Gersonde, Rainer; Hodell, David A; Blum, Peter; Shipboard Scientific Party (2005): Hole/Core summary of ODP Site 177-1091 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.272238
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Gersonde, Rainer; Hodell, David A; Blum, Peter; et al. (1999): Proceedings of the Ocean Drilling Program, 177 Initial Reports. Proceedings of the Ocean Drilling Program, Ocean Drilling Program, 177, online, https://doi.org/10.2973/odp.proc.ir.177.1999
ODP/TAMU (2005): JANUS Database. Ocean Drilling Program, Texas A&M University, College Station TX 77845-9547, USA; (data copied from Janus 2005-02 to 2005-06), http://www-odp.tamu.edu/database/
Further details:
Project(s):
Ocean Drilling Program (ODP)
Coverage:
Latitude: -47.094783 * Longitude: 5.919083
Date/Time Start: 1998-01-01T00:00:00 * Date/Time End: 1998-01-01T00:00:00
Minimum Elevation: -4363.3 m * Maximum Elevation: -4363.3 m
Event(s):
177-1091 * Latitude: -47.094783 * Longitude: 5.919083 * Date/Time: 1998-01-01T00:00:00 * Elevation: -4363.3 m * Penetration: 843.5 m * Recovery: 683.9 m * Location: South Atlantic Ocean * Campaign: Leg177 * Basis: Joides Resolution * Method/Device: Composite Core (COMPCORE) * Comment: 91 cores; 843.5 m cored; 0 m drilled; 81.1% recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | Sample code/label | Sample label | Shipboard Scientific Party | DSDP/ODP/IODP sample designation | ||
2 | Section Top in meters below surface | Top | mbsf | Shipboard Scientific Party | ||
3 | Section Top in meters composite depth | Top | mcd | Shipboard Scientific Party | ||
4 | Cumulative Offset | Cum Offset | m | Shipboard Scientific Party | ||
5 | Differential Offset | Diff Offset | m | Shipboard Scientific Party | ||
6 | Interval Cored | Cored | m | Shipboard Scientific Party | ||
7 | Curatorial Length Cored | Cur | m | Shipboard Scientific Party | ||
8 | Recovery | Recovery | m | Shipboard Scientific Party | based on the sum of liner lengths for a given core | |
9 | Recovery | Recovery | % | Shipboard Scientific Party | based on the drillers cored interval over liner length recovery | |
10 | Sampling date | Sampling date | Shipboard Scientific Party | |||
11 | Comment | Comment | Shipboard Scientific Party |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
998 data points
Data
1 Sample label | 2 Top [mbsf] | 3 Top [mcd] | 4 Cum Offset [m] | 5 Diff Offset [m] | 6 Cored [m] | 7 Cur [m] | 8 Recovery [m] | 9 Recovery [%] | 10 Sampling date | 11 Comment |
---|---|---|---|---|---|---|---|---|---|---|
177-1091A-1H | 0.0 | 0.00 | 0.00 | 0.00 | 6.9 | 6.89 | 6.89 | 99.90 | 1998-01-02T05:10 | Hole top of liner Crushed Liner: Hole Top of Liner |
177-1091B-1H | 0.0 | 0.00 | 0.00 | 0.00 | 7.8 | 7.79 | 7.79 | 99.90 | 1998-01-04T05:25 | Hole in liner middle & top Crushed Liner: Hole top of liner |
177-1091C-1H | 0.0 | 9.79 | 9.79 | 9.79 | 4.0 | 3.95 | 3.95 | 98.80 | 1998-01-05T13:15 | Mechanical release (pin sheared on run in) - reshoot mudline (D hole) |
177-1091D-1H | 0.0 | 7.99 | 7.99 | 7.99 | 3.6 | 3.61 | 3.61 | 100.30 | 1998-01-05T14:10 | Crushed Liner: Hole top of liner |
177-1091E-1H | 0.0 | 8.12 | 8.12 | 8.12 | 4.2 | 4.24 | 4.24 | 101.00 | 1998-01-06T15:00 | Crushed Liner: Hole top of liner |
177-1091D-2H | 3.6 | 15.52 | 11.92 | 3.93 | 9.5 | 3.07 | 3.07 | 32.30 | 1998-01-05T15:15 | Crushed Liner: Shattered Top |
177-1091E-2H | 4.2 | 14.22 | 10.02 | 1.90 | 9.5 | 5.42 | 5.42 | 57.10 | 1998-01-06T16:05 | Crushed Liner: Hole top of liner |
177-1091A-2H | 6.9 | 9.82 | 2.92 | 2.92 | 9.5 | 7.58 | 7.58 | 79.80 | 1998-01-02T06:35 | Split Liner. |
177-1091B-2H | 7.8 | 8.02 | 0.22 | 0.22 | 9.5 | 6.74 | 6.74 | 70.90 | 1998-01-04T06:25 | Crushed Liner: Hole top of liner |
177-1091D-3H | 13.1 | 23.51 | 10.41 | -1.51 | 9.5 | 3.97 | 3.97 | 41.80 | 1998-01-05T16:15 | Crushed Liner: Hole top of liner |
177-1091E-3H | 13.7 | 22.71 | 9.01 | -1.01 | 9.5 | 5.81 | 5.81 | 61.20 | 1998-01-06T17:00 | Crushed Liner: Hole top of liner Archive and working halves switched because of damage to the archive half. |
177-1091A-3H | 16.4 | 18.58 | 2.18 | -0.74 | 9.5 | 9.05 | 9.05 | 95.30 | 1998-01-02T09:00 | Oriented tensor @ 0740 Tensor Tool. |
177-1091B-3H | 17.3 | 16.16 | -1.14 | -1.36 | 9.5 | 6.57 | 6.57 | 69.20 | 1998-01-04T07:30 | Crushed Liner: Imploded on top |
177-1091D-4H | 22.6 | 32.38 | 9.78 | -0.63 | 9.5 | 4.90 | 4.90 | 51.60 | 1998-01-05T17:25 | |
177-1091E-4H | 23.2 | 32.20 | 9.00 | -0.01 | 9.5 | 3.87 | 3.87 | 40.70 | 1998-01-06T18:00 | Crushed Liner: Hole top of liner |
177-1091A-4H | 25.9 | 29.10 | 3.20 | 1.02 | 9.5 | 8.80 | 8.80 | 92.60 | 1998-01-02T10:05 | Oriented Tensor Tool. |
177-1091B-4H | 26.8 | 25.88 | -0.92 | 0.22 | 9.5 | 7.75 | 7.75 | 81.60 | 1998-01-04T08:40 | Oriented tensor @ 0730 Tensor Tool. |
177-1091D-5H | 32.1 | 44.63 | 12.53 | 2.75 | 9.5 | 4.12 | 4.12 | 43.40 | 1998-01-05T18:45 | Big implode/busted middle Crushed Liner: Imploded |
177-1091E-5H | 32.7 | 42.09 | 9.39 | 0.39 | 9.5 | 7.13 | 7.13 | 75.10 | 1998-01-06T19:00 | hole top of liner Crushed Liner: Hole top of liner |
177-1091A-5H | 35.4 | 38.45 | 3.05 | -0.15 | 9.5 | 8.75 | 8.75 | 92.10 | 1998-01-02T11:15 | Oriented Tensor Tool. |
177-1091B-5H | 36.3 | 36.18 | -0.12 | 0.80 | 9.5 | 7.22 | 7.22 | 76.00 | 1998-01-04T09:45 | Oriented Tensor Tool. |
177-1091D-6H | 41.6 | 51.34 | 9.74 | -2.79 | 9.5 | 8.25 | 8.25 | 86.80 | 1998-01-05T19:40 | hole top of liner Crushed Liner: Hole top of liner |
177-1091E-6H | 42.2 | 56.30 | 14.10 | 4.71 | 9.5 | 5.02 | 5.02 | 52.80 | 1998-01-06T20:00 | Big Impl top, coated bot 2k wire Crushed Liner: Big Implosion on Bottom |
177-1091A-6H | 44.9 | 49.11 | 4.21 | 1.16 | 9.5 | 9.17 | 9.17 | 96.50 | 1998-01-02T12:20 | Oriented Tensor Tool. |
177-1091B-6H | 45.8 | 45.57 | -0.23 | -0.11 | 9.5 | 8.29 | 8.29 | 87.30 | 1998-01-04T10:50 | Oriented changed inner & outer seals Crushed Liner: Hole top of liner Tensor Tool. |
177-1091D-7H | 51.1 | 60.42 | 9.32 | -0.42 | 9.5 | 7.94 | 7.94 | 83.60 | 1998-01-05T20:35 | liner ok |
177-1091A-7H | 54.4 | 58.95 | 4.55 | 0.34 | 9.5 | 9.36 | 9.36 | 98.50 | 1998-01-02T13:20 | Oriented Crushed Liner: Hole top of liner Tensor Tool. |
177-1091B-7H | 55.3 | 54.85 | -0.45 | -0.22 | 9.5 | 9.19 | 9.19 | 96.70 | 1998-01-04T11:55 | Oriented Crushed Liner: Hole top of liner Tensor Tool. |
177-1091D-8H | 60.6 | 68.24 | 7.64 | -1.68 | 9.5 | 7.28 | 7.28 | 76.60 | 1998-01-05T21:35 | liner broken top end Crushed Liner: Hole top of liner |
177-1091A-8H | 63.9 | 69.53 | 5.63 | 1.08 | 9.5 | 6.77 | 6.77 | 71.30 | 1998-01-02T14:25 | Oriented Tensor Tool. |
177-1091B-8H | 64.8 | 67.45 | 2.65 | 3.10 | 9.5 | 7.51 | 7.51 | 79.10 | 1998-01-04T12:50 | Crushed Liner: Hole top of liner Tensor Tool. |
177-1091D-9H | 70.1 | 80.63 | 10.53 | 2.89 | 9.5 | 9.69 | 9.69 | 102.00 | 1998-01-05T22:25 | liner ok |
177-1091A-9H | 73.4 | 78.59 | 5.19 | -0.44 | 9.5 | 8.13 | 8.13 | 85.60 | 1998-01-02T15:25 | Oriented Tensor Tool. |
177-1091B-9H | 74.3 | 75.71 | 1.41 | -1.24 | 9.5 | 8.63 | 8.63 | 90.80 | 1998-01-04T13:50 | Oriented Crushed Liner: Imploded on bottom Tensor Tool. |
177-1091D-10H | 79.6 | 92.50 | 12.90 | 2.37 | 9.5 | 7.73 | 7.73 | 81.40 | 1998-01-05T23:30 | Crushed Liner: Hole top of liner |
177-1091A-10H | 82.9 | 89.03 | 6.13 | 0.94 | 9.5 | 9.33 | 9.33 | 98.20 | 1998-01-02T16:30 | Oriented Started Tensor @ 1530 Hrs Crushed Liner: Hole top of liner Tensor Tool. |
177-1091B-10H | 83.8 | 85.89 | 2.09 | 0.68 | 9.5 | 7.95 | 7.95 | 83.70 | 1998-01-04T14:45 | Oriented Tensor Tool. |
177-1091D-11H | 89.1 | 102.49 | 13.39 | 0.49 | 9.5 | 7.80 | 7.80 | 82.10 | 1998-01-06T00:30 | hole top of liner Crushed Liner: Hole top of liner |
177-1091A-11H | 92.4 | 98.90 | 6.50 | 0.37 | 9.5 | 9.35 | 9.35 | 98.40 | 1998-01-02T17:30 | Oriented Tensor Tool. |
177-1091B-11H | 93.3 | 95.90 | 2.60 | 0.51 | 9.5 | 6.25 | 6.25 | 65.80 | 1998-01-04T15:45 | Oriented Crushed Liner: Hole top of liner Tensor Tool. |
177-1091D-12H | 98.6 | 112.15 | 13.55 | 0.16 | 9.5 | 8.66 | 8.66 | 91.20 | 1998-01-06T01:30 | liner ok |
177-1091A-12H | 101.9 | 109.90 | 8.00 | 1.50 | 9.5 | 7.45 | 7.45 | 78.40 | 1998-01-02T18:35 | Oriented liner ok Tensor Tool. |
177-1091B-12H | 102.8 | 105.59 | 2.79 | 0.19 | 9.5 | 8.72 | 8.72 | 91.80 | 1998-01-04T16:45 | Crushed Liner: Hole top of liner Tensor Tool. |
177-1091D-13H | 108.1 | 122.49 | 14.39 | 0.84 | 9.5 | 8.59 | 8.59 | 90.40 | 1998-01-06T02:30 | hole top of liner Crushed Liner: Hole top of liner |
177-1091A-13H | 111.4 | 118.68 | 7.28 | -0.72 | 9.5 | 9.78 | 9.78 | 102.90 | 1998-01-02T19:35 | Oriented liner ok Tensor Tool. |
177-1091B-13H | 112.3 | 115.15 | 2.85 | 0.06 | 9.5 | 9.84 | 9.84 | 103.60 | 1998-01-04T17:55 | Oriented Tensor Tool. |
177-1091D-14H | 117.6 | 132.14 | 14.54 | 0.15 | 9.5 | 9.06 | 9.06 | 95.40 | 1998-01-06T03:35 | split bottom Split Liner: Split on bottom |
177-1091A-14H | 120.9 | 130.25 | 9.35 | 2.07 | 9.5 | 9.69 | 9.69 | 102.00 | 1998-01-02T20:40 | Oriented Tensor Tool. |
177-1091B-14H | 121.8 | 126.06 | 4.26 | 1.41 | 9.5 | 5.32 | 5.32 | 56.00 | 1998-01-04T18:55 | split bottom, implode top Crushed Liner: Split/Imploded top |
177-1091D-15H | 127.1 | 143.31 | 16.21 | 1.67 | 9.5 | 9.10 | 9.10 | 95.80 | 1998-01-06T04:35 | top of liner cracked Split Liner: Split on bottom |
177-1091A-15H | 130.4 | 140.98 | 10.58 | 1.23 | 9.5 | 8.07 | 8.07 | 84.90 | 1998-01-02T21:55 | Oriented Tensor Tool. |
177-1091B-15H | 131.3 | 134.75 | 3.45 | -0.81 | 9.5 | 8.61 | 8.61 | 90.60 | 1998-01-04T19:50 | hole top of liner Crushed Liner: Hole top of liner |
177-1091D-16H | 136.6 | 153.31 | 16.71 | 0.50 | 9.5 | 9.05 | 9.05 | 95.30 | 1998-01-06T05:40 | hole top of liner Crushed Liner: Hole top of liner |
177-1091A-16H | 139.9 | 154.50 | 14.60 | 4.02 | 9.5 | 8.49 | 8.49 | 89.40 | 1998-01-03T00:25 | Oriented Tensor@2145 busted top pump out Crushed Liner: Busted/Pump out Tensor Tool. |
177-1091B-16H | 140.8 | 146.55 | 5.75 | 2.30 | 9.5 | 7.41 | 7.36 | 77.50 | 1998-01-04T20:45 | hole top of liner Crushed Liner: Hole top of liner |
177-1091D-17H | 146.1 | 164.56 | 18.46 | 1.75 | 9.5 | 9.21 | 9.21 | 96.90 | 1998-01-06T06:40 | Core broke between sec 6 & 7 |
177-1091A-17H | 149.4 | 162.85 | 13.45 | -1.15 | 9.5 | 8.42 | 8.42 | 88.60 | 1998-01-03T01:40 | Oriented liner ok Tensor Tool. |
177-1091B-17H | 150.3 | 157.26 | 6.96 | 1.21 | 9.5 | 6.60 | 6.60 | 69.50 | 1998-01-04T21:40 | big implode top end Crushed Liner: Large implosion at top |
177-1091D-18H | 155.6 | 175.25 | 19.65 | 1.19 | 9.5 | 8.42 | 8.42 | 88.60 | 1998-01-06T07:45 | Crushed Liner: Hole top of liner |
177-1091A-18H | 158.9 | 174.13 | 15.23 | 1.78 | 9.5 | 8.04 | 8.04 | 84.60 | 1998-01-03T02:50 | Oriented liner ok Tensor Tool. |
177-1091B-18H | 159.8 | 169.14 | 9.34 | 2.38 | 9.5 | 8.32 | 8.32 | 87.60 | 1998-01-04T22:35 | hole top liner Crushed Liner: Hole top of liner |
177-1091D-19H | 165.1 | 186.53 | 21.43 | 1.78 | 9.5 | 8.19 | 8.19 | 86.20 | 1998-01-06T08:45 | Crushed Liner: Hole top of liner |
177-1091A-19H | 168.4 | 185.27 | 16.87 | 1.64 | 9.5 | 7.35 | 7.35 | 77.40 | 1998-01-03T04:05 | Oriented 2 holes top end Crushed Liner: Hole top of liner Tensor Tool. |
177-1091B-19H | 169.3 | 181.25 | 11.95 | 2.61 | 9.5 | 8.12 | 8.12 | 85.50 | 1998-01-04T23:35 | liner ok Crushed Liner: Hole top of liner |
177-1091D-20H | 174.6 | 197.77 | 23.17 | 1.74 | 9.5 | 8.36 | 8.36 | 88.00 | 1998-01-06T09:50 | Crushed Liner: Hole top of liner |
177-1091A-20H | 177.9 | 196.08 | 18.18 | 1.31 | 9.5 | 6.90 | 6.90 | 72.60 | 1998-01-03T05:15 | Oriented split and busted top end Crushed Liner: Hole top of liner Tensor Tool. |
177-1091B-20H | 178.8 | 192.66 | 13.86 | 1.91 | 9.5 | 6.57 | 6.57 | 69.20 | 1998-01-05T00:30 | split, folded top end Crushed Liner: Split/Imploded Top |
177-1091D-21H | 184.1 | 208.54 | 24.44 | 1.27 | 9.5 | 9.30 | 9.30 | 97.90 | 1998-01-06T10:45 | Crushed Liner: Hole top of liner & bottom |
177-1091A-21H | 187.4 | 205.03 | 17.63 | -0.55 | 9.5 | 7.66 | 7.66 | 80.60 | 1998-01-03T06:45 | Oriented Crushed Liner: Hole top of liner Tensor Tool. |
177-1091B-21H | 188.3 | 202.51 | 14.21 | 0.35 | 9.5 | 7.98 | 7.98 | 84.00 | 1998-01-05T01:30 | hole top of liner Crushed Liner: Hole top of liner |
177-1091D-22H | 193.6 | 218.67 | 25.07 | 0.63 | 9.5 | 8.88 | 8.88 | 93.50 | 1998-01-06T12:10 | |
177-1091A-22H | 196.9 | 216.78 | 19.88 | 2.25 | 9.5 | 7.39 | 7.39 | 77.80 | 1998-01-03T08:05 | Oriented Crushed Liner: Hole top of liner Tensor Tool. |
177-1091B-22H | 197.8 | 213.56 | 15.76 | 1.55 | 9.5 | 7.78 | 7.78 | 81.90 | 1998-01-05T02:35 | hole top of liner Crushed Liner: Hole top of liner |
177-1091A-23H | 206.4 | 227.54 | 21.14 | 1.26 | 9.5 | 7.33 | 7.33 | 77.20 | 1998-01-03T11:20 | Oriented Tensor @ 10:05 Tensor Tool. |
177-1091B-23H | 207.3 | 222.62 | 15.32 | -0.44 | 9.5 | 6.49 | 6.49 | 68.30 | 1998-01-05T03:40 | 2 holes top end ckd wire Crushed Liner: Hole top of liner |
177-1091A-24H | 215.9 | 238.11 | 22.21 | 1.07 | 9.5 | 9.64 | 9.64 | 101.50 | 1998-01-03T12:35 | Oriented Tensor Tool. |
177-1091B-24H | 216.8 | 233.12 | 16.32 | 1.00 | 9.5 | 2.39 | 2.39 | 25.20 | 1998-01-05T04:45 | liner ok Split Liner: Split/Imploded Top |
177-1091A-25H | 225.4 | 247.61 | 22.21 | 0.00 | 9.5 | 9.84 | 9.84 | 103.60 | 1998-01-03T13:45 | Oriented Tensor Tool. |
177-1091B-25H | 226.3 | 242.27 | 15.97 | -0.35 | 9.5 | 7.10 | 7.10 | 74.70 | 1998-01-05T05:45 | Crushed Liner: Hole top of liner |
177-1091A-26H | 234.9 | 257.33 | 22.43 | 0.22 | 9.5 | 9.18 | 9.18 | 96.60 | 1998-01-03T14:50 | Oriented Tensor Tool. |
177-1091B-26H | 235.8 | 253.81 | 18.01 | 2.04 | 9.5 | 7.33 | 7.33 | 77.20 | 1998-01-05T06:45 | Crushed Liner: Hole top of liner |
177-1091A-27H | 244.4 | 266.39 | 21.99 | -0.44 | 9.5 | 9.88 | 9.88 | 104.00 | 1998-01-03T16:00 | oriented Mech. Sheared to get shot Tensor Tool. |
177-1091B-27H | 245.3 | 265.01 | 19.71 | 1.70 | 9.5 | 5.63 | 5.63 | 59.30 | 1998-01-05T07:50 | |
177-1091A-28H | 253.9 | 277.11 | 23.21 | 1.22 | 9.5 | 9.37 | 9.37 | 98.60 | 1998-01-03T17:25 | Oriented Tensor Tool. |
177-1091B-28H | 254.8 | 275.37 | 20.57 | 0.86 | 9.5 | 0.85 | 0.85 | 8.90 | 1998-01-05T08:55 | Crushed Liner: Hole top of liner |
177-1091A-29H | 263.4 | 286.35 | 22.95 | -0.26 | 9.5 | 9.80 | 9.80 | 103.20 | 1998-01-03T18:40 | Tensor Tool. |
177-1091B-29H | 264.3 | 281.21 | 16.91 | -3.66 | 9.5 | 4.62 | 4.62 | 48.60 | 1998-01-05T10:00 | Crushed Liner: Hole top of liner |
177-1091A-30H | 272.9 | 296.11 | 23.21 | 0.26 | 9.5 | 8.58 | 8.58 | 90.30 | 1998-01-03T21:40 | oriented Started Tensor @ 2020Hrs Tensor Tool. |
177-1091A-31H | 282.4 | 305.61 | 23.21 | 0.00 | 9.5 | 7.41 | 7.41 | 78.00 | 1998-01-03T23:05 | Oriented split top to bot, hole top end Crushed Liner: Hole top of liner. Top split. Tensor Tool. |
177-1091A-32H | 291.9 | 315.11 | 23.21 | 0.00 | 9.5 | 7.32 | 7.32 | 77.10 | 1998-01-04T00:10 | imp bot, 2 holes top end Crushed Liner: Hole top of liner Tensor Tool. |
177-1091A-33H | 301.4 | 324.61 | 23.21 | 0.00 | 9.5 | 9.00 | 9.00 | 94.70 | 1998-01-04T01:15 | Oriented hole top end Crushed Liner: Hole top of liner Tensor Tool. |