Donelly, Thomas W; Francheteau, Jean; Flower, Martin F J (2004): Grain size analysis of Hole 53-418B [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.222273
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Donnelly, Thomas W; Francheteau, Jean; Bryan, Wilfred B; Robinson, P; Flower, M; Salisbury, Matthew H; et al. (1980): Initial Reports of the Deep Sea Drilling Project, 51/52/53. Initial Reports of the Deep Sea Drilling Project, U.S. Government Printing Office, 51/52/53, 718 pp + 1613 pp, https://doi.org/10.2973/dsdp.proc.515253.1980
Further details:
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 25.034667 * Longitude: -68.057500
Date/Time Start: 1977-04-14T00:00:00 * Date/Time End: 1977-04-14T00:00:00
Minimum DEPTH, sediment/rock: 7.20 m * Maximum DEPTH, sediment/rock: 301.70 m
Event(s):
53-418B * Latitude: 25.034667 * Longitude: -68.057500 * Date/Time: 1977-04-14T00:00:00 * Elevation: -5514.0 m * Penetration: 329.6 m * Recovery: 172.3 m * Campaign: Leg53 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 34 cores; 320.3 m cored; 9.3 m drilled; 53.8 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
170 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
7.20 | 53-418B-2-1,40 | 6.80 | 0.0 | 6.8 | 93.2 |
18.20 | 53-418B-3-2,40 | 16.30 | 0.0 | 4.9 | 95.1 |
21.20 | 53-418B-3-4,40 | 16.30 | 0.2 | 6.2 | 93.6 |
27.80 | 53-418B-4-2,40 | 25.90 | 0.0 | 8.2 | 91.8 |
30.80 | 53-418B-4-4,40 | 25.90 | 0.0 | 6.8 | 93.2 |
37.30 | 53-418B-5-2,40 | 35.40 | 0.0 | 4.9 | 95.1 |
40.30 | 53-418B-5-4,40 | 35.40 | 0.0 | 5.9 | 94.1 |
46.80 | 53-418B-6-2,40 | 44.90 | 0.0 | 5.8 | 94.2 |
49.80 | 53-418B-6-4,40 | 44.90 | 0.0 | 5.2 | 94.8 |
60.80 | 53-418B-7-5,40 | 54.40 | 0.0 | 6.4 | 93.6 |
68.80 | 53-418B-8-4,40 | 63.90 | 0.0 | 7.6 | 92.4 |
75.20 | 53-418B-9-2,40 | 73.30 | 0.0 | 6.6 | 93.4 |
79.70 | 53-418B-9-5,40 | 73.30 | 0.0 | 6.6 | 93.4 |
84.58 | 53-418B-10-2,38 | 82.70 | 1.0 | 6.7 | 92.3 |
94.00 | 53-418B-11-2,40 | 92.10 | 0.0 | 3.4 | 96.6 |
96.90 | 53-418B-11-4,30 | 92.10 | 0.0 | 2.6 | 97.4 |
106.40 | 53-418B-12-4,40 | 101.50 | 3.0 | 5.6 | 91.4 |
111.30 | 53-418B-13-1,40 | 110.90 | 0.0 | 3.4 | 96.6 |
131.50 | 53-418B-15-2,40 | 129.60 | 1.2 | 4.6 | 94.2 |
139.50 | 53-418B-16-1,40 | 139.10 | 0.0 | 3.5 | 96.5 |
150.50 | 53-418B-17-2,40 | 148.60 | 0.0 | 4.7 | 95.3 |
168.10 | 53-418B-19-1,40 | 167.70 | 2.5 | 32.6 | 64.9 |
179.10 | 53-418B-20-2,40 | 177.20 | 0.0 | 8.4 | 91.6 |
187.10 | 53-418B-21-1,40 | 186.70 | 0.0 | 9.4 | 90.6 |
198.90 | 53-418B-22-2,110 | 196.30 | 0.4 | 30.4 | 69.2 |
206.40 | 53-418B-23-1,60 | 205.80 | 0.2 | 8.5 | 91.3 |
215.70 | 53-418B-24-1,40 | 215.30 | 1.1 | 16.9 | 82.0 |
226.80 | 53-418B-25-2,40 | 224.90 | 0.0 | 9.2 | 90.8 |
255.51 | 53-418B-28-2,61 | 253.40 | 0.1 | 37.4 | 62.5 |
264.04 | 53-418B-29-1,114 | 262.90 | 0.0 | 25.0 | 75.0 |
274.30 | 53-418B-30-2,40 | 272.40 | 0.1 | 25.3 | 74.6 |
283.80 | 53-418B-31-2,40 | 281.90 | 7.4 | 42.6 | 50.0 |
292.04 | 53-418B-32-1,64 | 291.40 | 2.6 | 31.6 | 65.8 |
301.70 | 53-418B-33-1,70 | 301.00 | 4.3 | 19.8 | 75.9 |