Not logged in
PANGAEA.
Data Publisher for Earth & Environmental Science

Kennett, James P; van den Borch, C C (2005): Paleomagnetic measurements with a long-core spinner magnetometer of Hole 90-588B. PANGAEA, https://doi.org/10.1594/PANGAEA.262870

Always quote citation above when using data! You can download the citation in several formats below.

RIS CitationBibTeX CitationShow MapGoogle Earth

Related to:
DSDP (1989): Data from the Deep Sea Drilling Project. Sediment, hard rock and reference files. National Geophysical Data Center, National Environmental Satellite, Data and Information Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce, 1, CD-ROM
Takeuchi, Akira; Stein, Ruediger; Srinivasan, M S; Robert, Christian; Nelson, Campbell S; Morin, Roger H; Merrill, Russell B; Martini, Erlend; Lohman, William H; Jenkins, D Graham; Gardner, James V; Dudley, Walter C; Caulet, Jean-Pierre; Boersma, Anne; Barton, Charles E; Baker, Paul A; Kennett, James P; von der Borch, Christopher C (1986): Initial Reports of the Deep Sea Drilling Project. Initial Reports of the Deep Sea Drilling Project, U.S. Government Printing Office, XC, 744 pp + 1517 pp, https://doi.org/10.2973/dsdp.proc.90.1986
Project(s):
Coverage:
Latitude: -26.111700 * Longitude: 161.226700
Date/Time Start: 1982-12-06T00:00:00 * Date/Time End: 1982-12-06T00:00:00
Minimum DEPTH, sediment/rock: 1.50 m * Maximum DEPTH, sediment/rock: 241.60 m
Event(s):
90-588B * Latitude: -26.111700 * Longitude: 161.226700 * Date/Time: 1982-12-06T00:00:00 * Elevation: -1533.0 m * Penetration: 277.4 m * Recovery: 255.4 m * Location: South Pacific/Tasman Sea/CONT RISE * Campaign: Leg90 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 31 cores; 277.2 m cored; 0 m drilled; 92.1 % recovery
Parameter(s):
#NameShort NameUnitPrincipal InvestigatorMethod/DeviceComment
DEPTH, sediment/rockDepth sedmGeocode
Sample code/labelSample labelDSDPDSDP/ODP/IODP sample designation
CommentCommentDSDP
Size:
106 data points

Data

Download dataset as tab-delimited text — use the following character encoding:


Depth sed [m]

Sample label

Comment
1.5090-588B-1-2,0DIRTY,AIR POCKETS
3.0090-588B-1-3,0
4.5090-588B-1-4,0ACCURACY REPRODUCIBLE
7.8090-588B-2-1,0
9.3090-588B-2-2,0
10.8090-588B-2-3,0
12.3090-588B-2-4,0SLOPPY GAP IN MIDDLE
13.8090-588B-2-5,0
15.3090-588B-2-6,0H2O IN AIR PCKT.G RESULTS
17.4090-588B-3-1,0H2O IN AIR PCKT.GOOD RES.
18.9090-588B-3-2,0H2O IN AIR PCKT.GOOD RES.
20.4090-588B-3-3,0
21.9090-588B-3-4,0
23.4090-588B-3-5,0
24.9090-588B-3-6,0EVERY 20 CM
27.0090-588B-4-1,0EVERY 10 CM
28.5090-588B-4-2,0
30.0090-588B-4-3,0
31.5090-588B-4-4,0
33.0090-588B-4-5,0
34.5090-588B-4-6,0
38.1090-588B-5-2,0
39.6090-588B-5-3,0
41.1090-588B-5-4,0
42.6090-588B-5-5,0
44.1090-588B-5-6,0
47.7090-588B-6-2,0
49.2090-588B-6-3,0
50.7090-588B-6-4,0
55.8090-588B-7-1,0
57.3090-588B-7-2,0
58.8090-588B-7-3,0
60.3090-588B-7-4,0
61.8090-588B-7-5,0REPRODUCIBILITY POOR
63.3090-588B-7-6,0REPRODUCIBILITY POOR
66.9090-588B-8-2,0TAPE PUNCH OFF
68.4090-588B-8-3,0TAPE PUNCH OFF
69.9090-588B-8-4,0
71.4090-588B-8-5,0
72.9090-588B-8-6,0
75.0090-588B-9-1,0´TOP 75 ´´VOID´´ ´
76.5090-588B-9-2,0
78.0090-588B-9-3,0
79.5090-588B-9-4,0
81.0090-588B-9-5,0
82.5090-588B-9-6,0BADLY SCARRED
180.6090-588B-20-1,0
182.1090-588B-20-2,0
183.6090-588B-20-3,0
185.1090-588B-20-4,0A FEW RUST SPOTS
186.6090-588B-20-5,0
188.1090-588B-20-6,0AT 20 CM INTERVALS
190.2090-588B-21-1,010 CM INTERVALS
191.7090-588B-21-2,010 + 20 CM INTERVALS
193.2090-588B-21-3,020 CM INTERVALS
194.7090-588B-21-4,0
196.2090-588B-21-5,0
197.7090-588B-21-6,0
199.8090-588B-22-1,0
201.3090-588B-22-2,0
204.3090-588B-22-4,0
205.8090-588B-22-5,0
207.3090-588B-22-6,0
209.4090-588B-23-1,0
210.9090-588B-23-2,0
212.4090-588B-23-3,0
213.9090-588B-23-4,0
215.4090-588B-23-5,0
216.9090-588B-23-6,0
219.0090-588B-24-1,0
220.5090-588B-24-2,0
222.0090-588B-24-3,0
223.5090-588B-24-4,0
225.0090-588B-24-5,0
228.6090-588B-25-1,05-M HPC NOW
230.1090-588B-25-2,0
231.6090-588B-25-3,0
233.6090-588B-26-1,0EMBEDDED STEEL PART.
235.1090-588B-26-2,0FEWER STEEL PART.
236.6090-588B-26-3,0
240.1090-588B-27-2,0BADLY SCARRED & DIRTY
241.6090-588B-27-3,0BADLY SCARRED & DIRTY