Bolli, Hans M; Ryan, William B F (2004): Grain size analysis of Hole 40-363. PANGAEA, https://doi.org/10.1594/PANGAEA.222195
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Bolli, Hans M; Ryan, William B F; Foresman, J B; Hottman, W E; Kagami, H; Longoria, J F; McKnight, B K; Melguen, M; Natland, J; Proto-Decima, F; Siesser, W G (1978): Initial Reports of the Deep Sea Drilling Project. U. S. Government Printing Office, XL, 1079 pp, https://doi.org/10.2973/dsdp.proc.40.1978
Further details:
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -19.645800 * Longitude: 9.046700
Date/Time Start: 1975-01-24T00:00:00 * Date/Time End: 1975-01-24T00:00:00
Minimum DEPTH, sediment/rock: 36.83 m * Maximum DEPTH, sediment/rock: 656.81 m
Event(s):
40-363 * Latitude: -19.645800 * Longitude: 9.046700 * Date/Time: 1975-01-24T00:00:00 * Elevation: -2248.0 m * Penetration: 715 m * Recovery: 224.9 m * Location: South Atlantic/RIDGE * Campaign: Leg40 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 40 cores; 380 m cored; 0 m drilled; 59.2 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
200 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
36.83 | 40-363-1-4,88 | 31.00 | 8.1 | 35.9 | 56.0 |
39.83 | 40-363-1-6,88 | 31.00 | 12.7 | 28.2 | 59.1 |
55.38 | 40-363-2-4,88 | 50.00 | 7.3 | 30.3 | 62.4 |
91.98 | 40-363-4-3,98 | 88.00 | 7.2 | 36.7 | 56.1 |
112.38 | 40-363-5-4,88 | 107.00 | 0.4 | 38.1 | 61.5 |
131.38 | 40-363-6-4,88 | 126.00 | 0.2 | 76.2 | 23.6 |
188.38 | 40-363-9-4,88 | 183.00 | 2.4 | 46.2 | 51.4 |
207.81 | 40-363-10-4,88 | 202.00 | 3.6 | 47.3 | 49.1 |
210.81 | 40-363-10-6,88 | 202.00 | 1.3 | 49.9 | 48.8 |
226.78 | 40-363-11-4,88 | 221.00 | 2.3 | 46.2 | 51.5 |
229.78 | 40-363-11-6,88 | 221.00 | 2.5 | 39.6 | 57.9 |
245.78 | 40-363-12-4,88 | 240.00 | 4.9 | 50.3 | 44.8 |
248.78 | 40-363-12-6,88 | 240.00 | 2.6 | 51.4 | 46.0 |
264.38 | 40-363-13-4,88 | 259.00 | 3.9 | 61.2 | 34.9 |
283.78 | 40-363-14-4,88 | 278.00 | 3.1 | 52.4 | 44.5 |
286.78 | 40-363-14-6,88 | 278.00 | 7.3 | 44.5 | 48.3 |
300.88 | 40-363-15-3,88 | 297.00 | 1.9 | 49.7 | 48.4 |
308.88 | 40-363-16-2,88 | 306.50 | 1.4 | 33.6 | 65.0 |
318.38 | 40-363-17-2,88 | 316.00 | 6.7 | 33.8 | 59.5 |
330.88 | 40-363-18-4,88 | 325.50 | 2.4 | 31.4 | 66.2 |
340.38 | 40-363-19-4,88 | 335.00 | 3.8 | 32.7 | 63.5 |
343.38 | 40-363-19-6,88 | 335.00 | 2.3 | 29.6 | 68.1 |
367.48 | 40-363-21-3,68 | 363.50 | 1.1 | 36.7 | 62.2 |
368.46 | 40-363-21-4,16 | 363.50 | 0.5 | 40.2 | 59.3 |
372.18 | 40-363-21-6,88 | 363.50 | 2.4 | 38.3 | 59.3 |
374.37 | 40-363-22-1,137 | 373.00 | 0.4 | 22.5 | 77.1 |
384.88 | 40-363-23-2,88 | 382.50 | 0.7 | 37.6 | 61.7 |
403.88 | 40-363-24-2,88 | 401.50 | 0.5 | 28.5 | 71.0 |
422.94 | 40-363-25-2,94 | 420.50 | 0.2 | 32.0 | 67.8 |
444.88 | 40-363-26-4,88 | 439.50 | 1.7 | 48.3 | 50.0 |
459.38 | 40-363-27-1,88 | 458.50 | 1.4 | 46.1 | 52.5 |
483.41 | 40-363-28-4,101 | 477.50 | 0.7 | 38.0 | 61.3 |
485.95 | 40-363-28-6,55 | 477.50 | 0.2 | 31.2 | 68.6 |
502.69 | 40-363-29-4,129 | 496.50 | 3.0 | 58.2 | 38.8 |
505.04 | 40-363-29-6,64 | 496.50 | 2.3 | 60.1 | 37.6 |
521.07 | 40-363-30-4,82 | 515.50 | 4.6 | 52.6 | 42.8 |
542.69 | 40-363-31-6,69 | 534.50 | 1.3 | 48.2 | 50.5 |
558.72 | 40-363-32-4,72 | 553.50 | 4.2 | 66.4 | 29.4 |
653.61 | 40-363-37-4,61 | 648.50 | 6.3 | 58.6 | 35.1 |
656.81 | 40-363-37-6,81 | 648.50 | 1.5 | 51.0 | 47.5 |