Prell, Warren L; Niitsuma, Nobuaki; Shipboard Scientific Party (2005): Hole/Core summary of ODP Site 117-723 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.271872
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
ODP/TAMU (2005): JANUS Database. Ocean Drilling Program, Texas A&M University, College Station TX 77845-9547, USA; (data copied from Janus 2005-02 to 2005-06), http://www-odp.tamu.edu/database/
Prell, Warren L; Niitsuma, Nobuaki; et al. (1989): Proceedings of the Ocean Drilling Program, 117 Initial Reports. Proceedings of the Ocean Drilling Program, Ocean Drilling Program, 117, 1236 pp, https://doi.org/10.2973/odp.proc.ir.117.1989
Further details:
Project(s):
Ocean Drilling Program (ODP)
Coverage:
Latitude: 18.051800 * Longitude: 57.608700
Date/Time Start: 1987-09-15T00:00:00 * Date/Time End: 1987-09-20T00:00:00
Minimum Elevation: -816.3 m * Maximum Elevation: -816.3 m
Event(s):
117-723 * Latitude: 18.051800 * Longitude: 57.608700 * Date/Time Start: 1987-09-15T00:00:00 * Date/Time End: 1987-09-20T00:00:00 * Elevation: -816.3 m * Penetration: 938.1 m * Recovery: 676.3 m * Location: Arabian Sea * Campaign: Leg117 * Basis: Joides Resolution * Method/Device: Composite Core (COMPCORE) * Comment: 98 cores; 909.2 m cored; 0 m drilled; 74.4% recovery
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | Sample code/label | Sample label | Shipboard Scientific Party | DSDP/ODP/IODP sample designation | ||
| 2 | Section Top in meters below surface | Top | mbsf | Shipboard Scientific Party | ||
| 3 | Section Top in meters composite depth | Top | mcd | Shipboard Scientific Party | ||
| 4 | Cumulative Offset | Cum Offset | m | Shipboard Scientific Party | ||
| 5 | Differential Offset | Diff Offset | m | Shipboard Scientific Party | ||
| 6 | Interval Cored | Cored | m | Shipboard Scientific Party | ||
| 7 | Curatorial Length Cored | Cur | m | Shipboard Scientific Party | ||
| 8 | Recovery | Recovery | m | Shipboard Scientific Party | based on the sum of liner lengths for a given core | |
| 9 | Recovery | Recovery | % | Shipboard Scientific Party | based on the drillers cored interval over liner length recovery | |
| 10 | Comment | Comment | Shipboard Scientific Party |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
860 data points
Data
| 1 Sample label | 2 Top [mbsf] | 3 Top [mcd] | 4 Cum Offset [m] | 5 Diff Offset [m] | 6 Cored [m] | 7 Cur [m] | 8 Recovery [m] | 9 Recovery [%] | 10 Comment |
|---|---|---|---|---|---|---|---|---|---|
| 117-723A-1H | 0.0 | 0.00 | 0.00 | 0.00 | 7.8 | 7.88 | 7.88 | 101.00 | |
| 117-723B-1H | 0.0 | 0.00 | 0.00 | 0.00 | 4.3 | 4.34 | 4.29 | 99.80 | MUD LINE ! |
| 117-723C-1H | 0.0 | 0.00 | 0.00 | 0.00 | 9.2 | 9.21 | 9.20 | 100.00 | CORE CUT INTO 50 CM SECTIONS & FROZEN WHOLE ROUND |
| 117-723B-2H | 4.3 | 4.00 | -0.30 | -0.30 | 9.7 | 9.93 | 9.93 | 102.40 | |
| 117-723A-2H | 7.8 | 7.20 | -0.60 | -0.60 | 9.7 | 9.87 | 9.87 | 101.80 | |
| 117-723C-2H | 9.2 | 9.20 | 0.00 | 0.00 | 9.7 | 10.01 | 10.01 | 103.20 | CORE CUT INTO 50 CM SECTIONS & FROZEN WHOLE ROUND |
| 117-723B-3H | 14.0 | 13.80 | -0.20 | 0.10 | 9.6 | 9.97 | 9.97 | 103.90 | |
| 117-723A-3H | 17.5 | 17.80 | 0.30 | 0.90 | 9.6 | 9.86 | 9.86 | 102.70 | |
| 117-723C-3H | 18.9 | 18.90 | 0.00 | 0.00 | 9.6 | 9.79 | 9.79 | 102.00 | CORE CUT INTO 50 CM SECTIONS & FROZEN WHOLE ROUND |
| 117-723B-4H | 23.6 | 24.10 | 0.50 | 0.70 | 9.7 | 9.89 | 9.83 | 101.30 | |
| 117-723A-4H | 27.1 | 27.90 | 0.80 | 0.50 | 9.7 | 9.85 | 9.90 | 102.10 | |
| 117-723C-4H | 28.5 | 28.50 | 0.00 | 0.00 | 9.7 | 10.00 | 10.00 | 103.10 | CORE CUT INTO 50 CM SECTIONS & FROZEN WHOLE ROUND |
| 117-723B-5H | 33.3 | 33.30 | 0.00 | 0.00 | 9.6 | 10.03 | 10.00 | 104.20 | |
| 117-723A-5H | 36.8 | 36.80 | 0.00 | 0.00 | 9.6 | 9.89 | 9.82 | 102.30 | |
| 117-723C-5H | 38.2 | 38.20 | 0.00 | 0.00 | 9.6 | 10.20 | 10.13 | 105.50 | CORE CUT INTO 50 CM SECTIONS & FROZEN WHOLE ROUND |
| 117-723B-6H | 42.9 | 42.90 | 0.00 | 0.00 | 9.7 | 10.36 | 10.36 | 106.80 | |
| 117-723A-6H | 46.4 | 46.40 | 0.00 | 0.00 | 9.7 | 10.20 | 10.20 | 105.20 | |
| 117-723C-6H | 47.8 | 47.80 | 0.00 | 0.00 | 9.7 | 10.32 | 10.32 | 106.40 | CORE CUT INTO 50 CM SECTIONS & FROZEN WHOLE ROUND |
| 117-723B-7H | 52.6 | 52.60 | 0.00 | 0.00 | 9.7 | 10.48 | 10.45 | 107.70 | |
| 117-723A-7H | 56.1 | 56.10 | 0.00 | 0.00 | 9.7 | 10.54 | 10.54 | 108.70 | |
| 117-723C-7H | 57.5 | 57.50 | 0.00 | 0.00 | 9.7 | 11.62 | 11.62 | 119.80 | CORE CUT INTO 50 CM SECTIONS & FROZEN WHOLE ROUND |
| 117-723B-8H | 62.3 | 62.30 | 0.00 | 0.00 | 9.6 | 10.25 | 10.25 | 106.80 | |
| 117-723A-8H | 65.8 | 65.80 | 0.00 | 0.00 | 9.6 | 10.12 | 10.12 | 105.40 | |
| 117-723C-8H | 67.2 | 67.20 | 0.00 | 0.00 | 9.6 | 11.10 | 11.10 | 115.60 | CORE CUT INTO 50 CM SECTIONS & FROZEN WHOLE ROUND |
| 117-723B-9H | 71.9 | 71.90 | 0.00 | 0.00 | 9.7 | 10.21 | 10.21 | 105.30 | |
| 117-723A-9H | 75.4 | 75.40 | 0.00 | 0.00 | 9.7 | 10.19 | 10.11 | 104.20 | |
| 117-723B-10X | 81.6 | 81.60 | 0.00 | 0.00 | 9.6 | 9.53 | 9.53 | 99.30 | |
| 117-723A-10X | 85.1 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723B-11X | 91.2 | 91.20 | 0.00 | 0.00 | 9.5 | 9.87 | 9.87 | 103.90 | VOIDS THROUGHOUT |
| 117-723A-11X | 94.8 | 94.80 | 0.00 | 0.00 | 9.6 | 2.63 | 2.63 | 27.40 | |
| 117-723B-12X | 100.7 | 100.70 | 0.00 | 0.00 | 9.6 | 8.83 | 8.83 | 92.00 | CRACKED LINER, RECONST CORE |
| 117-723A-12X | 104.4 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723B-13X | 110.3 | 110.30 | 0.00 | 0.00 | 9.6 | 8.51 | 8.51 | 88.60 | |
| 117-723A-13X | 114.1 | 114.10 | 0.00 | 0.00 | 9.7 | 6.96 | 6.96 | 71.80 | |
| 117-723B-14X | 119.9 | 119.90 | 0.00 | 0.00 | 9.7 | 9.39 | 9.39 | 96.80 | |
| 117-723A-14X | 123.8 | 123.80 | 0.00 | 0.00 | 9.6 | 6.83 | 6.83 | 71.10 | |
| 117-723B-15X | 129.6 | 129.60 | 0.00 | 0.00 | 9.6 | 9.29 | 9.29 | 96.80 | |
| 117-723A-15X | 133.4 | 133.40 | 0.00 | 0.00 | 9.7 | 9.81 | 9.78 | 100.80 | |
| 117-723B-16X | 139.2 | 139.20 | 0.00 | 0.00 | 9.7 | 4.74 | 4.74 | 48.90 | |
| 117-723A-16X | 143.1 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723B-17X | 148.9 | 148.90 | 0.00 | 0.00 | 9.7 | 9.65 | 9.65 | 99.50 | |
| 117-723A-17X | 152.8 | 152.80 | 0.00 | 0.00 | 9.6 | 3.64 | 3.55 | 37.00 | |
| 117-723B-18X | 158.6 | 158.60 | 0.00 | 0.00 | 9.6 | 9.72 | 9.72 | 101.30 | |
| 117-723A-18X | 162.4 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723B-19X | 168.2 | 168.20 | 0.00 | 0.00 | 9.7 | 10.43 | 10.37 | 106.90 | |
| 117-723A-19X | 172.1 | 172.10 | 0.00 | 0.00 | 9.7 | 10.50 | 10.50 | 108.20 | |
| 117-723B-20X | 177.9 | 177.90 | 0.00 | 0.00 | 9.7 | 10.13 | 10.13 | 104.40 | |
| 117-723A-20X | 181.8 | 181.80 | 0.00 | 0.00 | 9.6 | 9.75 | 9.71 | 101.10 | IW & OG TAKEN AT TOP OF SECTION 4; BEST PLACE ON CORE. |
| 117-723B-21X | 187.6 | 187.60 | 0.00 | 0.00 | 9.7 | 10.08 | 10.08 | 103.90 | |
| 117-723A-21X | 191.4 | 191.40 | 0.00 | 0.00 | 9.7 | 9.74 | 9.74 | 100.40 | |
| 117-723B-22X | 197.3 | 197.30 | 0.00 | 0.00 | 9.6 | 9.43 | 9.43 | 98.20 | |
| 117-723A-22X | 201.1 | 201.10 | 0.00 | 0.00 | 9.7 | 10.12 | 10.15 | 104.60 | |
| 117-723B-23X | 206.9 | 206.90 | 0.00 | 0.00 | 9.6 | 9.89 | 9.89 | 103.00 | |
| 117-723A-23X | 210.8 | 210.80 | 0.00 | 0.00 | 9.6 | 3.63 | 3.63 | 37.80 | |
| 117-723B-24X | 216.5 | 216.50 | 0.00 | 0.00 | 9.7 | 10.59 | 10.59 | 109.20 | |
| 117-723A-24X | 220.4 | 220.40 | 0.00 | 0.00 | 9.7 | 10.06 | 10.12 | 104.30 | (DB)69CM IN CL&LL AND 6CM TO PALEO DELETED FROM CC;DELETED CC(Y) |
| 117-723B-25X | 226.2 | 226.20 | 0.00 | 0.00 | 9.7 | 10.13 | 10.13 | 104.40 | |
| 117-723A-25X | 230.1 | 230.10 | 0.00 | 0.00 | 9.7 | 9.57 | 9.57 | 98.70 | |
| 117-723B-26X | 235.9 | 235.90 | 0.00 | 0.00 | 9.7 | 9.47 | 9.47 | 97.60 | |
| 117-723A-26X | 239.8 | 239.80 | 0.00 | 0.00 | 9.6 | 6.53 | 6.53 | 68.00 | VOIDS THROUGHOUT |
| 117-723B-27X | 245.6 | 245.60 | 0.00 | 0.00 | 1.6 | 1.92 | 1.88 | 117.50 | |
| 117-723B-28X | 247.2 | 0.00 | 0.00 | 7.8 | (DB) NO RECOVERY | ||||
| 117-723A-27X | 249.4 | 249.40 | 0.00 | 0.00 | 9.7 | 8.60 | 8.54 | 88.00 | VOIDS THROUGHOUT |
| 117-723B-29X | 255.0 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723A-28X | 259.1 | 259.10 | 0.00 | 0.00 | 9.6 | 3.90 | 3.84 | 40.00 | |
| 117-723B-30X | 264.7 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723A-29X | 268.7 | 268.70 | 0.00 | 0.00 | 9.6 | 10.07 | 10.07 | 104.90 | VOIDS THROUGHOUT |
| 117-723A-30X | 278.3 | 278.30 | 0.00 | 0.00 | 9.6 | 7.67 | 7.61 | 79.30 | |
| 117-723A-31X | 287.9 | 287.90 | 0.00 | 0.00 | 9.6 | 10.18 | 10.18 | 106.00 | VOIDS THROUGHOUT |
| 117-723B-31X | 293.7 | 293.70 | 0.00 | 0.00 | 9.6 | 9.54 | 9.54 | 99.40 | DRILL INTERVAL W/CENTER PUNCH, 274.0-293.7. NO CORE TAKEN |
| 117-723A-32X | 297.5 | 297.50 | 0.00 | 0.00 | 9.6 | 9.83 | 9.83 | 102.40 | |
| 117-723B-32X | 303.3 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723A-33X | 307.1 | 307.10 | 0.00 | 0.00 | 9.6 | 10.10 | 10.10 | 105.20 | |
| 117-723B-33X | 313.0 | 313.00 | 0.00 | 0.00 | 4.4 | 4.17 | 4.17 | 94.80 | |
| 117-723A-34X | 316.7 | 316.70 | 0.00 | 0.00 | 4.8 | 0.54 | 0.48 | 10.00 | |
| 117-723B-34X | 317.4 | 0.00 | 0.00 | 5.3 | (DB) NO RECOVERY | ||||
| 117-723A-35X | 321.5 | 321.50 | 0.00 | 0.00 | 4.8 | 6.03 | 5.93 | 123.50 | |
| 117-723B-35X | 322.7 | 322.70 | 0.00 | 0.00 | 9.8 | 3.33 | 3.33 | 34.00 | |
| 117-723A-36X | 326.3 | 326.30 | 0.00 | 0.00 | 9.5 | 11.28 | 11.28 | 118.70 | |
| 117-723B-36X | 332.5 | 332.50 | 0.00 | 0.00 | 9.7 | 1.59 | 1.59 | 16.40 | |
| 117-723A-37X | 335.8 | 335.80 | 0.00 | 0.00 | 9.6 | 1.57 | 1.57 | 16.40 | |
| 117-723B-37X | 342.2 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723A-38X | 345.4 | 0.00 | 0.00 | 9.6 | (DB) NO RECOVERY | ||||
| 117-723B-38X | 351.9 | 351.90 | 0.00 | 0.00 | 9.7 | 3.31 | 3.31 | 34.10 | |
| 117-723A-39X | 355.0 | 355.00 | 0.00 | 0.00 | 9.7 | 9.58 | 9.58 | 98.80 | (DB) SECT.5 VOID 22-31, 104-120 CM |
| 117-723B-39X | 361.6 | 361.60 | 0.00 | 0.00 | 9.7 | 9.60 | 9.60 | 99.00 | |
| 117-723A-40X | 364.7 | 364.70 | 0.00 | 0.00 | 9.6 | 9.86 | 9.86 | 102.70 | |
| 117-723B-40X | 371.3 | 371.30 | 0.00 | 0.00 | 9.7 | 5.62 | 5.57 | 57.40 | |
| 117-723A-41X | 374.3 | 374.30 | 0.00 | 0.00 | 9.7 | 9.15 | 9.15 | 94.30 | |
| 117-723B-41X | 381.0 | 381.00 | 0.00 | 0.00 | 9.7 | 6.71 | 6.71 | 69.20 | |
| 117-723A-42X | 384.0 | 384.00 | 0.00 | 0.00 | 9.6 | 1.94 | 1.94 | 20.20 | |
| 117-723A-43X | 393.6 | 0.00 | 0.00 | 9.7 | (DB) NO RECOVERY | ||||
| 117-723B-42X | 400.3 | 400.30 | 0.00 | 0.00 | 9.5 | 5.01 | 5.01 | 52.70 | DRILLED INTERVAL W/CENTER PUNCH, 390.7-400.3 M. NO CORE TAKEN |
| 117-723A-44X | 403.3 | 403.30 | 0.00 | 0.00 | 9.7 | 0.05 | 0.05 | 0.50 | |
| 117-723B-43X | 409.8 | 0.00 | 0.00 | 9.6 | (DB) NO RECOVERY | ||||
| 117-723A-45X | 413.0 | 413.00 | 0.00 | 0.00 | 9.6 | 0.28 | 0.28 | 2.90 | |
| 117-723B-44X | 419.4 | 419.40 | 0.00 | 0.00 | 9.6 | 0.22 | 0.22 | 2.30 | |
| 117-723A-46X | 422.6 | 0.00 | 0.00 | 9.7 | NO RECOVERY |