Westermann, Sebastian; Langer, Moritz; Boike, Julia (2011): Surface temperature measurements near Ny-Ålesund, Svalbard, Norway in 2008 with links to data files. PANGAEA, https://doi.org/10.1594/PANGAEA.746674, Supplement to: Westermann, S et al. (2011): Spatial and temporal variations of summer surface temperatures of high-arctic tundra on Svalbard - implications for MODIS LST based permafrost monitoring. Remote Sensing of Environment, 115(3), 908-922, https://doi.org/10.1016/j.rse.2010.11.018
Always quote above citation when using data! You can download the citation in several formats below.
The ground surface temperature is one of the key parameters that determine the thermal regime of permafrost soils in arctic regions. Due to remoteness of most permafrost areas, monitoring of the land surface temperature (LST) through remote sensing is desirable. However, suitable satellite platforms such as MODIS provide spatial resolutions, that cannot resolve the considerable small-scale heterogeneity of the surface conditions characteristic for many permafrost areas. This study investigates the spatial variability of summer surface temperatures of high-arctic tundra on Svalbard, Norway. A thermal imaging system mounted on a mast facilitates continuous monitoring of approximately 100 x 100 m of tundra with a wide variability of different surface covers and soil moisture conditions over the entire summer season from the snow melt until fall. The net radiation is found to be a control parameter for the differences in surface temperature between wet and dry areas. Under clear-sky conditions in July, the differences in surface temperature between wet and dry areas reach up to 10K. The spatial differences reduce strongly in weekly averages of the surface temperature, which are relevant for the soil temperature evolution of deeper layers. Nevertheless, a considerable variability remains, with maximum differences between wet and dry areas of 3 to 4K. Furthermore, the pattern of snow patches and snow-free areas during snow melt in July causes even greater differences of more than 10K in the weekly averages. Towards the end of the summer season, the differences in surface temperature gradually diminish. Due to the pronounced spatial variability in July, the accumulated degree-day totals of the snow-free period can differ by more than 60% throughout the study area. The terrestrial observations from the thermal imaging system are compared to measurements of the land surface temperature from the MODIS sensor. During periods with frequent clear-sky conditions and thus a high density of satellite data, weekly averages calculated from the thermal imaging system and from MODIS LST agree within less than 2K. Larger deviations occur when prolonged cloudy periods prevent satellite measurements. Futhermore, the employed MODIS L2 LST data set contains a number of strongly biased measurements, which suggest an admixing of cloud top temperatures. We conclude that a reliable gap filling procedure to moderate the impact of prolonged cloudy periods would be of high value for a future LST-based permafrost monitoring scheme. The occurrence of sustained subpixel variability of the summer surface temperature is a complicating factor, whose impact needs to be assessed further in conjunction with other spatially variable parameters such as the snow cover and soil properties.
Latitude: 78.921600 * Longitude: 11.855750
Date/Time Start: 2008-07-24T16:20:00 * Date/Time End: 2008-09-15T10:00:00
Minimum Elevation: 40.0 m * Maximum Elevation: 40.0 m
NYA_LH_2008 * Latitude: 78.921600 * Longitude: 11.855750 * Date/Time Start: 2008-07-24T12:00:00 * Date/Time End: 2008-09-15T12:00:00 * Elevation: 40.0 m * Location: Ny-Ålesund, Spitsbergen * Campaign: NYA_Meteorological_Obs * Basis: Koldewey Station (WMO01004) * Device: Thermal imaging system (TIS)
Structure of ascii-files: 1st line (filename, acquisition date (dd.mm.yyyy) and time (hh:mm:ss); the rest contains a matrix corresponding to the temperature measurements (i.e. thermal image); columns 0-384, rows 0-287, matrix entries are brightness temperature measurements for each pixel in °C. Brightness temperature is the temperature of a blackbody radiator that emits the same irradiance as received at the sensor.
|#||Name||Short Name||Unit||Principal Investigator||Method||Comment|
|2||Uniform resource locator/link to raw data file||URL raw||Boike, Julia||brightness temperature in spectral range from 7.5 to 14 µm, ASCII, all files for one day zipped|
|3||Uniform resource locator/link to image||URL image||Boike, Julia||screenshot|
|4||Uniform resource locator/link to thumbnail||URL thumb||Boike, Julia|
21867 data points