Tracey, J I J; Sutton, George H (2004): Grain size analysis of Hole 8-70A [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.222478
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Beckmann, Jean-Pierre; Haq, Bilal U; Lipps, J; Moore, Ted; von der Borch, Christopher C; Galehouse, J S; Nesteroff, Wladimir D; Sutton, George H; Tracey, J I J (1971): Initial Reports of the Deep Sea Drilling Project. Initial Reports of the Deep Sea Drilling Project, U.S. Government Printing Office, VIII, 1037 pp, https://doi.org/10.2973/dsdp.proc.8.1971
Further details:
Grain size data base - background and methods. hdl:10013/epic.32347.d001
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 6.334700 * Longitude: -140.362000
Date/Time Start: 1969-10-23T00:00:00 * Date/Time End: 1969-10-23T00:00:00
Minimum DEPTH, sediment/rock: 114.65 m * Maximum DEPTH, sediment/rock: 249.10 m
Event(s):
8-70A * Latitude: 6.334700 * Longitude: -140.362000 * Date/Time: 1969-10-23T00:00:00 * Elevation: -5059.0 m * Penetration: 331 m * Recovery: 146.4 m * Location: North Pacific/BASIN * Campaign: Leg8 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 30 cores; 218 m cored; 0 m drilled; 67.2 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
60 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
114.65 | 8-70A-1-2,15 | 113.00 | 2.8 | 36.6 | 60.6 |
126.59 | 8-70A-2-4,9 | 122.00 | 3.7 | 51.8 | 44.5 |
158.10 | 8-70A-6-1,10 | 158.00 | 1.8 | 39.4 | 58.8 |
187.60 | 8-70A-9-2,10 | 186.00 | 2.3 | 37.2 | 60.5 |
193.65 | 8-70A-10-2,15 | 192.00 | 3.3 | 43.1 | 53.6 |
195.18 | 8-70A-10-3,18 | 192.00 | 1.8 | 36.0 | 62.2 |
202.60 | 8-70A-11-2,10 | 201.00 | 1.0 | 30.5 | 68.5 |
204.20 | 8-70A-11-3,20 | 201.00 | 1.4 | 29.3 | 69.3 |
205.67 | 8-70A-11-4,17 | 201.00 | 1.5 | 25.3 | 73.2 |
238.96 | 8-70A-15-1,96 | 238.00 | 1.6 | 30.6 | 67.8 |
242.83 | 8-70A-15-4,33 | 238.00 | 1.3 | 26.0 | 72.7 |
249.10 | 8-70A-16-2,60 | 247.00 | 0.5 | 30.4 | 69.1 |