Weber, Michael E; von Stackelberg, Ulrich; Marchig, Vesna; Wiedicke-Hombach, Michael; Grupe, B (2000): Grain density of sediment core SO106-190KG. PANGAEA, https://doi.org/10.1594/PANGAEA.354488, In supplement to: Weber, ME et al. (2000): Variability of surface sediments in the Peru Basin: dependence on water depth, productivity, bottom water flow, and seafloor topography. Marine Geology, 163(1-4), 169-184, https://doi.org/10.1016/S0025-3227(99)00103-6
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Weber, Michael E (1998): Estimation of biogenic carbonate and opal by continuous non-destructive measurements in deep-sea sediments from the eastern equatorial Pacific. Deep Sea Research Part I: Oceanographic Research Papers, 45(11), 1955-1975, https://doi.org/10.1016/S0967-0637(98)00028-4
Coverage:
Latitude: -7.055333 * Longitude: -88.470000
Date/Time Start: 1996-01-11T00:00:00 * Date/Time End: 1996-01-11T00:00:00
Minimum DEPTH, sediment/rock: 0.06 m * Maximum DEPTH, sediment/rock: 0.40 m
Event(s):
SO106/1_190KG (190KG) * Latitude: -7.055333 * Longitude: -88.470000 * Date/Time: 1996-01-11T00:00:00 * Elevation: -4178.0 m * Recovery: 0.42 m * Campaign: SO106/1 (ATESEPP) * Basis: Sonne * Method/Device: Box corer (Reineck) (BCR)
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Density, grain | Density grain | g/cm3 | Weber, Michael E | Calculated from weight/volume |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
35 data points
Data
1 Depth sed [m] | 2 Density grain [g/cm3] |
---|---|
0.06 | 1.140 |
0.07 | 1.183 |
0.08 | 1.180 |
0.09 | 1.168 |
0.10 | 1.202 |
0.11 | 1.207 |
0.12 | 1.214 |
0.13 | 1.211 |
0.14 | 1.212 |
0.15 | 1.236 |
0.16 | 1.194 |
0.17 | 1.214 |
0.18 | 1.199 |
0.19 | 1.190 |
0.20 | 1.199 |
0.21 | 1.189 |
0.22 | 1.196 |
0.23 | 1.188 |
0.24 | 1.185 |
0.25 | 1.190 |
0.26 | 1.196 |
0.27 | 1.182 |
0.28 | 1.180 |
0.29 | 1.195 |
0.30 | 1.193 |
0.31 | 1.187 |
0.32 | 1.194 |
0.33 | 1.197 |
0.34 | 1.198 |
0.35 | 1.198 |
0.36 | 1.181 |
0.37 | 1.171 |
0.38 | 1.199 |
0.39 | 1.175 |
0.40 | 1.190 |