Andrews, James E; Packham, Gordon (2004): Grain size analysis of Hole 30-286 [dataset]. PANGAEA, https://doi.org/10.1594/PANGAEA.222099
Always quote citation above when using data! You can download the citation in several formats below.
Related to:
Andrews, James E; Packham, Gordon; Eade, J V; Holdsworth, B K; Jones, D L; Klein, J; Kroenke, Loren W; Saito, T; Shafik, S; Stoeser, Douglas B; van der Lingen, Gerrit J (1975): Initial Reports of the Deep Sea Drilling Project 30. U. S. Government Printing Office, XXX, 753 pp, https://doi.org/10.2973/dsdp.proc.30.1975
Further details:
Grain size data base - background and methods. hdl:10013/epic.32347.d001
Project(s):
Deep Sea Drilling Project (DSDP)
Coverage:
Latitude: -16.532000 * Longitude: 166.369700
Date/Time Start: 1973-05-07T00:00:00 * Date/Time End: 1973-05-07T00:00:00
Minimum DEPTH, sediment/rock: 1.62 m * Maximum DEPTH, sediment/rock: 513.30 m
Event(s):
30-286 * Latitude: -16.532000 * Longitude: 166.369700 * Date/Time: 1973-05-07T00:00:00 * Elevation: -4465.0 m * Penetration: 706 m * Recovery: 169.5 m * Location: South Pacific Ocean * Campaign: Leg30 * Basis: Glomar Challenger * Method/Device: Drilling/drill rig (DRILL) * Comment: 41 cores; 383 m cored; 0 m drilled; 44.3 % recovery
Parameter(s):
# | Name | Short Name | Unit | Principal Investigator | Method/Device | Comment |
---|---|---|---|---|---|---|
1 | DEPTH, sediment/rock | Depth sed | m | Geocode | ||
2 | Sample code/label | Sample label | DSDP/ODP/IODP sample designation | |||
3 | Section Top in meters below surface | Top | mbsf | |||
4 | Sand | Sand | % | size fraction greater than 62 µm | ||
5 | Silt | Silt | % | size fraction 62-4 µm | ||
6 | Size fraction < 0.004 mm, clay | <4 µm | % |
License:
Creative Commons Attribution 3.0 Unported (CC-BY-3.0)
Size:
75 data points
Data
1 Depth sed [m] | 2 Sample label | 3 Top [mbsf] | 4 Sand [%] | 5 Silt [%] | 6 <4 µm [%] |
---|---|---|---|---|---|
1.62 | 30-286-1-2,12 | 0.00 | 4.9 | 62.0 | 33.1 |
37.79 | 30-286-3-2,79 | 35.50 | 0.3 | 42.0 | 57.7 |
55.57 | 30-286-4-1,107 | 54.50 | 4.5 | 35.0 | 60.5 |
78.20 | 30-286-5-4,20 | 73.50 | 0.0 | 11.5 | 88.5 |
99.49 | 30-286-6-5,99 | 92.50 | 0.3 | 41.2 | 58.5 |
120.23 | 30-286-7-6,76 | 111.50 | 1.5 | 50.4 | 48.1 |
154.66 | 30-286-9-4,66 | 149.50 | 2.9 | 61.3 | 35.8 |
227.11 | 30-286-13-2,11 | 225.50 | 5.6 | 66.8 | 27.6 |
227.98 | 30-286-13-2,98 | 225.50 | 64.0 | 31.3 | 4.7 |
264.18 | 30-286-15-1,68 | 263.50 | 0.4 | 61.3 | 38.3 |
308.11 | 30-286-17-5,61 | 301.50 | 3.2 | 66.5 | 30.3 |
417.95 | 30-286-23-2,95 | 415.50 | 2.0 | 61.4 | 36.6 |
457.24 | 30-286-25-3,74 | 453.50 | 28.5 | 61.0 | 10.5 |
512.87 | 30-286-28-2,87 | 510.50 | 13.5 | 70.5 | 16.0 |
513.30 | 30-286-28-2,130 | 510.50 | 0.4 | 66.8 | 32.8 |