Andrews, James E; Packham, Gordon (2004): Grain size analysis of Hole 30-288 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.222101
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Andrews, James E; Packham, Gordon; Eade, J V; Holdsworth, B K; Jones, D L; Klein, J; Kroenke, Loren W; Saito, T; Shafik, S; Stoeser, Douglas B; van der Lingen, Gerrit J (1975): Initial Reports of the Deep Sea Drilling Project 30. U. S. Government Printing Office, XXX, 753 pp, https://doi.org/10.2973/dsdp.proc.30.1975
Further details:
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -5.972500 * Longitude: 161.825500
Date/Time Start: 1973-05-21T00:00:00 * Date/Time End: 1973-05-21T00:00:00
Minimum DEPTH, sediment/rock: 2.33 m * Maximum DEPTH, sediment/rock: 171.93 m
Event(s):
30-288 * Latitude: -5.972500 * Longitude: 161.825500 * Date/Time: 1973-05-21T00:00:00 * Elevation: -3000.0 m * Penetration: 238 m * Recovery: 50.1 m * Location: South Pacific * Campaign: Leg30 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 11 cores; 98 m cored; 0 m drilled; 51.1 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
40 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
2.33 | 30-288-1-2,83 | 0.00 | 7.4 | 38.4 | 54.2 |
37.02 | 30-288-3-6,2 | 29.00 | 4.8 | 29.5 | 65.7 |
37.30 | 30-288-3-6,30 | 29.00 | 10.1 | 35.9 | 54.0 |
71.37 | 30-288-5-3,87 | 67.00 | 9.9 | 31.8 | 58.3 |
88.30 | 30-288-6-2,60 | 86.00 | 6.9 | 41.2 | 51.9 |
91.14 | 30-288-6-4,44 | 86.00 | 6.8 | 41.2 | 52.0 |
91.90 | 30-288-6-4,120 | 86.00 | 7.0 | 48.1 | 44.9 |
171.93 | 30-288-9-1,43 | 171.50 | 2.7 | 43.8 | 53.5 |