Tracey, J I J; Sutton, George H (2004): Grain size analysis of Hole 8-72A [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.222481
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Beckmann, Jean-Pierre; Haq, Bilal U; Lipps, J; Moore, Ted; von der Borch, Christopher C; Galehouse, J S; Nesteroff, Wladimir D; Sutton, George H; Tracey, J I J (1971): Initial Reports of the Deep Sea Drilling Project. Initial Reports of the Deep Sea Drilling Project, U.S. Government Printing Office, VIII, 1037 pp, https://doi.org/10.2973/dsdp.proc.8.1971
Further details:
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 0.441500 * Longitude: -138.867000
Date/Time Start: 1969-11-12T00:00:00 * Date/Time End: 1969-11-12T00:00:00
Minimum DEPTH, sediment/rock: 10.32 m * Maximum DEPTH, sediment/rock: 61.75 m
Event(s):
8-72A * Latitude: 0.441500 * Longitude: -138.867000 * Date/Time: 1969-11-12T00:00:00 * Elevation: -4326.0 m * Penetration: 63 m * Recovery: 47 m * Location: North Pacific/PLAIN * Campaign: Leg8 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 6 cores; 54 m cored; 0 m drilled; 87 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
145 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
10.32 | 8-72A-1-1,132 | 9.00 | 12.2 | 18.4 | 69.4 |
10.55 | 8-72A-1-2,5 | 9.00 | 8.8 | 21.1 | 70.1 |
12.10 | 8-72A-1-3,10 | 9.00 | 11.6 | 28.3 | 60.1 |
13.52 | 8-72A-1-4,2 | 9.00 | 17.7 | 19.0 | 63.3 |
18.05 | 8-72A-2-1,5 | 18.00 | 5.1 | 18.1 | 76.8 |
19.55 | 8-72A-2-2,5 | 18.00 | 10.3 | 23.4 | 66.3 |
21.15 | 8-72A-2-3,15 | 18.00 | 6.0 | 21.7 | 72.3 |
22.62 | 8-72A-2-4,12 | 18.00 | 2.6 | 18.8 | 78.6 |
24.15 | 8-72A-2-5,15 | 18.00 | 8.5 | 24.3 | 67.2 |
28.62 | 8-72A-3-2,12 | 27.00 | 8.1 | 23.1 | 68.8 |
30.07 | 8-72A-3-3,7 | 27.00 | 3.1 | 21.7 | 75.2 |
31.55 | 8-72A-3-4,5 | 27.00 | 8.9 | 21.6 | 69.5 |
33.10 | 8-72A-3-5,10 | 27.00 | 7.4 | 21.3 | 71.3 |
36.35 | 8-72A-4-1,35 | 36.00 | 7.7 | 53.0 | 39.3 |
37.52 | 8-72A-4-2,2 | 36.00 | 5.9 | 20.5 | 73.6 |
39.10 | 8-72A-4-3,10 | 36.00 | 7.2 | 21.6 | 71.2 |
40.96 | 8-72A-4-4,46 | 36.00 | 6.5 | 21.3 | 72.2 |
44.21 | 8-72A-4-6,71 | 36.00 | 7.7 | 27.9 | 64.4 |
45.60 | 8-72A-5-1,60 | 45.00 | 9.1 | 23.7 | 67.2 |
46.55 | 8-72A-5-2,5 | 45.00 | 9.6 | 20.5 | 69.9 |
48.05 | 8-72A-5-3,5 | 45.00 | 6.9 | 23.1 | 70.0 |
49.55 | 8-72A-5-4,5 | 45.00 | 10.5 | 22.3 | 67.2 |
51.10 | 8-72A-5-5,10 | 45.00 | 3.9 | 24.2 | 71.9 |
52.58 | 8-72A-5-6,8 | 45.00 | 3.2 | 20.6 | 76.2 |
54.05 | 8-72A-6-1,5 | 54.00 | 3.6 | 22.2 | 74.2 |
57.10 | 8-72A-6-3,10 | 54.00 | 2.0 | 27.4 | 70.6 |
58.80 | 8-72A-6-4,30 | 54.00 | 3.5 | 21.6 | 74.9 |
60.10 | 8-72A-6-5,10 | 54.00 | 5.2 | 24.2 | 70.6 |
61.75 | 8-72A-6-6,25 | 54.00 | 1.8 | 24.1 | 74.1 |