Stein, Ruediger; Winkelmann, Daniel (2006): Shear strength measurements of undrained sediment core PS66/308-3 [dataset]. Alfred Wegener Institute, Helmholtz Centre for Polar and Marine Research, Bremerhaven, PANGAEA, https://doi.org/10.1594/PANGAEA.351449
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Stein, Ruediger (2005): Scientific cruise report of the Arctic Expedition ARK-XX/3 of RV Polarstern in 2004: Fram Strait, Yermak Plateau and East Greenland Continental Margin. Berichte zur Polar- und Meeresforschung = Reports on Polar and Marine Research, 517, 188 pp, https://doi.org/10.2312/BzPM_0517_2005
Project(s):
Coverage:
Latitude: 81.121700 * Longitude: 12.599500
Date/Time Start: 2004-09-04T10:47:00 * Date/Time End: 2004-09-04T10:47:00
Minimum DEPTH, sediment/rock: 0.020 m * Maximum DEPTH, sediment/rock: 5.365 m
Event(s):
PS66/308-3 * Latitude Start: 81.121700 * Longitude Start: 12.599500 * Latitude End: 81.121700 * Longitude End: 12.599500 * Date/Time Start: 2004-09-04T10:47:00 * Date/Time End: 2004-09-04T10:47:00 * Elevation Start: -2218.0 m * Elevation End: -2218.0 m * Penetration: 10.2 m * Recovery: 5.54 m * Campaign: ARK-XX/3 (PS66) * Basis: Polarstern * Method/Device: Gravity corer (GC)
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Shear strength, primary | Shear str | kPa | Stein, Ruediger | Rotovisco, Haake | Printer readings |
3 | Shear strength, primary | Shear str | kPa | Stein, Ruediger | Cone penetration test with pore pressure (ISSMGE, 1999) | 60g/60° |
4 | Shear strength, primary | Shear str | kPa | Stein, Ruediger | Cone penetration test with pore pressure (ISSMGE, 1999) | 100g/30° |
5 | Comment | Comment | Stein, Ruediger |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
252 data points
Data
1 Depth sed [m] | 2 Shear str [kPa] (Printer readings, Rotovisco, ...) | 3 Shear str [kPa] (60g/60°, Cone penetration tes...) | 4 Shear str [kPa] (100g/30°, Cone penetration te...) | 5 Comment |
---|---|---|---|---|
0.020 | stone, 0-4 cm depth | |||
0.050 | 13.5 | 8.0 | ||
0.100 | 6.0 | |||
0.150 | 6.0 | |||
0.200 | 12.0 | 7.0 | ||
0.250 | 5.5 | |||
0.300 | 16.0 | 6.0 | ||
0.350 | 5.0 | |||
0.360 | 5.0 | |||
0.370 | 4.5 | |||
0.380 | 25.0 | 4.0 | ||
0.390 | 4.0 | |||
0.400 | 49.0 | 4.0 | ||
0.410 | 3.5 | |||
0.420 | 3.0 | |||
0.430 | 2.0 | |||
0.440 | 2.0 | |||
0.450 | 102.0 | 2.5 | ||
0.455 | 1.5 | 3.5 | ||
0.460 | 3.0 | |||
0.465 | 3.0 | |||
0.470 | 4.0 | |||
0.480 | 4.0 | |||
0.490 | 3.0 | |||
0.500 | 4.0 | |||
0.510 | 9.0 | |||
0.520 | 10.0 | 8.0 | ||
0.565 | 8.5 | |||
0.590 | 12.5 | 8.0 | ||
0.640 | 8.0 | |||
0.690 | 8.5 | |||
0.705 | 8.5 | |||
0.720 | 9.0 | 7.0 | ||
0.735 | 7.0 | |||
0.790 | 7.0 | |||
0.840 | 13.0 | 6.5 | ||
0.890 | 6.0 | |||
0.940 | 7.0 | |||
0.990 | 6.0 | |||
1.040 | 20.0 | 5.0 | ||
1.090 | 5.0 | |||
1.110 | 37.0 | 3.0 | ||
1.130 | 5.5 | |||
1.150 | 6.0 | |||
1.170 | 5.0 | |||
1.190 | 35.5 | 4.0 | ||
1.210 | 3.5 | |||
1.230 | 4.0 | |||
1.250 | 4.0 | |||
1.260 | 21.0 | |||
1.270 | 6.0 | |||
1.290 | 6.0 | |||
1.340 | 7.0 | |||
1.365 | 7.0 | |||
1.370 | 15.5 | |||
1.390 | 6.0 | |||
1.415 | 6.0 | |||
1.440 | 6.0 | |||
1.470 | 11.0 | |||
1.490 | 7.0 | |||
1.565 | 5.0 | |||
1.590 | 21.5 | 5.0 | ||
1.615 | 3.0 | |||
1.640 | 2.0 | 4.0 | ||
1.665 | 4.0 | |||
1.680 | 71.0 | |||
1.690 | 4.5 | |||
1.710 | 5.5 | |||
1.730 | 6.5 | |||
1.740 | 5.0 | |||
1.750 | 54.0 | |||
1.760 | 8.0 | |||
1.770 | 7.0 | |||
1.780 | 6.5 | |||
1.790 | 48.5 | 6.0 | ||
1.800 | 6.0 | |||
1.810 | 7.0 | 16.5 | ||
1.820 | 6.5 | |||
1.840 | 14.0 | 6.0 | ||
1.890 | 5.5 | |||
1.940 | 5.0 | |||
1.990 | 5.0 | |||
2.040 | 20.5 | 4.5 | ||
2.090 | 5.0 | |||
2.140 | 5.0 | |||
2.190 | 5.0 | |||
2.240 | 20.5 | 5.0 | ||
2.290 | 4.5 | |||
2.340 | 4.5 | |||
2.390 | 5.5 | |||
2.410 | 4.5 | |||
2.440 | 21.5 | 5.0 | ||
2.490 | 5.0 | |||
2.510 | 4.0 | |||
2.525 | 4.0 | |||
2.565 | 4.5 | |||
2.590 | 26.0 | 4.0 | ||
2.640 | 4.0 | |||
2.690 | 4.5 | |||
2.710 | 24.5 | 3.0 | ||
2.720 | 4.0 | |||
2.735 | 4.0 | |||
2.760 | 4.5 | 10.0 | ||
2.790 | 4.0 | 9.5 | ||
2.805 | 3.0 | 7.0 | ||
2.810 | 55.0 | |||
2.815 | 3.0 | 7.0 | ||
2.820 | 2.5 | 6.5 | ||
2.830 | 4.5 | 11.0 | ||
2.850 | 4.0 | 10.0 | ||
2.870 | 30.0 | |||
2.880 | 4.0 | 10.5 | ||
2.905 | 10.0 | |||
2.920 | 13.0 | |||
2.930 | 15.0 | |||
2.940 | 13.0 | |||
2.965 | 13.0 | |||
2.990 | 5.5 | 13.0 | ||
3.015 | 5.5 | 12.0 | ||
3.040 | 19.5 | 12.5 | ||
3.090 | 11.0 | |||
3.140 | 11.0 | |||
3.190 | 11.5 | |||
3.240 | 24.5 | 11.0 | ||
3.290 | 10.0 | |||
3.340 | 9.5 | |||
3.370 | 10.0 | |||
3.390 | 9.5 | |||
3.440 | 25.0 | 10.0 | ||
3.490 | 10.0 | |||
3.590 | 10.0 | |||
3.640 | 25.5 | 4.0 | 9.5 | |
3.690 | 3.5 | 9.5 | ||
3.740 | 10.0 | |||
3.790 | 28.5 | 9.5 | ||
3.815 | 7.0 | |||
3.840 | 9.0 | |||
3.865 | 6.0 | |||
3.890 | 102.0 | 5.0 | ||
3.915 | 6.0 | |||
3.940 | 74.5 | 6.0 | ||
3.965 | 8.0 | |||
3.990 | 11.0 | |||
4.040 | 25.0 | 10.5 | ||
4.090 | 10.0 | |||
4.120 | 11.0 | |||
4.140 | 7.0 | |||
4.150 | 52.5 | 7.0 | ||
4.170 | 9.5 | |||
4.190 | 6.0 | |||
4.210 | 47.0 | 8.0 | ||
4.230 | 9.0 | |||
4.250 | 10.0 | |||
4.290 | 7.5 | |||
4.310 | 10.0 | |||
4.325 | 9.0 | |||
4.340 | 28.5 | 9.5 | ||
4.365 | 8.0 | |||
4.390 | 10.0 | |||
4.410 | 9.0 | |||
4.440 | 31.5 | 9.0 | ||
4.485 | 9.5 | |||
4.505 | 7.5 | |||
4.515 | 8.5 | |||
4.530 | 9.0 | |||
4.565 | 9.5 | |||
4.590 | 9.0 | |||
4.615 | 10.0 | |||
4.620 | 28.5 | |||
4.640 | 9.0 | |||
4.670 | 8.0 | |||
4.690 | 24.5 | 9.5 | ||
4.740 | 8.5 | |||
4.790 | 9.0 | |||
4.830 | 8.0 | |||
4.840 | 31.5 | 8.5 | ||
4.890 | 9.0 | |||
4.940 | 9.0 | |||
4.950 | 9.0 | |||
4.990 | 9.0 | |||
5.040 | 37.5 | 8.5 | ||
5.090 | 8.0 | |||
5.115 | 9.0 | |||
5.135 | 9.0 | |||
5.140 | 39.5 | |||
5.150 | 9.5 | |||
5.170 | 8.0 | |||
5.190 | 50.0 | 8.0 | ||
5.220 | 6.5 | |||
5.235 | 6.0 | |||
5.250 | 73.0 | 6.0 | ||
5.260 | 7.0 | |||
5.270 | 6.0 | |||
5.285 | 3.0 | |||
5.300 | 7.5 | |||
5.320 | 8.0 | |||
5.340 | 49.0 | |||
5.350 | 7.0 | |||
5.365 | 8.0 |