Pushcharovsky, Yury M; Peyve, Alexander A; Raznitsin, Yury N; Bazilevskaya, Elena S (1995): (Table 10) Chemical composition Fe-Mn crusts from the Chain and Romanch fracture zones [dataset]. Geological Institute, Russian Academy of Sciences, Moscow, PANGAEA, https://doi.org/10.1594/PANGAEA.737520, In supplement to: Pushcharovsky, YM et al. (1995): The Central Atlantic Fracture Zones. Geological Institute of the Russian Academy of Sciences, Transactions, vol. 495. Moscow, GEOS Publ. (S.D. Sokolov, Ed.), 164 pp
Always quote citation above when using data! You can download the citation in several formats below.
Project(s):
Archive of Ocean Data (ARCOD)
Coverage:
Median Latitude: 0.717641 * Median Longitude: -15.133324 * South-bound Latitude: 0.016700 * West-bound Longitude: -17.033300 * North-bound Latitude: 1.383300 * East-bound Longitude: -12.950000
Minimum Elevation: -4300.0 m * Maximum Elevation: -1000.0 m
Event(s):
ANS13-D06 * Latitude: 0.366700 * Longitude: -17.033300 * Elevation Start: -1000.0 m * Elevation End: -2700.0 m * Location: Central Atlantic * Campaign: ANS13 * Basis: Akademik Nikolaj Strakhov * Method/Device: Dredge (DRG)
ANS13-D10 * Latitude: 0.533300 * Longitude: -16.400000 * Elevation Start: -1400.0 m * Elevation End: -1500.0 m * Location: Central Atlantic * Campaign: ANS13 * Basis: Akademik Nikolaj Strakhov * Method/Device: Dredge (DRG)
ANS13-D11 * Latitude: 0.016700 * Longitude: -16.433300 * Elevation Start: -3400.0 m * Elevation End: -3500.0 m * Location: Central Atlantic * Campaign: ANS13 * Basis: Akademik Nikolaj Strakhov * Method/Device: Dredge (DRG)
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Event label | Event | ||||
| 2 | Latitude of event | Latitude | ||||
| 3 | Longitude of event | Longitude | ||||
| 4 | Elevation of event | Elevation | m | |||
| 5 | Elevation of event 2 | Elevation 2 | m | |||
| 6 | Sample code/label | Sample label | Pushcharovsky, Yury M | |||
| 7 | Thickness | Thick | mm | Pushcharovsky, Yury M | of crust, minimal | |
| 8 | Thickness | Thick | mm | Pushcharovsky, Yury M | of crust, maximal | |
| 9 | Sample comment | Sample comment | Pushcharovsky, Yury M | |||
| 10 | Manganese | Mn | % | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 11 | Iron | Fe | % | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 12 | Copper | Cu | % | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 13 | Nickel | Ni | % | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 14 | Cobalt | Co | % | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 15 | Zinc | Zn | % | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 16 | Lead | Pb | % | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 17 | Cadmium | Cd | mg/kg | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 18 | Lithium | Li | mg/kg | Pushcharovsky, Yury M | Atomic absorption spectrometry (AAS) | |
| 19 | Manganese/Iron ratio | Mn/Fe | Pushcharovsky, Yury M | Calculated |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
303 data points
Data
| 1 Event | 2 Latitude | 3 Longitude | 4 Elevation [m] | 5 Elevation 2 [m] | 6 Sample label | 7 Thick [mm] (of crust, minimal) | 8 Thick [mm] (of crust, maximal) | 9 Sample comment | 10 Mn [%] (Atomic absorption spectrometr...) | 11 Fe [%] (Atomic absorption spectrometr...) | 12 Cu [%] (Atomic absorption spectrometr...) | 13 Ni [%] (Atomic absorption spectrometr...) | 14 Co [%] (Atomic absorption spectrometr...) | 15 Zn [%] (Atomic absorption spectrometr...) | 16 Pb [%] (Atomic absorption spectrometr...) | 17 Cd [mg/kg] (Atomic absorption spectrometr...) | 18 Li [mg/kg] (Atomic absorption spectrometr...) | 19 Mn/Fe (Calculated) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ANS13-D06 | 0.3667 | -17.0333 | -1000 | -2700 | ANS13-D06 | 15.0 | 15.0 | upper part, 0-5 mm | 20.87 | 25.73 | 0.024 | 0.291 | 0.659 | 0.063 | 0.173 | 14 | 15 | 0.81 |
| ANS13-D06 | 0.3667 | -17.0333 | -1000 | -2700 | ANS13-D06(center) | 15.0 | 15.0 | central part, 5-10 mm | 24.21 | 22.10 | 0.025 | 0.334 | 0.833 | 0.053 | 0.234 | 16 | 15 | 1.09 |
| ANS13-D06 | 0.3667 | -17.0333 | -1000 | -2700 | ANS13-D06(lower) | 15.0 | 15.0 | lower part, 10-15 mm | 22.11 | 20.62 | 0.027 | 0.285 | 0.909 | 0.050 | 0.185 | 2 | 18 | 1.07 |
| ANS13-D06 | 0.3667 | -17.0333 | -1000 | -2700 | ANS13-D06/12 | 15.0 | 15.0 | 18.03 | 22.60 | 0.068 | 0.596 | 0.439 | 0.085 | 0.089 | 15 | 41 | 0.80 | |
| ANS13-D10 | 0.5333 | -16.4000 | -1400 | -1500 | ANS13-D10/2 | 15.0 | 15.0 | 20.25 | 22.43 | 0.034 | 0.357 | 0.727 | 0.066 | 0.182 | 6 | 16 | 0.90 | |
| ANS13-D10 | 0.5333 | -16.4000 | -1400 | -1500 | ANS13-D10/4 | 15.0 | 15.0 | 20.50 | 21.94 | 0.078 | 0.541 | 0.826 | 0.081 | 0.146 | 7 | 27 | 0.93 | |
| ANS13-D47 | 0.5333 | -16.2500 | -1300 | -1800 | ANS13-D47 | <0.5 | <0.5 | coating | 2.47 | 9.40 | 0.008 | 0.041 | 0.220 | 0.027 | 0.027 | 13 | 44 | 0.26 |
| ANS13-D48 | 0.5500 | -16.3500 | -1600 | -1800 | ANS13-D48 | 1.0 | 1.0 | 21.61 | 19.46 | 0.019 | 0.418 | 0.871 | 0.065 | 0.135 | 8 | 25 | 1.11 | |
| ANS13-D11 | 0.0167 | -16.4333 | -3400 | -3500 | ANS13-D11/1a | 8.0 | 8.0 | 9.26 | 32.50 | 0.036 | 0.047 | 0.098 | 0.057 | 0.010 | 8 | 15 | 0.28 | |
| ANS13-D12 | 0.0833 | -16.3833 | -2800 | ANS13-D12 | 1.0 | 1.0 | 8.03 | 21.44 | 0.019 | 0.057 | 0.121 | 0.045 | 0.024 | 5 | 21 | 0.37 | ||
| ANS13-D13 | 0.1167 | -16.5000 | -3300 | -3500 | ANS13-D13 | 1.0 | 1.0 | 8.77 | 20.12 | 0.024 | 0.044 | 0.114 | 0.045 | 0.027 | 2 | 20 | 0.43 | |
| ANS13-D14 | 0.1167 | -16.5333 | -2900 | -3000 | ANS13-D14/1a | 5.0 | 10.0 | 6.05 | 19.13 | 0.017 | 0.060 | 0.121 | 0.040 | 0.025 | 4 | 30 | 0.31 | |
| ANS13-D15 | 0.1500 | -17.0333 | -3800 | -3900 | ANS13-D15 | 1.0 | 1.0 | 13.59 | 16.00 | 0.037 | 0.225 | 0.265 | 0.049 | 0.064 | 6 | 21 | 0.85 | |
| ANS13-D37 | 1.2333 | -14.2000 | -3000 | -3400 | ANS13-D37 | 2.0 | 3.0 | 15.07 | 19.14 | 0.028 | 0.213 | 0.371 | 0.049 | 0.031 | 4 | 24 | 0.79 | |
| ANS13-D38 | 1.3833 | -14.1833 | -3400 | -3500 | ANS13-D38/1 | 40.0 | 40.0 | 15.19 | 29.69 | 0.061 | 0.187 | 0.288 | 0.067 | 0.085 | 3 | 18 | 0.51 | |
| ANS13-D38 | 1.3833 | -14.1833 | -3400 | -3500 | ANS13-D38/2 | 35.0 | 35.0 | 15.69 | 26.06 | 0.046 | 0.191 | 0.288 | 0.057 | 0.078 | 7 | 20 | 0.60 | |
| ANS13-D39 | 1.3000 | -14.3333 | -4100 | -4300 | ANS13-D39 | 5.0 | 5.0 | 17.78 | 22.27 | 0.085 | 0.032 | 0.144 | 0.069 | 0.056 | 4 | 35 | 0.80 | |
| ANS13-D19 | 1.2333 | -13.1000 | -3200 | -3700 | ANS13-D19 | 2.0 | 3.0 | 23.10 | 16.66 | 0.088 | 0.930 | 0.129 | 0.101 | 0.009 | 3 | 77 | 1.39 | |
| ANS13-D21 | 1.2333 | -13.1167 | -2800 | -3000 | ANS13-D21 | 8.0 | 10.0 | 4.94 | 17.98 | 0.020 | 0.066 | 0.053 | 0.075 | 0.017 | 4 | 21 | 0.27 | |
| ANS13-D22 | 1.1833 | -13.1500 | -2100 | -2200 | ANS13-D22 | 5.0 | 7.0 | 0.38 | 15.18 | 0.011 | 0.019 | 0.008 | 0.021 | 0.012 | 9 | 24 | 0.02 | |
| ANS13-D31 | 1.0500 | -12.9500 | -3000 | -3500 | ANS13-D31/1a | 3.0 | 3.0 | 8.28 | 20.45 | 0.034 | 0.326 | 0.083 | 0.047 | 0.031 | 6 | 24 | 0.40 | |
| ANS13-D26 | 1.1167 | -13.3167 | -2300 | -2400 | ANS13-D26/1 | 1.0 | 2.0 | 18.90 | 23.92 | 0.024 | 0.768 | 0.409 | 0.063 | 0.113 | 7 | 16 | 0.79 | |
| ANS13-D26 | 1.1167 | -13.3167 | -2300 | -2400 | ANS13-D26/2 | 5.0 | 5.0 | 7.29 | 17.65 | 0.029 | 0.131 | 0.159 | 0.040 | 0.043 | 3 | 27 | 0.41 |