Benson, William E; Sheridan, Robert E (2004): Grain size analysis of Hole 44-390 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.222220
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Benson, William E; Enos, Paul; Freeman, Tom; Gradstein, Felix M; Murdmaa, Ivar O; Pastouret, L; Schmidt, Ronald R; Sheridan, Robert E; Stuermer, D H; Weaver, Fred M; Worstell, Paula J (1978): Initial Reports of the Deep Sea Drilling Project. U. S. Government Printing Office, XLIV, 1005 pp, https://doi.org/10.2973/dsdp.proc.44.1978
Further details:
Grain size data base - background and methods. hdl:10013/epic.32347.d001
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: 30.142300 * Longitude: -76.112300
Date/Time Start: 1975-08-29T00:00:00 * Date/Time End: 1975-08-29T00:00:00
Minimum DEPTH, sediment/rock: 2.37 m * Maximum DEPTH, sediment/rock: 154.53 m
Event(s):
44-390 * Latitude: 30.142300 * Longitude: -76.112300 * Date/Time: 1975-08-29T00:00:00 * Elevation: -2665.0 m * Penetration: 206 m * Recovery: 27.1 m * Location: North Atlantic Ocean * Campaign: Leg44 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 9 cores; 82.5 m cored; 9.5 m drilled; 32.9 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
45 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
2.37 | 44-390-1-2,87 | 0.00 | 4.0 | 62.0 | 34.0 |
3.33 | 44-390-1-3,33 | 0.00 | 2.8 | 59.5 | 37.7 |
5.27 | 44-390-1-4,77 | 0.00 | 2.5 | 63.5 | 34.0 |
6.42 | 44-390-1-5,42 | 0.00 | 2.7 | 65.1 | 32.2 |
8.01 | 44-390-1-6,51 | 0.00 | 3.4 | 56.9 | 39.7 |
135.23 | 44-390-3-2,73 | 133.00 | 0.1 | 19.0 | 80.9 |
136.45 | 44-390-3-3,45 | 133.00 | 0.9 | 18.6 | 80.5 |
144.52 | 44-390-4-2,52 | 142.50 | 0.0 | 18.4 | 81.6 |
154.53 | 44-390-5-2,103 | 152.00 | 0.8 | 25.4 | 73.8 |