Bolli, Hans M; Ryan, William B F (2004): Grain size analysis of Hole 40-364 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.222196
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Bolli, Hans M; Ryan, William B F; Foresman, J B; Hottman, W E; Kagami, H; Longoria, J F; McKnight, B K; Melguen, M; Natland, J; Proto-Decima, F; Siesser, W G (1978): Initial Reports of the Deep Sea Drilling Project. U. S. Government Printing Office, XL, 1079 pp, https://doi.org/10.2973/dsdp.proc.40.1978
Further details:
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -11.572000 * Longitude: 11.971700
Date/Time Start: 1975-01-30T00:00:00 * Date/Time End: 1975-01-30T00:00:00
Minimum DEPTH, sediment/rock: 13.21 m * Maximum DEPTH, sediment/rock: 877.00 m
Event(s):
40-364 * Latitude: -11.572000 * Longitude: 11.971700 * Date/Time: 1975-01-30T00:00:00 * Elevation: -2448.0 m * Penetration: 1086 m * Recovery: 292.4 m * Location: South Atlantic/SYNCLINE * Campaign: Leg40 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 46 cores; 427.5 m cored; 0 m drilled; 68.4 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
200 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
13.21 | 40-364-1-4,96 | 7.50 | 1.1 | 22.1 | 76.8 |
16.13 | 40-364-1-6,88 | 7.50 | 0.7 | 15.3 | 84.0 |
69.88 | 40-364-3-4,88 | 64.50 | 1.4 | 15.3 | 83.3 |
72.88 | 40-364-3-6,88 | 64.50 | 0.4 | 14.4 | 85.2 |
108.28 | 40-364-4-4,88 | 102.50 | 0.1 | 19.5 | 80.4 |
111.28 | 40-364-4-6,88 | 102.50 | 0.4 | 11.9 | 87.7 |
155.38 | 40-364-5-4,88 | 150.00 | 0.0 | 13.9 | 86.1 |
198.38 | 40-364-6-1,88 | 197.50 | 0.4 | 16.4 | 83.2 |
205.88 | 40-364-6-6,88 | 197.50 | 0.3 | 19.5 | 80.2 |
245.88 | 40-364-7-1,88 | 245.00 | 2.4 | 38.7 | 58.9 |
288.68 | 40-364-8-4,88 | 283.00 | 0.1 | 59.0 | 40.9 |
291.68 | 40-364-8-6,88 | 283.00 | 0.2 | 38.4 | 61.4 |
326.38 | 40-364-9-4,88 | 321.00 | 5.9 | 38.1 | 56.0 |
354.88 | 40-364-10-4,88 | 349.50 | 0.4 | 31.0 | 68.6 |
357.88 | 40-364-10-6,88 | 349.50 | 0.1 | 31.4 | 68.5 |
364.68 | 40-364-11-4,88 | 359.00 | 0.1 | 19.6 | 80.3 |
367.68 | 40-364-11-6,88 | 359.00 | 0.1 | 23.9 | 76.0 |
374.18 | 40-364-12-4,88 | 368.50 | 1.0 | 32.4 | 66.6 |
377.18 | 40-364-12-6,88 | 368.50 | 0.3 | 29.4 | 70.3 |
399.58 | 40-364-13-2,108 | 397.00 | 0.1 | 18.2 | 81.7 |
430.88 | 40-364-14-4,88 | 425.50 | 0.1 | 64.5 | 35.4 |
433.88 | 40-364-14-6,88 | 425.50 | 0.1 | 23.6 | 76.3 |
468.88 | 40-364-15-4,88 | 463.50 | 0.2 | 33.5 | 66.3 |
506.88 | 40-364-16-4,88 | 501.50 | 0.1 | 30.0 | 69.9 |
509.88 | 40-364-16-6,88 | 501.50 | 0.2 | 30.5 | 69.3 |
535.83 | 40-364-17-4,88 | 530.00 | 0.1 | 33.4 | 66.5 |
538.83 | 40-364-17-6,88 | 530.00 | 0.0 | 34.4 | 65.6 |
573.38 | 40-364-19-4,88 | 568.00 | 1.7 | 38.1 | 60.2 |
582.88 | 40-364-20-4,88 | 577.50 | 0.0 | 23.5 | 76.5 |
601.93 | 40-364-21-4,78 | 596.50 | 2.0 | 34.4 | 63.6 |
605.03 | 40-364-21-6,88 | 596.50 | 2.5 | 39.6 | 57.9 |
620.88 | 40-364-22-4,88 | 615.50 | 0.0 | 31.0 | 69.0 |
649.38 | 40-364-23-4,88 | 644.00 | 2.9 | 31.5 | 65.6 |
674.88 | 40-364-24-2,88 | 672.50 | 0.6 | 26.5 | 72.9 |
709.87 | 40-364-25-6,102 | 701.00 | 2.5 | 49.5 | 48.0 |
716.18 | 40-364-26-4,78 | 710.50 | 3.0 | 24.8 | 72.2 |
718.94 | 40-364-26-6,54 | 710.50 | 5.8 | 40.0 | 54.2 |
725.15 | 40-364-27-4,65 | 720.00 | 1.0 | 28.2 | 70.8 |
848.58 | 40-364-33-4,58 | 843.50 | 8.4 | 35.8 | 55.8 |
877.00 | 40-364-34-4,50 | 872.00 | 2.5 | 34.7 | 62.8 |