Langseth, Marcus G; von Huene, Roland; Nasu, Noriyuki (2005): Shear strength of Hole 57-440A [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.230138
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
DSDP (1989): Data from the Deep Sea Drilling Project. Sediment, hard rock and reference files. National Geophysical Data Center, National Environmental Satellite, Data and Information Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce, 1, CD-ROM
Shaffer, Bernard L; Sato, Shunji; Reynolds, Richard A; Moore, George W; Keller, Gerta; Honza, Eiichi; Fujioka, Kantaro; Carson, Bobb; Cadet, Jean-Paul; Bell, Gary D; Barron, John A; Arthur, Michael A; von Huene, Roland; Nasu, Noriyuki (1980): Initial Reports of the Deep Sea Drilling Project. U. S. Government Printing Office, LVII, 835 pp + 787 pp, https://doi.org/10.2973/dsdp.proc.5657.1980
Further details:
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 39.735500 * Longitude: 143.929000
Date/Time Start: 1977-11-10T00:00:00 * Date/Time End: 1977-11-10T00:00:00
Minimum DEPTH, sediment/rock: 83.56 m * Maximum DEPTH, sediment/rock: 136.43 m
Event(s):
57-440A * Latitude: 39.735500 * Longitude: 143.929000 * Date/Time: 1977-11-10T00:00:00 * Elevation: -4509.0 m * Penetration: 139.5 m * Recovery: 33.4 m * Location: North Pacific/TRENCH * Campaign: Leg57 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 6 cores; 57 m cored; 9.5 m drilled; 58.6 % recovery
Parameter(s):
| # | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
|---|---|---|---|---|---|---|
| 1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
| 2 | Sample code/label | Sample label | DSDP | DSDP/ODP/IODP sample designation | ||
| 3 | Shear strength, primary | Shear str | kPa | DSDP | ||
| 4 | Comment | Comment | DSDP | Data type/Torvane capacity |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
84 data points
Data
| 1 Depth sed [m] | 2 Sample label | 3 Shear str [kPa] | 4 Comment |
|---|---|---|---|
| 83.56 | 57-440A-2-1,106 | 56.50 | Torvane/Middle |
| 84.24 | 57-440A-2-2,24 | 54.60 | Torvane/Middle |
| 86.53 | 57-440A-2-3,103 | 54.60 | Torvane/Middle |
| 87.75 | 57-440A-2-4,75 | 50.80 | Torvane/Middle |
| 87.98 | 57-440A-2-4,98 | 54.90 | Remolded |
| 87.98 | 57-440A-2-4,98 | 54.90 | Shear |
| 89.41 | 57-440A-2-5,91 | 56.50 | Torvane/Middle |
| 90.43 | 57-440A-2-6,43 | 67.00 | Torvane/Middle |
| 92.60 | 57-440A-3-1,60 | 26.80 | Torvane/Middle |
| 94.14 | 57-440A-3-2,64 | 73.40 | Remolded |
| 94.14 | 57-440A-3-2,64 | 73.40 | Shear |
| 94.24 | 57-440A-3-2,74 | 58.40 | Torvane/Middle |
| 95.60 | 57-440A-3-3,60 | 107.30 | Torvane/Middle |
| 102.41 | 57-440A-4-1,91 | 50.80 | Torvane/Middle |
| 102.45 | 57-440A-4-1,95 | 34.10 | Shear |
| 103.45 | 57-440A-4-2,45 | 53.60 | Torvane/Middle |
| 114.97 | 57-440A-5-3,97 | 107.30 | Torvane/Middle |
| 115.02 | 57-440A-5-3,102 | 74.90 | Remolded |
| 115.02 | 57-440A-5-3,102 | 74.90 | Shear |
| 116.22 | 57-440A-5-4,72 | 116.80 | Torvane/Middle |
| 118.12 | 57-440A-5-5,112 | 82.40 | Torvane/Middle |
| 118.60 | 57-440A-5-6,10 | 86.20 | Torvane/Middle |
| 123.10 | 57-440A-6-2,110 | 18.20 | Torvane/Middle |
| 123.35 | 57-440A-6-2,135 | 49.00 | Shear |
| 130.58 | 57-440A-7-1,58 | 60.30 | Torvane/Middle |
| 130.62 | 57-440A-7-1,62 | 67.50 | Shear |
| 133.99 | 57-440A-7-3,99 | 23.00 | Torvane/Middle |
| 136.43 | 57-440A-7-5,43 | 65.10 | Torvane/Middle |