Tracey, J I J; Sutton, George H (2004): Grain size analysis of Hole 8-74. PANGAEA, https://doi.org/10.1594/PANGAEA.222483
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Beckmann, Jean-Pierre; Haq, Bilal U; Lipps, J; Moore, Ted; von der Borch, Christopher C; Galehouse, J S; Nesteroff, Wladimir D; Sutton, George H; Tracey, J I J (1971): Initial Reports of the Deep Sea Drilling Project. Initial Reports of the Deep Sea Drilling Project, U.S. Government Printing Office, VIII, 1037 pp, https://doi.org/10.2973/dsdp.proc.8.1971
Further details:
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -6.236700 * Longitude: -136.096700
Date/Time Start: 1969-11-21T00:00:00 * Date/Time End: 1969-11-21T00:00:00
Minimum DEPTH, sediment/rock: 0.60 m * Maximum DEPTH, sediment/rock: 80.70 m
Event(s):
8-74 * Latitude: -6.236700 * Longitude: -136.096700 * Date/Time: 1969-11-21T00:00:00 * Elevation: -4431.0 m * Penetration: 102 m * Recovery: 65.7 m * Location: South Pacific/BASIN * Campaign: Leg8 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 11 cores; 92 m cored; 0 m drilled; 71.4 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
210 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
0.60 | 8-74-1-1,60 | 0.00 | 3.7 | 39.0 | 57.3 |
1.70 | 8-74-1-2,20 | 0.00 | 10.7 | 32.2 | 57.1 |
3.20 | 8-74-1-3,20 | 0.00 | 0.8 | 36.8 | 62.4 |
4.70 | 8-74-1-4,20 | 0.00 | 1.5 | 33.3 | 65.2 |
6.20 | 8-74-1-5,20 | 0.00 | 3.2 | 36.0 | 60.8 |
7.70 | 8-74-1-6,20 | 0.00 | 1.4 | 36.1 | 62.5 |
9.65 | 8-74-2-1,65 | 9.00 | 1.0 | 35.1 | 63.9 |
10.70 | 8-74-2-2,20 | 9.00 | 2.3 | 45.6 | 52.1 |
12.20 | 8-74-2-3,20 | 9.00 | 1.0 | 47.7 | 51.3 |
18.75 | 8-74-3-1,75 | 18.00 | 2.5 | 50.4 | 47.1 |
19.70 | 8-74-3-2,20 | 18.00 | 1.2 | 44.1 | 54.7 |
21.20 | 8-74-3-3,20 | 18.00 | 5.7 | 48.6 | 45.6 |
22.70 | 8-74-3-4,20 | 18.00 | 1.4 | 51.4 | 47.2 |
24.20 | 8-74-3-5,20 | 18.00 | 1.8 | 48.6 | 49.6 |
27.30 | 8-74-4-1,30 | 27.00 | 6.7 | 53.3 | 40.0 |
28.70 | 8-74-4-2,20 | 27.00 | 0.5 | 51.7 | 47.8 |
30.20 | 8-74-4-3,20 | 27.00 | 0.2 | 46.6 | 53.2 |
31.70 | 8-74-4-4,20 | 27.00 | 0.4 | 40.7 | 58.9 |
33.20 | 8-74-4-5,20 | 27.00 | 0.4 | 51.9 | 47.7 |
36.40 | 8-74-5-1,40 | 36.00 | 1.0 | 48.5 | 50.5 |
37.70 | 8-74-5-2,20 | 36.00 | 2.0 | 44.7 | 53.3 |
39.20 | 8-74-5-3,20 | 36.00 | 0.5 | 50.7 | 48.8 |
40.70 | 8-74-5-4,20 | 36.00 | 2.9 | 50.6 | 46.5 |
42.20 | 8-74-5-5,20 | 36.00 | 1.7 | 50.5 | 47.8 |
46.20 | 8-74-6-1,20 | 46.00 | 0.9 | 46.1 | 53.0 |
47.70 | 8-74-6-2,20 | 46.00 | 0.4 | 43.5 | 56.1 |
49.20 | 8-74-6-3,20 | 46.00 | 0.2 | 48.5 | 51.3 |
49.70 | 8-74-6-3,70 | 46.00 | 0.4 | 48.1 | 51.5 |
50.70 | 8-74-6-4,20 | 46.00 | 0.8 | 44.8 | 54.4 |
52.20 | 8-74-6-5,20 | 46.00 | 0.6 | 47.2 | 52.2 |
53.70 | 8-74-6-6,20 | 46.00 | 0.2 | 45.4 | 54.4 |
56.70 | 8-74-7-2,20 | 55.00 | 0.4 | 47.2 | 52.4 |
58.20 | 8-74-7-3,20 | 55.00 | 0.2 | 48.6 | 51.2 |
59.70 | 8-74-7-4,20 | 55.00 | 0.2 | 44.0 | 55.8 |
61.20 | 8-74-7-5,20 | 55.00 | 0.3 | 48.8 | 50.9 |
65.70 | 8-74-8-2,20 | 64.00 | 0.2 | 39.1 | 60.7 |
67.20 | 8-74-8-3,20 | 64.00 | 0.1 | 31.5 | 68.4 |
74.70 | 8-74-9-2,20 | 73.00 | 0.2 | 41.1 | 58.7 |
76.20 | 8-74-9-3,20 | 73.00 | 0.2 | 46.5 | 53.3 |
77.70 | 8-74-9-4,20 | 73.00 | 0.1 | 45.1 | 54.8 |
79.20 | 8-74-9-5,20 | 73.00 | 0.4 | 35.8 | 63.8 |
80.70 | 8-74-9-6,20 | 73.00 | 0.6 | 41.4 | 58.0 |