Barton, Charles E; Bloemendal, Jan (1986): (Table 3) Paleomagnetic of DSDP Hole 90-590. PANGAEA, https://doi.org/10.1594/PANGAEA.258036, In supplement to: Barton, CE; Bloemendal, J (1986): Paleomagnetism of sediments collected during Leg 90, Southwest Pacific. In: Kennett, JP; von der Borch, CC; et al. (eds.), Initial Reports of the Deep Sea Drilling Project, Washington (U.S. Govt. Printing Office), 90, 1273-1316, https://doi.org/10.2973/dsdp.proc.90.136.1986
Always quote citation above when using data! You can download the citation in several formats below.
Further details:
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -31.167000 * Longitude: 163.358500
Date/Time Start: 1982-12-15T00:00:00 * Date/Time End: 1982-12-15T00:00:00
Minimum DEPTH, sediment/rock: 0.75 m * Maximum DEPTH, sediment/rock: 25.85 m
Event(s):
90-590 * Latitude: -31.167000 * Longitude: 163.358500 * Date/Time: 1982-12-15T00:00:00 * Elevation: -1299.0 m * Penetration: 26.2 m * Recovery: 26.4 m * Location: South Pacific/Tasman Sea/CONT RISE * Campaign: Leg90 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 3 cores; 26.2 m cored; 0 m drilled; 100.6 % recovery
Comment:
Demag step 200 (mT)
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | Barton, Charles E | DSDP/ODP/IODP sample designation | ||
3 | NRM, Declination after demagnetization | Decl (AF) | deg | Barton, Charles E | ||
4 | NRM, Inclination after demagnetization | Incl (AF) | deg | Barton, Charles E | ||
5 | NRM, Intensity after demagnetization | Inten (AF) | mA/m | Barton, Charles E |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
184 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Decl (AF) [deg] | 4 Incl (AF) [deg] | 5 Inten (AF) [mA/m] |
---|---|---|---|---|
0.75 | 90-590-1H-1,75 | 339.4 | -17.1 | 0.231 |
1.25 | 90-590-1H-1,125 | 3.2 | -74.0 | 0.596 |
1.75 | 90-590-1H-2,25 | 42.8 | -76.8 | 0.402 |
2.25 | 90-590-1H-2,75 | 280.2 | -52.3 | 0.161 |
2.75 | 90-590-1H-2,125 | 341.1 | -66.8 | 0.806 |
3.25 | 90-590-1H-3,25 | 328.7 | -50.2 | 3.500 |
3.75 | 90-590-1H-3,75 | 266.7 | -59.5 | 0.191 |
4.25 | 90-590-1H-3,125 | 276.6 | -51.5 | 0.046 |
4.75 | 90-590-1H-4,25 | 263.4 | -53.9 | 1.460 |
5.25 | 90-590-1H-4,75 | 268.8 | -29.5 | 0.400 |
5.75 | 90-590-1H-4,125 | 246.6 | -71.9 | 2.490 |
6.25 | 90-590-1H-5,25 | 317.3 | -54.5 | 2.290 |
6.75 | 90-590-1H-5,75 | 332.7 | -65.9 | 0.107 |
8.30 | 90-590-2H-1,130 | 23.2 | -55.0 | 0.076 |
8.75 | 90-590-2H-2,25 | 194.8 | -57.1 | 0.090 |
9.25 | 90-590-2H-2,75 | 198.5 | -56.8 | 0.095 |
9.75 | 90-590-2H-2,125 | 319.5 | -57.2 | 0.090 |
10.25 | 90-590-2H-3,25 | 260.6 | -52.8 | 0.124 |
10.75 | 90-590-2H-3,75 | 273.9 | -63.0 | 0.195 |
11.25 | 90-590-2H-3,125 | 58.6 | 52.1 | 0.045 |
11.75 | 90-590-2H-4,25 | 94.2 | 51.8 | 0.062 |
12.25 | 90-590-2H-4,75 | 48.1 | -19.8 | 0.025 |
12.75 | 90-590-2H-4,125 | 71.8 | -4.8 | 0.072 |
13.25 | 90-590-2H-5,25 | 345.0 | 45.7 | 0.090 |
13.75 | 90-590-2H-5,75 | 263.4 | 21.6 | 0.092 |
14.25 | 90-590-2H-5,125 | 289.3 | -2.0 | 0.106 |
14.75 | 90-590-2H-6,25 | 197.3 | 72.1 | 0.064 |
15.25 | 90-590-2H-6,75 | 132.0 | 43.0 | 0.069 |
15.75 | 90-590-2H-6,125 | 140.4 | 4.3 | 0.061 |
16.25 | 90-590-2H-7,25 | 193.2 | 0.3 | 1.310 |
16.90 | 90-590-3H-1,30 | 338.6 | -63.8 | 0.110 |
17.35 | 90-590-3H-1,75 | 268.8 | -48.0 | 0.055 |
17.85 | 90-590-3H-1,125 | 320.0 | -21.0 | 0.123 |
18.35 | 90-590-3H-2,25 | 258.4 | -83.9 | 0.083 |
18.85 | 90-590-3H-2,75 | 325.3 | -24.5 | 0.099 |
19.35 | 90-590-3H-2,125 | 348.2 | -29.0 | 0.050 |
19.85 | 90-590-3H-3,25 | 298.2 | -42.0 | 0.108 |
20.35 | 90-590-3H-3,75 | 243.7 | -72.6 | 0.055 |
20.80 | 90-590-3H-3,120 | 303.6 | 29.0 | 0.061 |
21.35 | 90-590-3H-4,25 | 326.7 | -33.4 | 0.072 |
21.85 | 90-590-3H-4,75 | 339.2 | 10.7 | 0.029 |
22.35 | 90-590-3H-4,125 | 126.3 | 0.2 | 0.231 |
22.85 | 90-590-3H-5,25 | 28.6 | 61.2 | 0.032 |
23.35 | 90-590-3H-5,75 | 6.8 | -62.3 | 0.057 |
23.75 | 90-590-3H-5,115 | 343.1 | -36.2 | 0.067 |
25.85 | 90-590-3H-7,25 | 62.4 | 17.6 | 0.086 |