Gersonde, Rainer; Hodell, David A; Blum, Peter; Shipboard Scientific Party (2005): Hole/Core summary of ODP Site 177-1094 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.272241
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Gersonde, Rainer; Hodell, David A; Blum, Peter; et al. (1999): Proceedings of the Ocean Drilling Program, 177 Initial Reports. Proceedings of the Ocean Drilling Program, Ocean Drilling Program, 177, online, https://doi.org/10.2973/odp.proc.ir.177.1999
ODP/TAMU (2005): JANUS Database. Ocean Drilling Program, Texas A&M University, College Station TX 77845-9547, USA; (data copied from Janus 2005-02 to 2005-06), http://www-odp.tamu.edu/database/
Further details:
Project(s):
Ocean Drilling Program (ODP)
Coverage:
Latitude: -53.180350 * Longitude: 5.130333
Date/Time Start: 1998-01-20T00:00:00 * Date/Time End: 1998-01-20T00:00:00
Minimum Elevation: -2807.3 m * Maximum Elevation: -2807.3 m
Event(s):
177-1094 * Latitude: -53.180350 * Longitude: 5.130333 * Date/Time: 1998-01-20T00:00:00 * Elevation: -2807.3 m * Penetration: 441.8 m * Recovery: 306.1 m * Location: South Atlantic Ocean * Campaign: Leg177 * Basis: Joides Resolution * Method/Device: Composite Core (COMPCORE) * Comment: 46 cores; 421.7 m cored; 20.1 m drilled; 72.6% recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | Sample code/label | Sample label | Shipboard Scientific Party | DSDP/ODP/IODP sample designation | ||
2 | Section Top in meters below surface | Top | mbsf | Shipboard Scientific Party | ||
3 | Section Top in meters composite depth | Top | mcd | Shipboard Scientific Party | ||
4 | Cumulative Offset | Cum Offset | m | Shipboard Scientific Party | ||
5 | Differential Offset | Diff Offset | m | Shipboard Scientific Party | ||
6 | Interval Cored | Cored | m | Shipboard Scientific Party | ||
7 | Curatorial Length Cored | Cur | m | Shipboard Scientific Party | ||
8 | Recovery | Recovery | m | Shipboard Scientific Party | based on the sum of liner lengths for a given core | |
9 | Recovery | Recovery | % | Shipboard Scientific Party | based on the drillers cored interval over liner length recovery | |
10 | Sampling date | Sampling date | Shipboard Scientific Party | |||
11 | Comment | Comment | Shipboard Scientific Party |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
484 data points
Data
1 Sample label | 2 Top [mbsf] | 3 Top [mcd] | 4 Cum Offset [m] | 5 Diff Offset [m] | 6 Cored [m] | 7 Cur [m] | 8 Recovery [m] | 9 Recovery [%] | 10 Sampling date | 11 Comment |
---|---|---|---|---|---|---|---|---|---|---|
177-1094A-1H | 0.0 | 0.00 | 0.00 | 0.00 | 4.6 | 4.62 | 4.59 | 99.80 | 1998-01-21T04:30 | ADARA: ADARA bottom water temperature taken Crushed Liner: Hole at top of liner |
177-1094B-1H | 0.0 | 0.52 | 0.52 | 0.52 | 9.5 | 9.29 | 9.29 | 97.80 | 1998-01-22T00:35 | Crushed Liner: Hole top of liner. |
177-1094C-1H | 0.0 | 0.28 | 0.28 | 0.28 | 8.9 | 8.94 | 8.94 | 100.40 | 1998-01-22T05:00 | Busted top liner Crushed Liner: Hole on top of liner. |
177-1094A-2H | 4.6 | 6.14 | 1.54 | 1.54 | 9.5 | 9.20 | 9.20 | 96.80 | 1998-01-21T05:20 | |
177-1094C-2H | 8.9 | 10.62 | 1.72 | 1.44 | 9.5 | 9.92 | 9.95 | 104.70 | 1998-01-22T05:50 | |
177-1094B-2H | 9.5 | 10.52 | 1.02 | 0.50 | 9.5 | 9.42 | 9.42 | 99.20 | 1998-01-22T01:30 | Crushed Liner: Hole top of liner. |
177-1094A-3H | 14.1 | 16.52 | 2.42 | 0.88 | 9.5 | 8.26 | 8.26 | 86.90 | 1998-01-21T06:00 | Hole top of liner Crushed Liner: Hole at top of liner. |
177-1094C-3H | 18.4 | 20.16 | 1.76 | 0.04 | 9.5 | 9.64 | 9.64 | 101.50 | 1998-01-22T06:30 | broken top liner Crushed Liner: Hole top of liner. |
177-1094B-3H | 19.0 | 20.02 | 1.02 | 0.00 | 9.5 | 0.19 | 0.19 | 2.00 | 1998-01-22T02:25 | Tensor@0130-shattered liner Split Liner: Shattered liner. Tensor Tool. |
177-1094D-1H | 19.1 | 0.00 | 0.00 | 9.5 | 1998-01-22T13:35 | Blowed top liner Crushed Liner: Hole at top of liner. No Recovery. | ||||
177-1094A-4H | 23.6 | 26.96 | 3.36 | 0.94 | 9.5 | 8.26 | 8.26 | 86.90 | 1998-01-21T07:40 | Oriented - Adara tensor @0600 - Hole top of liner ADARA. Crushed Liner: Hole at top of liner. Tensor Tool. |
177-1094C-4H | 27.9 | 1.76 | 0.00 | 9.5 | 1998-01-22T07:10 | Split & blown up liner Crushed Liner: Shattered Liner. No Recovery. | ||||
177-1094B-4H | 28.5 | 31.37 | 2.87 | 1.85 | 9.5 | 4.68 | 4.68 | 49.30 | 1998-01-22T03:30 | Oriented Busted liner top end Split Liner: split entire length of recovery Tensor Tool. |
177-1094D-2H | 28.6 | 32.25 | 1.31 | 1.31 | 9.5 | 5.28 | 5.28 | 55.60 | 1998-01-22T14:15 | |
177-1094A-5H | 33.1 | 35.51 | 2.41 | -0.95 | 9.5 | 8.15 | 8.15 | 85.80 | 1998-01-21T08:25 | Oriented Hole top of liner Crushed Liner: Hole at top of liner Tensor Tool. |
177-1094C-5H | 37.4 | 39.07 | 1.67 | -0.09 | 9.5 | 8.35 | 8.35 | 87.90 | 1998-01-22T08:00 | Tensor @ 0710 Hole top of liner Crushed Liner: Hole top & bottom of liner. Tensor Tool. |
177-1094D-3H | 38.1 | 40.59 | 0.15 | -1.16 | 9.5 | 9.03 | 9.03 | 95.10 | 1998-01-22T14:55 | Gas trapped at top - hole in top of liner Crushed Liner: Hole at top of liner. |
177-1094A-6H | 42.6 | 45.56 | 2.96 | 0.55 | 9.5 | 7.90 | 7.90 | 83.20 | 1998-01-21T09:20 | Oriented & ADARA Hole top of liner ADARA. Crushed Liner: Hole at top of liner Tensor Tool. |
177-1094C-6H | 46.9 | 49.46 | 2.56 | 0.89 | 9.5 | 8.48 | 8.48 | 89.30 | 1998-01-22T08:50 | Liner broken top & bottom Split Liner: entire core split, broke between 5 & 6 |
177-1094D-4H | 47.6 | 50.49 | 0.55 | 0.40 | 9.5 | 8.49 | 8.49 | 89.40 | 1998-01-22T15:35 | Hole in top on liner Crushed Liner: Hole at top of liner |
177-1094A-7H | 52.1 | 54.20 | 2.10 | -0.86 | 9.5 | 8.79 | 8.79 | 92.50 | 1998-01-21T10:05 | Crushed Liner. |
177-1094C-7H | 56.4 | 2.56 | 0.00 | 9.5 | 1998-01-22T09:40 | Liner split and blown up - shattered - no core Crushed Liner: Shattered on bottom. No Recovery. | ||||
177-1094D-5H | 57.1 | 59.99 | 0.55 | 0.00 | 9.5 | 0.05 | 0.05 | 0.50 | 1998-01-22T16:15 | Hole in top of liner Crushed Liner: Hole top of liner. |
177-1094A-8H | 61.6 | 63.74 | 2.14 | 0.04 | 9.5 | 9.04 | 9.04 | 95.20 | 1998-01-21T11:00 | ADARA - Oriented Tensor @ 10:10 - liner split ADARA. Split Liner. Tensor Tool. |
177-1094C-8H | 65.9 | 68.24 | 2.34 | -0.22 | 7.2 | 1.28 | 1.28 | 17.80 | 1998-01-22T10:25 | Good liner allright- dril on big drop stone unable to pass |
177-1094D-6H | 66.6 | 68.35 | -0.59 | -1.14 | 9.5 | 9.53 | 9.53 | 100.30 | 1998-01-22T16:50 | Hole in top of liner |
177-1094A-9H | 71.1 | 73.90 | 2.80 | 0.66 | 9.5 | 8.07 | 8.07 | 84.90 | 1998-01-21T11:45 | Oriented Tensor Tool. |
177-1094D-7H | 76.1 | 78.72 | 0.28 | 0.87 | 9.5 | 6.22 | 6.22 | 65.50 | 1998-01-22T17:35 | |
177-1094A-10H | 80.6 | 82.94 | 2.34 | -0.46 | 9.5 | 9.24 | 9.24 | 97.30 | 1998-01-21T12:35 | Oriented/ADARA ADARA. Tensor Tool. |
177-1094D-8H | 85.6 | 88.92 | 0.98 | 0.70 | 9.5 | 7.63 | 7.63 | 80.30 | 1998-01-22T18:10 | Implode top end Crushed Liner: Imploded on top. |
177-1094A-11H | 90.1 | 92.90 | 2.80 | 0.46 | 9.5 | 7.93 | 7.93 | 83.50 | 1998-01-21T13:20 | Oriented Hole top of liner Crushed Liner: Hole in top of liner. Tensor Tool. |
177-1094D-9H | 95.1 | 97.66 | 0.22 | -0.76 | 9.5 | 5.83 | 5.83 | 61.40 | 1998-01-22T18:55 | Hole top end Crushed Liner: Hole top of liner. |
177-1094A-12H | 99.6 | 101.18 | 1.58 | -1.22 | 9.5 | 8.75 | 8.75 | 92.10 | 1998-01-21T14:10 | ADARA Hole in bottom of liner ADARA. Crushed Liner: Hole at bottom of liner. |
177-1094D-10H | 104.6 | 105.94 | -1.00 | -1.22 | 9.5 | 6.47 | 6.47 | 68.10 | 1998-01-22T19:35 | Busted top end Crushed Liner: Hole at top of liner |
177-1094A-13H | 109.1 | 111.54 | 2.44 | 0.86 | 9.5 | 7.82 | 7.82 | 82.30 | 1998-01-21T14:55 | Oriented Tensor Started @ 1410hrs - hole in top of liner Crushed Liner: Hole at top of liner. Tensor Tool. |
177-1094D-11H | 114.1 | 115.64 | -0.80 | 0.20 | 9.5 | 5.87 | 5.87 | 61.80 | 1998-01-22T20:15 | Split Liner split top to bottom Split Liner: Split all the way/Hole at top of liner |
177-1094A-14H | 118.6 | 121.41 | 2.81 | 0.37 | 9.5 | 5.07 | 5.07 | 53.40 | 1998-01-21T15:45 | Oriented two holes in the top of liner ADARA. Crushed Liner: Hole at top of liner Tensor Tool. |
177-1094D-12H | 123.6 | 125.14 | -0.80 | 0.00 | 9.5 | 8.08 | 8.08 | 85.10 | 1998-01-22T20:55 | Hole top & bottom Crushed Liner: Holes at top & bottom of liner |
177-1094A-15H | 128.1 | 130.42 | 2.32 | -0.49 | 9.5 | 9.27 | 9.27 | 97.60 | 1998-01-21T16:25 | Oriented Tensor Tool. |
177-1094D-13H | 133.1 | 134.98 | -0.46 | 0.34 | 9.5 | 4.30 | 4.30 | 45.30 | 1998-01-22T21:35 | Short Trip Knobbys after this core |
177-1094A-16H | 137.6 | 139.92 | 2.32 | 0.00 | 9.5 | 7.25 | 7.25 | 76.30 | 1998-01-21T17:15 | Pump Out/shattered liner ADARA. Line is twisted, orientation is questionable? Tensor Tool. |
177-1094D-14H | 142.6 | 146.32 | 1.38 | 1.84 | 9.5 | 8.66 | 8.77 | 92.30 | 1998-01-23T00:45 | |
177-1094A-17H | 147.1 | 2.32 | 0.00 | 3.0 | 1998-01-21T18:10 | busted liner Crushed Liner: Shattered liner No Recovery: incomplete stroke | ||||
177-1094A-18H | 150.1 | 152.62 | 2.52 | 0.20 | 8.5 | 7.49 | 7.49 | 88.10 | 1998-01-21T19:10 | Oriented dvtp after 18 |
177-1094D-15H | 152.1 | 153.99 | -0.45 | -1.83 | 9.5 | 8.95 | 8.95 | 94.20 | 1998-01-23T01:30 | |
177-1094D-16H | 161.6 | 163.49 | -0.45 | 0.00 | 9.5 | 6.26 | 6.26 | 65.90 | 1998-01-23T02:10 | Split Liner: Split top & bottom. |