigosa, δ18O | D. strigosa δ18O | ‰ PDB | Giry, Cyril | Mass spectrometer Finnigan MAT 251 | |
4 | Diploria strigosa, δ13C | D. strigosa δ13C | ‰ PDB | Giry, Cyril | Mass spectrometer Finnigan MAT 251 | |
5 | Comment | Comment | Giry, Cyril |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
2083 data points
Data
1 Distance [cm] | 2 D. strigosa Sr/Ca [mmol/mol] | 3 D. strigosa δ18O [‰ PDB] | 4 D. strigosa δ13C [‰ PDB] | 5 Comment |
---|---|---|---|---|
3.00 | 9.005 | -4.50 | -1.78 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.05 | 9.046 | -4.44 | -1.69 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.10 | 9.062 | -4.39 | -1.39 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.15 | 9.082 | -4.19 | -1.08 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.20 | 9.106 | -4.27 | -1.74 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.25 | 9.086 | -4.22 | -1.92 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.30 | 9.076 | -4.22 | -1.98 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.35 | 9.047 | -4.13 | -1.68 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.40 | 9.050 | -4.12 | -1.38 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.45 | 9.089 | -4.75 | -1.81 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.50 | 9.034 | -4.71 | -2.14 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.55 | 9.021 | -4.54 | -2.02 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.60 | 9.109 | -4.47 | -1.28 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.65 | 9.084 | -4.28 | -0.55 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.70 | 9.099 | -4.04 | -0.56 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.75 | 9.117 | -3.92 | 0.06 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.80 | 9.132 | -4.05 | -1.21 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.85 | 9.057 | -4.27 | -2.05 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.90 | 9.057 | -4.39 | -1.84 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.95 | 8.980 | -4.48 | -2.21 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.00 | 9.010 | -4.46 | -1.19 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.05 | 9.019 | -4.45 | -1.74 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.10 | 9.039 | -4.46 | -2.43 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.15 | 9.070 | -4.39 | -2.23 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.20 | 9.066 | -4.37 | -2.42 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.25 | 9.086 | -4.20 | -2.04 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.30 | 9.066 | -4.16 | -2.20 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.35 | 9.042 | -4.06 | -1.76 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.40 | 9.003 | -3.92 | -1.80 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.45 | 8.957 | -4.00 | -1.88 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.50 | 8.929 | -3.99 | -2.06 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.60 | 8.961 | -4.29 | -2.54 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.65 | 8.926 | -4.69 | -3.11 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.70 | -4.34 | -3.14 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) | |
4.75 | -4.49 | -3.12 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) | |
4.80 | 9.064 | -4.21 | -2.19 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.90 | 9.102 | -4.29 | -2.54 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
4.95 | 9.084 | -4.10 | -2.67 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.00 | 9.008 | -4.28 | -1.97 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.05 | 8.969 | -4.46 | -2.41 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.10 | 8.983 | -4.60 | -2.35 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.15 | 9.026 | -4.76 | -2.32 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.20 | 9.018 | -4.53 | -2.12 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.25 | 9.099 | -4.54 | -2.43 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.35 | 9.083 | -4.48 | -2.03 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.40 | 9.042 | -4.34 | -1.77 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.55 | 8.971 | -4.34 | -0.91 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.60 | 9.048 | -4.43 | -1.79 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.65 | 9.024 | -4.60 | -2.71 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.70 | 9.015 | -4.39 | -2.47 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.75 | 9.000 | -4.62 | -2.49 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.80 | 9.004 | -4.55 | -2.35 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.85 | 9.033 | -4.66 | -2.53 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.90 | 9.061 | -4.41 | -2.23 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
5.95 | 9.064 | -4.47 | -2.16 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.00 | 9.056 | -4.41 | -2.35 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.10 | 9.108 | -4.07 | -2.04 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.15 | 9.136 | -4.04 | -2.04 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.20 | 9.125 | -4.33 | -2.65 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.30 | 9.099 | -4.45 | -2.68 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.35 | 9.090 | -4.27 | -2.76 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.40 | 9.024 | -4.59 | -2.92 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.45 | 9.011 | -4.43 | -2.88 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.50 | 9.052 | -4.35 | -2.29 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.55 | 9.067 | -4.25 | -2.27 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.60 | 9.113 | -4.07 | -1.69 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.65 | 9.150 | -4.24 | -1.26 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.70 | 9.063 | -4.29 | -1.39 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.75 | 9.091 | -3.93 | -1.08 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.80 | 9.221 | -3.71 | -0.18 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.85 | 9.116 | -3.81 | -1.00 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.90 | 9.042 | -3.94 | -1.46 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
6.95 | 9.081 | -4.08 | -1.81 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.00 | 9.069 | -4.13 | -1.91 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.05 | 8.974 | -4.34 | -2.11 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.10 | 9.061 | -4.37 | -1.41 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.15 | 9.067 | -4.22 | -1.72 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.20 | 9.112 | -4.23 | -2.28 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.25 | 9.111 | -4.32 | -2.15 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.30 | 9.142 | -4.13 | -1.19 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.35 | 9.169 | -3.98 | -1.33 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.40 | 9.176 | -3.89 | -0.87 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.45 | 9.187 | -3.85 | -0.37 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.50 | 9.195 | -3.63 | -0.26 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.55 | 9.179 | -4.07 | -1.10 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.60 | 9.189 | -3.97 | -1.07 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.65 | 9.187 | -3.99 | -1.29 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.70 | 9.148 | -3.98 | -1.48 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.75 | 9.134 | -4.33 | -1.83 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.80 | 9.059 | -4.37 | -1.80 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
7.85 | 9.081 | -4.52 | -1.94 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.00 | 9.047 | -4.23 | -0.64 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.05 | 9.154 | -4.31 | -0.30 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.15 | 9.133 | -4.06 | -0.93 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.20 | 9.125 | -4.26 | -0.87 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.25 | 9.153 | -4.06 | -0.95 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.30 | 9.142 | -4.18 | -0.97 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.35 | 9.165 | -4.16 | -0.86 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.40 | 9.141 | -4.12 | -0.96 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.45 | 9.102 | -4.21 | -0.73 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.50 | 9.023 | -4.50 | -1.11 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.55 | 8.981 | -4.55 | -0.49 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.60 | 9.015 | -4.60 | -0.93 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.65 | 9.058 | -4.50 | -0.84 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.70 | 9.029 | -4.52 | -0.57 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.75 | 9.064 | -4.26 | 0.46 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.80 | 9.131 | -4.32 | -0.85 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.85 | 9.133 | -4.20 | -1.02 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.90 | 9.126 | -4.14 | -0.68 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
8.95 | 9.193 | -4.10 | -0.78 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.00 | 9.130 | -4.10 | -0.81 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.05 | 9.182 | -3.94 | -0.92 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.10 | 9.134 | -3.98 | -1.85 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.15 | 9.106 | -4.05 | -1.51 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.20 | 9.126 | -4.16 | -1.48 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.25 | 9.037 | -4.41 | -1.90 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.30 | 8.984 | -4.60 | -1.89 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.35 | 9.018 | -4.50 | -2.02 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.40 | 9.055 | -4.35 | -1.94 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.45 | 9.145 | -4.38 | -2.16 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.50 | 9.105 | -4.27 | -1.66 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.55 | 9.053 | -4.30 | -1.94 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.60 | 9.088 | -4.08 | -1.57 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.65 | 9.159 | -3.98 | -1.32 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.70 | 9.218 | -4.00 | -1.28 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.75 | 9.204 | -3.98 | -1.56 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.80 | 9.143 | -4.04 | -1.89 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.90 | 9.148 | -4.30 | -1.44 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
9.95 | 9.028 | -4.59 | -2.04 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
10.05 | 9.091 | -4.43 | -1.86 | Microdrilling the center of the thecal wall (drillbit diameter: 0.6 mm) |
3.06 | 9.137 | -3.94 | 0.65 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.11 | 9.123 | -3.89 | 0.18 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.16 | 9.157 | -3.98 | 0.51 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.22 | 9.148 | -3.91 | 0.41 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.27 | 9.180 | -3.96 | -0.30 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.32 | 9.119 | -3.87 | 0.11 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.37 | 9.114 | -3.78 | 0.28 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.42 | 9.129 | -3.55 | 1.30 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.47 | 9.053 | -3.56 | 0.65 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.52 | 9.156 | -3.98 | 0.40 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.57 | 9.086 | -4.15 | -0.42 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.62 | 9.163 | -4.15 | -0.21 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.67 | 9.153 | -4.13 | -0.29 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.72 | 9.099 | -3.91 | 0.13 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.78 | 9.169 | -3.70 | 0.45 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.83 | 9.120 | -3.82 | -0.09 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.88 | 9.128 | -3.68 | 0.09 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.93 | 9.101 | -3.54 | -0.19 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.98 | 9.045 | -3.75 | -0.12 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.03 | 9.040 | -3.76 | -0.31 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.08 | 9.092 | -4.03 | -0.09 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.13 | 9.171 | -4.05 | -0.03 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.18 | 9.118 | -4.09 | -0.85 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.24 | 9.106 | -4.17 | -1.15 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.29 | 9.124 | -4.13 | -0.81 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.34 | 9.128 | -3.92 | -0.83 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.39 | 9.163 | -3.79 | -0.67 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.44 | 9.120 | -3.68 | -0.16 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.49 | 9.139 | -3.84 | -0.31 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.54 | 9.108 | -3.72 | -0.18 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.59 | 9.148 | -3.86 | 0.02 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.64 | 9.061 | -4.07 | 0.40 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.69 | 9.082 | -4.17 | 0.00 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.74 | 9.110 | -4.25 | -0.14 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.80 | 9.131 | -4.11 | 0.05 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.85 | 9.140 | -4.13 | 0.37 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
4.90 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
4.95 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
5.00 | 9.123 | -3.95 | 0.66 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.05 | 9.099 | -4.21 | 0.01 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.10 | 9.089 | -4.21 | 0.09 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.15 | 9.139 | -4.08 | 0.16 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.20 | 9.153 | -3.96 | 0.47 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.26 | 9.140 | -4.05 | -0.22 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.31 | 9.138 | -3.93 | -0.07 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.36 | 9.142 | -4.19 | -0.61 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.41 | 9.093 | -4.07 | -0.24 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.46 | 9.156 | -3.87 | 0.04 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.51 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
5.56 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
5.61 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
5.66 | 9.091 | -3.74 | 0.89 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.71 | 9.084 | -4.18 | 0.10 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.76 | 9.105 | -4.05 | 0.20 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.82 | 9.110 | -4.29 | -0.60 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.87 | 9.085 | -4.54 | -1.07 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.92 | 9.145 | -4.43 | -0.85 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
5.97 | 9.095 | -4.33 | -1.00 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.02 | 9.112 | -4.31 | -0.80 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.07 | 9.153 | -3.88 | 0.01 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.12 | 9.141 | -4.15 | -0.95 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.17 | 9.126 | -3.97 | -0.81 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.22 | 9.147 | -4.06 | -0.67 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.28 | 9.149 | -4.24 | -0.96 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.33 | 9.155 | -4.48 | -1.37 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.38 | 9.158 | -4.59 | -1.48 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.43 | 9.147 | -4.58 | -1.85 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.48 | 9.173 | -4.50 | -1.61 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.53 | 9.171 | -4.42 | -1.66 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.58 | 9.168 | -4.18 | -0.66 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.63 | 9.139 | -4.29 | -1.04 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.68 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
6.73 | 9.202 | -4.22 | -0.84 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.78 | 9.169 | -4.27 | -0.81 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.84 | 9.119 | -4.13 | -0.91 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.89 | 9.197 | -4.02 | -0.63 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.94 | 9.188 | -4.12 | -0.35 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
6.99 | 9.155 | -4.28 | -0.50 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.04 | 9.129 | -4.00 | -0.11 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.09 | 9.189 | -4.09 | -0.04 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.14 | 9.202 | -4.21 | 0.03 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.19 | 9.206 | -4.26 | -0.32 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.24 | 9.190 | -4.34 | -0.99 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.30 | 9.201 | -4.13 | -0.55 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.35 | 9.191 | -3.92 | -0.59 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.40 | 9.230 | -4.18 | -0.72 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.45 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
7.50 | 9.220 | -4.08 | -0.96 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.55 | 9.183 | -4.01 | -0.48 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.60 | 9.197 | -3.71 | -0.36 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.65 | 9.213 | -3.88 | -0.76 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.70 | 9.219 | -3.89 | -0.44 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.75 | 9.173 | -3.81 | 0.04 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.80 | 9.109 | -4.06 | -0.37 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.86 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
7.91 | 9.124 | -4.28 | -0.53 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
7.96 | 9.151 | -4.16 | -0.71 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.01 | 9.143 | -4.37 | -1.00 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.06 | 9.128 | -4.04 | -1.04 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.11 | 9.126 | -4.33 | -1.20 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.16 | 9.166 | -4.32 | -1.03 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.21 | 9.193 | -4.14 | -0.94 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.26 | 9.156 | -3.99 | -0.82 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.32 | 9.259 | -3.92 | -0.41 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.37 | 9.225 | -3.59 | -0.01 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.42 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
8.47 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
8.52 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
8.57 | 9.080 | -4.09 | 0.93 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.62 | 9.116 | -3.81 | 1.21 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.67 | 9.122 | -4.12 | 0.55 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.72 | 9.167 | -4.13 | 0.64 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.77 | 9.188 | -4.18 | 0.22 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.82 | 9.219 | -3.94 | 0.26 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.88 | 9.214 | -4.13 | -0.40 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.93 | 9.225 | -3.93 | 0.12 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
8.98 | 9.211 | -3.92 | -0.10 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.03 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
9.08 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
9.13 | 9.214 | -3.49 | 0.75 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.18 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
9.23 | -3.45 | 1.57 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |
9.28 | 9.205 | -4.01 | 0.42 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.34 | 9.128 | -3.91 | 0.19 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.39 | 9.154 | -4.07 | -0.23 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.44 | 9.170 | -4.03 | -0.60 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.49 | 9.193 | -3.92 | -0.74 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.54 | 9.237 | -3.57 | 0.31 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.59 | 9.197 | -3.64 | -0.12 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.64 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) | |||
9.69 | 9.099 | -3.35 | 0.01 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.74 | 9.037 | -3.56 | -0.23 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.79 | 9.001 | -3.47 | 0.32 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.84 | 9.074 | -3.55 | 0.54 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.90 | 9.042 | -3.90 | -0.73 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
9.95 | 9.042 | -4.23 | -1.09 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
10.00 | 9.059 | -4.15 | -1.01 | Microgrinding the thecal wall (drillbit diameter: 1.4 mm) |
3.04 | 9.232 | -3.76 | 1.23 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.09 | 9.286 | -3.37 | 2.01 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.14 | 9.285 | -3.59 | 1.72 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.20 | 9.317 | -3.46 | 2.09 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.25 | 9.284 | -3.62 | 2.09 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.30 | 9.284 | -3.68 | 2.09 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.35 | 9.311 | -3.58 | 2.09 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.40 | 9.278 | -3.34 | 2.65 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.45 | 9.266 | -3.52 | 1.86 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.50 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
3.55 | 9.256 | -3.81 | 1.62 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.60 | 9.229 | -4.09 | 1.33 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.65 | 9.369 | -4.02 | 1.03 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.70 | 9.367 | -4.27 | 0.25 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.75 | 9.353 | -3.89 | 1.28 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.80 | 9.278 | -4.29 | 0.25 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.86 | 9.258 | -4.12 | 0.76 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.91 | 9.285 | -4.21 | 0.13 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.96 | 9.279 | -3.92 | 0.24 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.01 | 9.342 | -4.05 | 0.25 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.06 | 9.324 | -4.07 | 0.13 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.11 | 9.349 | -3.95 | 0.38 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.16 | 9.325 | -4.02 | -0.48 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.21 | 9.310 | -4.24 | 0.31 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.26 | 9.242 | -4.00 | 0.09 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.31 | 9.267 | -3.77 | 0.64 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.36 | 9.317 | -4.12 | 0.94 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.41 | 9.263 | -4.38 | -0.35 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.46 | 9.261 | -3.84 | 0.29 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.52 | 9.257 | -3.84 | 0.35 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.57 | 9.268 | -3.76 | 0.01 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.62 | 9.298 | -3.75 | 0.14 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.67 | 9.320 | -3.42 | 0.35 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.72 | 9.248 | -3.64 | 1.72 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.77 | 9.209 | -4.09 | 0.40 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.82 | 9.243 | -4.05 | 0.51 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.87 | 9.267 | -4.05 | 0.39 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.92 | 9.249 | -3.98 | 1.57 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
4.97 | 9.252 | -3.45 | 1.26 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.02 | 9.255 | -3.40 | 0.86 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.07 | 9.288 | -4.11 | -0.76 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.12 | 9.320 | -4.12 | -0.16 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.18 | 9.279 | -3.60 | 0.89 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.23 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
5.28 | 9.262 | -3.66 | 0.89 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.33 | 9.309 | -3.67 | 0.58 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.38 | 9.283 | -3.78 | -0.03 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.43 | 9.242 | -3.35 | 1.56 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.48 | 9.230 | -3.53 | 1.43 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.53 | 9.278 | -3.54 | 1.81 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.58 | 9.251 | -3.91 | 0.82 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.63 | 9.339 | -3.64 | 2.02 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.68 | 9.360 | -3.41 | 1.73 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.73 | 9.298 | -3.58 | 2.11 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.78 | 9.336 | -3.55 | 1.81 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.83 | 9.288 | -3.46 | 1.34 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.89 | 9.324 | -3.69 | 1.29 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.94 | 9.331 | -3.85 | 1.26 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
5.99 | 9.367 | -3.59 | 1.32 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.04 | 9.263 | -3.94 | 1.33 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.09 | 9.298 | -3.95 | 1.10 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.14 | 9.310 | -3.99 | 1.10 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.19 | 9.302 | -3.99 | 1.22 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.24 | 9.406 | -4.01 | 1.09 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.29 | 9.350 | -3.76 | 1.09 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.34 | 9.409 | -3.79 | 1.32 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.39 | 9.375 | -3.64 | 1.12 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.44 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
6.49 | 9.390 | -3.62 | 1.04 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.55 | 9.379 | -3.62 | 1.33 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.60 | 9.378 | -3.66 | 0.64 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.65 | 9.387 | -3.61 | 1.02 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.70 | 9.344 | -3.72 | 1.60 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.75 | 9.352 | -3.75 | 1.40 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.80 | 9.387 | -3.90 | 1.16 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.85 | 9.416 | -3.80 | 1.29 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.90 | 9.401 | -3.67 | 1.60 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
6.95 | 9.388 | -3.68 | 1.49 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.00 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
7.05 | 9.358 | -3.77 | 1.83 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.10 | 9.358 | -3.52 | 1.24 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.15 | 9.351 | -3.54 | 1.22 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.20 | 9.374 | -3.69 | 1.16 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.26 | 9.346 | -3.84 | 1.15 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.31 | 9.372 | -3.78 | 1.44 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.36 | 9.417 | -3.68 | 1.26 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.41 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
7.46 | 9.412 | -3.60 | 1.76 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.51 | 9.431 | -3.59 | 1.29 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.56 | 9.418 | -3.74 | 1.04 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.61 | 9.413 | -3.59 | 1.83 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.66 | 9.434 | -3.75 | 1.71 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.71 | 9.435 | -3.53 | 1.70 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.76 | 9.407 | -3.62 | 1.24 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.81 | 9.423 | -3.55 | 1.34 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.86 | 9.337 | -3.90 | 1.12 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.92 | 9.375 | -4.05 | 0.37 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
7.97 | 9.336 | -3.71 | 1.25 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.02 | 9.313 | -3.82 | 0.99 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.07 | 9.334 | -3.85 | 0.78 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.12 | 9.343 | -3.61 | 0.94 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.17 | 9.356 | -3.80 | 0.33 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.22 | 9.392 | -3.65 | 1.38 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.27 | 9.345 | -3.76 | 1.34 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.32 | 9.422 | -3.65 | 0.96 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.37 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
8.42 | 9.391 | -3.62 | 1.79 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.47 | 9.326 | -3.69 | 1.35 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.52 | 9.333 | -3.78 | 1.95 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.58 | 9.340 | -3.81 | 1.91 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.63 | 9.294 | -3.85 | 1.53 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.68 | 9.362 | -3.72 | 1.71 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.73 | 9.412 | -3.59 | 1.35 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.78 | 9.389 | -3.49 | 1.21 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.83 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
8.88 | 9.437 | -3.33 | 1.44 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.93 | 9.419 | -3.55 | 1.34 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
8.98 | 9.419 | -3.46 | 1.50 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.03 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
9.08 | 9.444 | -3.34 | 1.36 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.13 | 9.410 | -3.60 | 1.50 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.18 | 9.427 | -3.25 | 1.41 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.24 | 9.428 | -3.48 | 0.84 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.29 | 9.346 | -3.74 | 1.31 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.34 | 9.385 | -3.81 | 1.14 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.39 | 9.420 | -3.70 | 0.76 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.44 | 9.471 | -3.58 | 1.30 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.49 | 9.444 | -3.46 | 1.52 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.54 | 9.495 | -3.61 | 1.48 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.59 | Microgrinding the septa (drillbit diameter: 1.4 mm) | |||
9.64 | 9.490 | -3.57 | 1.85 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.69 | 9.516 | -3.46 | 1.07 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.74 | 9.499 | -3.36 | 1.49 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.79 | 9.436 | -3.81 | 1.07 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.84 | 9.432 | -3.67 | 1.60 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.89 | 9.459 | -3.50 | 1.18 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
9.95 | 9.467 | -3.42 | 1.61 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
10.00 | 9.429 | -3.24 | 1.91 | Microgrinding the septa (drillbit diameter: 1.4 mm) |
3.03 | 9.311 | -4.17 | -0.34 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.08 | 9.336 | -4.05 | -0.59 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.13 | 9.274 | -3.96 | -0.40 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.18 | 9.307 | -3.86 | -0.20 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.23 | 9.303 | -3.99 | -0.14 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.28 | Microgrinding the columella (drillbit diameter: 1.4 mm) | |||
3.33 | 9.345 | -3.99 | 0.04 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.38 | 9.295 | -4.21 | -0.39 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.43 | 9.287 | -4.06 | 0.20 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.48 | 9.261 | -4.09 | 0.16 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.53 | 9.301 | -4.20 | -0.36 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.58 | 9.352 | -3.76 | 0.07 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.63 | 9.369 | -4.03 | -0.60 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.68 | 9.374 | -3.78 | -0.62 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.73 | 9.354 | -4.06 | -0.82 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.78 | 9.273 | -4.49 | -1.21 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.84 | 9.290 | -4.25 | -1.41 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.89 | 9.298 | -4.47 | -1.86 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.94 | 9.359 | -4.30 | -1.81 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
3.99 | 9.347 | -4.03 | -1.38 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.04 | 9.296 | -4.02 | -1.65 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.09 | 9.352 | -4.01 | -1.53 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.14 | 9.318 | -4.33 | -1.68 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.19 | 9.196 | -4.32 | -2.03 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.24 | 9.241 | -4.49 | -1.99 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.29 | 9.226 | -4.51 | -1.39 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.34 | 9.262 | -4.19 | -1.32 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.39 | Microgrinding the columella (drillbit diameter: 1.4 mm) | |||
4.44 | 9.377 | -4.39 | -1.65 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.49 | Microgrinding the columella (drillbit diameter: 1.4 mm) | |||
4.54 | 9.308 | -4.12 | -1.51 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.59 | 9.319 | -3.71 | -1.25 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.64 | 9.322 | -3.80 | -1.33 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.69 | 9.258 | -3.73 | -1.34 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.74 | 9.210 | -3.92 | -1.40 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.80 | 9.209 | -3.93 | -1.16 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.85 | 9.260 | -4.01 | -0.57 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.90 | 9.327 | -4.06 | -1.33 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
4.95 | Microgrinding the columella (drillbit diameter: 1.4 mm) | |||
5.00 | 9.281 | -3.98 | -1.33 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.05 | 9.292 | -3.68 | -1.80 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.10 | 9.276 | -3.52 | -1.39 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.15 | 9.307 | -3.78 | -1.62 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.20 | 9.244 | -3.57 | -1.11 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.25 | 9.247 | -3.67 | -1.32 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.30 | 9.217 | -3.63 | -0.84 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.35 | 9.257 | -3.95 | -1.03 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.40 | 9.255 | -3.75 | -0.90 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.45 | 9.322 | -3.65 | -0.85 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.50 | 9.338 | -3.57 | -0.62 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.55 | 9.327 | -3.92 | -0.60 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.60 | 9.288 | -4.13 | -1.00 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.65 | 9.325 | -4.19 | -1.33 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.70 | 9.297 | -4.22 | -1.25 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.75 | 9.312 | -3.82 | -1.20 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.80 | 9.329 | -3.94 | -1.27 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.86 | 9.300 | -4.03 | -0.78 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.91 | 9.305 | -3.75 | -0.75 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
5.96 | 9.282 | -3.96 | -0.57 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.01 | 9.272 | -4.10 | -0.55 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.06 | 9.285 | -4.00 | -0.55 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.11 | 9.301 | -3.97 | -0.26 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.16 | 9.303 | -4.05 | -0.23 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.21 | Microgrinding the columella (drillbit diameter: 1.4 mm) | |||
6.26 | 9.360 | -4.08 | -0.51 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.31 | 9.381 | -4.22 | -1.15 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.36 | 9.362 | -4.25 | -1.52 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.41 | 9.345 | -4.03 | -1.60 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.46 | 9.414 | -3.96 | -1.14 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.51 | 9.415 | -3.80 | -1.17 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.56 | 9.363 | -3.97 | -1.26 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.61 | 9.335 | -4.06 | -1.06 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.66 | Microgrinding the columella (drillbit diameter: 1.4 mm) | |||
6.71 | 9.392 | -4.35 | -1.13 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.76 | 9.421 | -4.10 | -1.13 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.82 | 9.383 | -4.09 | -1.01 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.87 | 9.365 | -4.21 | -1.11 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.92 | 9.371 | -3.84 | -0.38 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
6.97 | 9.397 | -3.97 | -1.00 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.02 | 9.391 | -3.89 | -1.17 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.07 | 9.336 | -3.90 | -1.02 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.12 | 9.389 | -3.86 | -0.95 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.17 | 9.358 | -3.97 | -1.21 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.22 | 9.346 | -4.15 | -0.94 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.27 | 9.361 | -4.09 | -0.81 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.32 | 9.315 | -3.97 | -0.76 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.37 | 9.369 | -4.14 | -0.92 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.42 | 9.377 | -4.07 | -1.25 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.47 | 9.369 | -3.78 | -1.06 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.52 | 9.422 | -4.22 | -1.12 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.57 | 9.376 | -3.86 | -0.92 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.62 | 9.409 | -3.80 | -0.34 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.67 | 9.403 | -4.08 | -0.76 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.72 | 9.498 | -3.93 | -0.64 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.77 | 9.497 | -3.84 | -0.71 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.82 | 9.521 | -3.78 | -0.74 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.88 | 9.381 | -3.79 | -1.00 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.93 | 9.366 | -4.08 | -1.35 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
7.98 | 9.339 | -4.16 | -1.44 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.03 | 9.371 | -4.02 | -1.40 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.08 | 9.232 | -4.03 | -0.82 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.13 | 9.307 | -4.23 | -0.93 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.18 | 9.282 | -4.31 | -0.93 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.23 | 9.331 | -4.06 | -0.72 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.28 | 9.274 | -4.21 | -1.10 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.33 | 9.343 | -4.06 | -1.32 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.38 | 9.273 | -3.98 | -0.71 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.43 | 9.342 | -3.91 | -1.17 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.48 | 9.417 | -4.02 | -1.19 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.53 | 9.366 | -4.21 | -1.12 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.58 | 9.334 | -3.99 | -0.56 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.63 | 9.285 | -4.15 | -0.38 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.68 | 9.257 | -4.26 | -0.01 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.73 | 9.233 | -4.02 | 0.01 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.78 | 9.323 | -4.25 | -0.59 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.84 | 9.331 | -4.24 | -0.68 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.89 | 9.340 | -3.92 | -0.35 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.94 | 9.344 | -4.12 | -0.87 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
8.99 | 9.348 | -4.09 | -0.81 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.04 | 9.370 | -3.91 | -0.79 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.09 | 9.374 | -3.78 | -0.58 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.14 | 9.391 | -3.71 | -0.93 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.19 | 9.415 | -3.87 | -1.46 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.24 | 9.419 | -3.97 | -1.63 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.29 | 9.450 | -3.73 | -0.87 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.34 | 9.336 | -3.57 | -0.44 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.39 | 9.286 | -3.84 | -0.28 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.44 | 9.264 | -3.96 | -0.05 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.49 | 9.284 | -3.94 | -0.52 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.54 | 9.280 | -3.88 | -0.71 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.59 | 9.319 | -3.88 | -0.80 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.64 | 9.323 | -3.71 | -0.66 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.69 | 9.331 | -3.91 | -0.79 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.74 | 9.349 | -3.72 | -0.51 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.79 | 9.415 | -3.61 | -0.62 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.84 | 9.396 | -3.79 | -0.74 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.90 | 9.423 | -3.84 | -0.75 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
9.95 | 9.414 | -3.86 | -0.89 | Microgrinding the columella (drillbit diameter: 1.4 mm) |
10.00 | 9.304 | -3.80 | -0.93 | Microgrinding the columella (drillbit diameter: 1.4 mm) |