Suess, Erwin; von Huene, Roland; Shipboard Scientific Party (2005): Moisture and density measured on ODP Hole 112-681A [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.258175
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
ODP/TAMU (2005): JANUS Database. Ocean Drilling Program, Texas A&M University, College Station TX 77845-9547, USA; (data copied from Janus 2005-02 to 2005-06), http://www-odp.tamu.edu/database/
Suess, Erwin; von Huene, Roland; et al. (1988): Proceedings of the Ocean Drilling Program, 112 Initial Reports. Proceedings of the Ocean Drilling Program, Ocean Drilling Program, 112, 1015 pp, https://doi.org/10.2973/odp.proc.ir.112.1988
Further details:
Blum, Peter (1997): Moisture and density (by mass and volume). Physical properties handbook: a guide to the shipboard measurement of physical properties of deep-sea cores, hdl:10013/epic.40058.d002
Project(s):
Ocean Drilling Program (ODP)
Coverage:
Latitude: -10.976660 * Longitude: -77.957670
Date/Time Start: 1986-11-07T01:15:00 * Date/Time End: 1986-11-08T00:00:00
Minimum DEPTH, sediment/rock: 3.670 m * Maximum DEPTH, sediment/rock: 113.210 m
Event(s):
112-681A * Latitude: -10.976660 * Longitude: -77.957670 * Date/Time Start: 1986-11-07T01:15:00 * Date/Time End: 1986-11-08T00:00:00 * Elevation: -161.0 m * Penetration: 187 m * Recovery: 112.4 m * Location: South Pacific Ocean * Campaign: Leg112 * Basis: Joides Resolution * Method/Device: Drilling/drill rig (DRILL) * Comment: 20 cores; 187 m cored; 0 m drilled; 60.1 % recovery
Comment:
Method A: wet-bulk volume measured with special volume sampler; method B: wet-bulk volume measured by gas pycnometry; method C: dry volume measured by gas pycnometry
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Depth, composite | Depth comp | mcd | Shipboard Scientific Party | ||
3 | Sample code/label | Sample label | Shipboard Scientific Party | DSDP/ODP/IODP sample designation | ||
4 | Water content, wet mass | Water wm | % | Shipboard Scientific Party | ||
5 | Water content, dry mass | Water dm | % | Shipboard Scientific Party | ||
6 | Density, wet bulk | WBD | g/cm3 | Shipboard Scientific Party | ||
7 | Density, dry bulk | DBD | g/cm3 | Shipboard Scientific Party | ||
8 | Density, grain | Density grain | g/cm3 | Shipboard Scientific Party | ||
9 | Porosity | Poros | % vol | Shipboard Scientific Party | ||
10 | Void Ratio description | Void Ratio | Shipboard Scientific Party | |||
11 | Method comment | Method comm | Shipboard Scientific Party |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
200 data points
Data
1 Depth sed [m] | 2 Depth comp [mcd] | 3 Sample label | 4 Water wm [%] | 5 Water dm [%] | 6 WBD [g/cm3] | 7 DBD [g/cm3] | 8 Density grain [g/cm3] | 9 Poros [% vol] | 10 Void Ratio | 11 Method comm |
---|---|---|---|---|---|---|---|---|---|---|
3.670 | 3.670 | 112-681A-1H-3,67-70 | 64.8 | 183.8 | 1.297 | 0.457 | 2.540 | 82.0 | 4.560 | B |
3.670 | 3.670 | 112-681A-1H-3,67-70 | 64.8 | 183.8 | 1.285 | 0.453 | 2.421 | 81.3 | 4.347 | C |
10.280 | 10.280 | 112-681A-2H-3,78-81 | 60.2 | 151.0 | 1.380 | 0.550 | 2.901 | 81.1 | 4.279 | B |
10.280 | 10.280 | 112-681A-2H-3,78-81 | 60.2 | 151.0 | 1.365 | 0.544 | 2.741 | 80.2 | 4.044 | C |
21.270 | 21.270 | 112-681A-3H-4,77-80 | 56.5 | 130.1 | 1.362 | 0.592 | 2.390 | 75.2 | 3.036 | B |
21.270 | 21.270 | 112-681A-3H-4,77-80 | 56.5 | 130.1 | 1.352 | 0.587 | 2.315 | 74.6 | 2.940 | C |
32.150 | 32.150 | 112-681A-4H-5,65-68 | 64.6 | 182.7 | 1.275 | 0.451 | 2.308 | 80.5 | 4.118 | B |
32.150 | 32.150 | 112-681A-4H-5,65-68 | 64.6 | 182.7 | 1.268 | 0.449 | 2.248 | 80.0 | 4.010 | C |
39.950 | 39.950 | 112-681A-5H-4,45-48 | 50.0 | 100.0 | 1.466 | 0.733 | 2.582 | 71.6 | 2.521 | B |
39.950 | 39.950 | 112-681A-5H-4,45-48 | 50.0 | 100.0 | 1.461 | 0.731 | 2.550 | 71.3 | 2.490 | C |
68.690 | 68.690 | 112-681A-8H-4,69-72 | 40.7 | 68.7 | 1.648 | 0.977 | 2.834 | 65.5 | 1.902 | B |
68.690 | 68.690 | 112-681A-8H-4,69-72 | 40.7 | 68.7 | 1.612 | 0.955 | 2.664 | 64.1 | 1.788 | C |
79.750 | 79.750 | 112-681A-9H-5,75-78 | 58.3 | 140.1 | 1.402 | 0.584 | 2.905 | 79.9 | 3.973 | B |
79.750 | 79.750 | 112-681A-9H-5,75-78 | 58.3 | 140.1 | 1.340 | 0.558 | 2.359 | 76.3 | 3.227 | C |
94.180 | 94.180 | 112-681A-11H-2,68-71 | 35.2 | 54.4 | 1.770 | 1.147 | 2.932 | 60.9 | 1.557 | B, Cut by saw |
94.180 | 94.180 | 112-681A-11H-2,68-71 | 35.2 | 54.4 | 1.724 | 1.117 | 2.744 | 59.3 | 1.456 | C, Cut by saw |
109.820 | 109.820 | 112-681A-12H-6,82-85 | 52.2 | 109.3 | 1.424 | 0.681 | 2.487 | 72.6 | 2.654 | B, Cut by saw |
109.820 | 109.820 | 112-681A-12H-6,82-85 | 52.2 | 109.3 | 1.387 | 0.663 | 2.265 | 70.7 | 2.418 | C, Cut by saw |
113.210 | 113.210 | 112-681A-13X-2,71-74 | 60.8 | 155.1 | 1.336 | 0.524 | 2.533 | 79.3 | 3.838 | B, Cut by saw |
113.210 | 113.210 | 112-681A-13X-2,71-74 | 60.8 | 155.1 | 1.297 | 0.509 | 2.215 | 77.0 | 3.356 | C, Cut by saw |